Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

80%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
126 FPS
Ultra 1080p Measured
54 FPS

1440p (2K / QHD)

Low 1440p Measured
87 FPS
Ultra 1440p Measured
37 FPS

4K (Ultra HD)

Low 4K Measured
51 FPS
Ultra 4K Measured
22 FPS
14.1ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 51,947
Graphics Card
Required 28,194
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 29 34 51
1440p QHD 37 49 58 87
1080p Full HD 54 71 85 126

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 71
1920x1080 Low 126
1920x1080 Medium 85
1920x1080 Ultra 54
2560x1440 High 49
2560x1440 Low 87
2560x1440 Medium 58
2560x1440 Ultra 37
3840x2160 High 29
3840x2160 Low 51
3840x2160 Medium 34
3840x2160 Ultra 22

Performance Analysis: Rust on Your System

The AMD Ryzen 9 5950X paired with the AMD Radeon RX 6600 presents a clear performance picture in Rust, one defined by resolution scaling and the GPU's 8 GB memory buffer. Measured data shows this combo is comfortable at 1080p, usable at 1440p with reduced settings, and not viable at 4K. The following analysis breaks down the exact frame rates, component roles, and optimal configurations based solely on the measured results.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. With Low settings, the average frame rate reaches 126 FPS, which is more than double the 60 FPS playable threshold. Moving to Medium settings, the average drops to 85 FPS, with a minimum of 72 FPS and a maximum of 97 FPS. High settings produce an average of 71 FPS, still above the threshold, but there is no min/max data recorded for this preset. Ultra settings fall short, averaging 54 FPS, which is below the playable mark.

At 2560x1440, performance degrades noticeably. Low settings maintain an average of 87 FPS, comfortably above 60 FPS. Medium settings average 58 FPS, with a minimum of 49 FPS and a maximum of 67 FPS, meaning the experience dips below the threshold during demanding scenes. High settings average 49 FPS, and Ultra settings drop to 37 FPS. Neither High nor Ultra has recorded min/max values, but the averages clearly indicate they are not suitable for smooth play.

At 3840x2160, the picture is much worse. Low settings average 51 FPS, just under the 60 FPS threshold. Medium settings average 34 FPS, with a minimum of 29 FPS and a maximum of 40 FPS. High settings average 29 FPS, and Ultra settings average 22 FPS. No resolution at 4K reaches a playable average, and the minimums on Medium confirm severe stuttering potential.

The scaling pattern is consistent: each step up in resolution costs roughly 40-50% of the average frame rate. For instance, Low settings go from 126 FPS at 1080p to 87 FPS at 1440p, then to 51 FPS at 4K. Similarly, Medium settings go from 85 FPS to 58 FPS to 34 FPS across the same resolution ladder. The gap between Low and Ultra at any given resolution is also substantial—at 1080p, that gap is 72 FPS; at 1440p, it is 50 FPS; at 4K, it is 29 FPS.

FAQ

Q: Can this PC run Rust at 1080p with High settings?

A: Yes. The measured average frame rate at 1920x1080 with High settings is 71 FPS, which exceeds the 60 FPS playable threshold. This is the best playable setting at this resolution.

Q: What is the highest playable setting at 1440p?

A: Only Low settings are playable at 2560x1440, with an average of 87 FPS. Medium settings average 58 FPS, which falls below the 60 FPS threshold, and High and Ultra are worse at 49 FPS and 37 FPS, respectively.

Q: Is 4K gaming possible with this hardware?

A: No. The best average at 3840x2160 is 51 FPS on Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra produce averages of 34 FPS, 29 FPS, and 22 FPS, respectively.

Q: How much performance is lost between Low and Ultra at 1080p?

A: At 1920x1080, Low settings average 126 FPS, while Ultra settings average 54 FPS. This represents a drop of 72 FPS, or roughly 57% of the Low setting's performance.

Q: Does the combo maintain 60 FPS in all tested scenarios?

A: No. The data shows 60 FPS or higher is achieved at 1080p Low, Medium, and High, and at 1440p Low. All other tested combinations—1080p Ultra, 1440p Medium/High/Ultra, and all 4K presets—fall below 60 FPS average.

Q: What is the minimum frame rate recorded across all tests?

A: The lowest minimum recorded is 29 FPS, which occurs at 3840x2160 with Medium settings. This is the only 4K preset with min/max data, but it indicates severe frame drops in that configuration.

CPU and GPU Roles

The data reveals a GPU-bound scenario at higher resolutions and a more balanced picture at lower ones. At 3840x2160, the RX 6600's 8 GB memory and 224.0 GB/s bandwidth become the limiting factor. The frame rate drops from 51 FPS on Low to 34 FPS on Medium, a 17 FPS penalty for one settings tier. This steep decline suggests the GPU's compute resources and memory bandwidth are overwhelmed by 4K pixel counts, regardless of CPU capability. The Ryzen 9 5950X, with 16 cores and 32 threads, is unlikely to be the bottleneck at this resolution; its heavy multi-threading headroom is irrelevant when the GPU cannot keep up.

At 2560x1440, the GPU still dominates, but the CPU starts to matter more. The difference between Low (87 FPS) and Medium (58 FPS) is 29 FPS, showing that settings changes have a larger impact than resolution changes from 1080p to 1440p. Interestingly, the 5950X's single-thread performance, as indicated by a Geekbench single-core score of 2083, is sufficient to feed the GPU at this resolution. The bottleneck is the RX 6600's shading units (1792) and texture units (112), which struggle with the increased fragment work.

At 1920x1080, the CPU and GPU roles are more balanced. Low settings hit 126 FPS, which is high enough that even a strong CPU like the 5950X could become a limiting factor in certain scenes, though the measured data does not isolate CPU vs GPU usage. The drop from 126 FPS on Low to 85 FPS on Medium suggests the GPU is still the primary constraint, as CPU-bound scenarios typically show less scaling with settings. The 5950X's Cinebench R23 multi-core score of 26017 indicates it has ample headroom for Rust's server-side and simulation threads, but the frame rates are capped by the GPU's 8.928 TFLOPS FP32 throughput.

The verdict by resolution confirms this split: at 1080p, three presets (Low, Medium, High) clear 60 FPS, meaning the GPU has enough power for typical play. At 1440p, only Low clears 60 FPS, showing the GPU's limits. At 4K, no preset clears 60 FPS, making the GPU the definitive bottleneck. The CPU's role is secondary—it provides the foundation for consistent frame pacing, but it cannot overcome the GPU's resolution scaling limits.

Similar Performance Alternatives

Looking at the CPU's nearest rivals, the AMD Ryzen 9 5950X is closely matched by several Intel and AMD parts. The Intel Core Ultra 5 235HX scores 52073 on average, a delta of -0.2% compared to the 5950X's 51947 average. The AMD EPYC 8124P scores 52121, a -0.3% delta. The Intel Core i9-13900F scores 51730, a +0.4% delta, meaning it is slightly slower. The Intel Core i7-14700 scores 52301, a -0.7% delta, meaning it is slightly faster. For Rust, any of these CPUs would produce nearly identical frame rates in GPU-bound scenarios, as the differences are within 1%.

For the GPU, the AMD Radeon RX 6600's nearest rivals include the NVIDIA Quadro K6000, which scores 19030 on average (0% delta), the NVIDIA GeForce RTX 4050 Mobile at 19049 (-0.1% delta), the NVIDIA Tesla K20m at 19089 (-0.3% delta), and the NVIDIA RTX 2000 Ada Generation at 18954 (+0.4% delta). In practice, a desktop RTX 4050 would perform similarly to the RX 6600 in Rust, though mobile variants may have different power limits. The Quadro K6000, despite its age, matches the RX 6600's average score, but its driver support and memory architecture may affect real-world Rust performance differently. The RTX 2000 Ada Generation is a workstation card with similar compute, but its niche drivers could impact gaming. For gamers, the RTX 4050 Mobile is the closest mainstream alternative, though its performance would depend on the laptop's cooling and power delivery.

These rival comparisons show that the combo's performance is not unique. A system with an Intel Core i7-14700 and an RTX 4050 Mobile would likely produce frame rates within 1-2% of the 5950X + RX 6600 in Rust, assuming similar GPU clocks and memory speeds. The 5950X's advantage in multi-threaded benchmarks (PassMark multi-thread score of 45424) does not translate to Rust gains, as the game is not heavily multi-threaded beyond a few cores.

The Verdict

This PC can run Rust at 1080p and 1440p, but with clear caveats. At 1920x1080, the data shows playable settings include High (71 FPS), Low (126 FPS), and Medium (85 FPS). Ultra is not playable, averaging 54 FPS. The best playable setting at 1080p is High, with an average of 71 FPS, which provides a comfortable margin above the 60 FPS threshold.

At 2560x1440, only Low settings are playable, averaging 87 FPS. Medium averages 58 FPS, which is below the threshold, and High (49 FPS) and Ultra (37 FPS) are not viable. The verdict for 1440p is a single playable preset, meaning users must sacrifice visual quality to maintain smooth gameplay.

At 3840x2160, there are no playable settings. The best average is 51 FPS on Low, which is 9 FPS short of the threshold. The verdict is clear: 4K is not an option for this combo in Rust, and even Low settings will produce frame rates that dip below 60 FPS during intense scenes.

For a player targeting 60 FPS, the recommended path is 1080p with High settings, or 1440p with Low settings. The 5950X's CPU power is not the limiting factor; the RX 6600's GPU performance is. Upgrading the GPU would be the logical step for higher resolutions or higher presets.

How This Combo Ranks

The combo ranks 2900 out of 3723 tested combinations in Rust. This places it in the lower-middle tier of all systems tested, which is consistent with the GPU's 63rd percentile against all GPUs and the CPU's 91st percentile against all CPUs. The high-ranking CPU is held back by the mid-range GPU, resulting in a system that performs well at 1080p but struggles at higher resolutions.

The rank of 2900 out of 3723 means that roughly 22% of tested combos perform worse, and 78% perform better. This is not surprising given the RX 6600's position in the GPU hierarchy—it is a 1080p-class card, and Rust's demanding nature at higher resolutions pushes it beyond its comfort zone. The 5950X's strong CPU scores (e.g., 26017 in Cinebench R23 multi-core) do not boost the combo's ranking because Rust's frame rates at 1440p and 4K are GPU-limited.

In absolute terms, the combo is playable at 1080p High, which is a common target for competitive survival games. The ranking reflects that while the CPU is overkill for this GPU, the combo still delivers acceptable performance for its intended resolution class. For users with a 1080p monitor, this is a solid pairing; for 1440p or 4K displays, it falls short.

Best Settings per Resolution

At 1920x1080, the best playable setting is High, with an average of 71 FPS. This is the most demanding preset that stays at or above 60 FPS. Medium (85 FPS) and Low (126 FPS) are also playable, but High offers the best visual quality while maintaining a 71 FPS average, leaving an 11 FPS buffer above the threshold.

At 2560x1440, the best playable setting is Low, with an average of 87 FPS. This is the only preset that clears 60 FPS; Medium averages 58 FPS, which is 2 FPS short. The Low preset provides a large margin of safety with 27 FPS of headroom, but it requires significant visual compromises.

At 3840x2160, there is no best setting because no preset reaches 60 FPS. The closest is Low at 51 FPS, but that is 9 FPS short. Users should not attempt 4K with this combo if they require 60 FPS, as even the lowest settings cannot achieve it.

The data suggests that for this combo, the optimal experience is 1080p High, which balances visual fidelity with performance. At 1440p, Low is the only option for smooth play, and at 4K, users should lower their expectations or upgrade the GPU.