Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 35 | 41 | 62 |
| 1440p QHD | 45 | 59 | 70 | 104 |
| 1080p Full HD | 65 | 86 | 102 | 151 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 9 5900X and AMD Radeon RX 9060 combination delivers a wide range of performance across Rust’s presets, with playable frame rates depending heavily on resolution. At 1080p, the combo clears 60 FPS on every preset, while 1440p remains playable up to Medium settings, and 4K only manages a 60 FPS average on Low. The data shows a system that is well-balanced for mainstream gaming, but one that requires settings discipline at higher resolutions to maintain smooth gameplay.
Similar Performance Alternatives
The Ryzen 9 5900X sits in a dense performance cluster. Its average benchmark score of 41,376 places it within 0.5% of four closely matched rivals. The Intel Core i7-14650HX is the nearest competitor at 41,576, trailing by just 0.5%, while the Intel Core Ultra 7 366H (41,263) and Intel Core Ultra 7 356H (41,215) are both within 0.4% ahead. The AMD Ryzen AI 5 PRO 440 (41,208) also lands in the same band, just 0.4% ahead. For CPU-bound tasks in Rust, any of these processors would produce nearly indistinguishable frame pacing, as the performance delta is negligible in real-world gaming scenarios.
On the GPU side, the Radeon RX 9060’s average score of 16,014 places it in a similarly tight grouping. The NVIDIA GeForce RTX 3060 Ti (16,129) leads by 0.7%, making it the closest direct alternative. The AMD Radeon RX 7700 (15,852) sits 1% behind, while the Radeon R9 370X (15,862) is also 1% behind. The AMD Radeon Pro W5500 (15,679) trails by 2.1%. This means that swapping the RX 9060 for any of these cards would yield nearly identical rasterization performance in Rust, with differences well below the threshold of perceptible frame rate variation.
The CPU’s 87th percentile ranking among all tested processors and the GPU’s 59th percentile ranking indicate that the processor is the stronger component in this pairing. However, because the rivals are so tightly bunched, users upgrading from any of the listed alternatives would see minimal gains. The data suggests that this combination is not a performance outlier but rather a stable, mid-range configuration that competes directly with several other popular hardware pairings.
How This Combo Ranks
Within the database of 3,723 tested combinations for Rust, this CPU-GPU pairing ranks 2,190th. This places it in the 41st percentile of all tested combos, meaning roughly 59% of tested systems deliver higher average frame rates. The rank reflects the GPU’s modest 59th percentile standing, which drags the overall combo down despite the CPU’s strong 87th percentile score.
The rank is not fixed across settings, however. At 1080p Low, the combo achieves 151 FPS, which would place it much higher in the rankings than its overall position suggests. Conversely, at 4K Ultra, the 27 FPS average would rank it near the bottom of the database. The overall rank therefore represents a compromise across all tested configurations, and the actual in-game experience depends entirely on the resolution and preset selected.
Given that the GPU is the limiting factor at higher resolutions, the rank improves at 1080p where the CPU can stretch its legs. The 12-core, 24-thread Ryzen 9 5900X provides ample headroom for Rust’s simulation and entity processing, but the RX 9060’s 8 GB VRAM and 128-bit memory bus become bottlenecks as pixel count rises. The result is a combo that performs above its aggregate rank at low resolutions and below it at high resolutions.
Measured FPS Breakdown
The measured FPS data reveals a clear scaling pattern across resolutions and presets. At 1920x1080, the combo delivers its strongest performance. Low settings produce an average of 151 FPS, Medium drops to 102 FPS, High reaches 86 FPS, and Ultra settles at 65 FPS. The Medium preset shows a minimum of 86 FPS and a maximum of 117 FPS, indicating consistent frame delivery without major dips.
Moving to 2560x1440, the performance degrades proportionally. Low settings average 104 FPS, Medium 70 FPS, High 59 FPS, and Ultra 45 FPS. The Medium preset at this resolution shows a minimum of 59 FPS and a maximum of 80 FPS, meaning the average is just above the playable threshold but individual frames can dip below it. High and Ultra both fail to maintain 60 FPS averages.
At 3840x2160, the GPU is clearly overextended. Low settings average 62 FPS, which is barely playable, while Medium drops to 41 FPS with a minimum of 35 FPS and a maximum of 47 FPS. High averages 35 FPS, and Ultra averages 27 FPS. The gap between Low and Medium at 4K is 21 FPS, showing that the RX 9060 has very little headroom once pixel count increases.
The scaling from 1080p to 1440p at Medium settings shows a 32 FPS drop (102 to 70), and from 1440p to 4K at Medium settings shows a 29 FPS drop (70 to 41). This consistent degradation pattern indicates that the GPU is the primary constraint at all resolutions above 1080p, with the CPU playing a diminishing role as resolution increases.
The Verdict
The verdict data is clear: this PC can run Rust, but the playable settings vary significantly by resolution. At 1920x1080, all four presets are playable, with Ultra averaging 65 FPS, which clears the 60 FPS threshold with a slight margin. The best settings at this resolution are Ultra, and the average FPS at that preset is 65.
At 2560x1440, only Low and Medium are playable. Low averages 104 FPS, while Medium averages 70 FPS. High (59 FPS) and Ultra (45 FPS) both fall below the playable threshold. The best settings at this resolution are Medium, with an average of 70 FPS.
At 3840x2160, only Low is playable, averaging 62 FPS. Medium (41 FPS), High (35 FPS), and Ultra (27 FPS) all fail to reach 60 FPS. The best settings at this resolution are Low, with an average of 62 FPS. The verdict is that the system is fully capable of smooth gameplay at 1080p, adequately capable at 1440p with settings compromises, and only marginally playable at 4K on the lowest preset.
CPU and GPU Roles
The data shows a clear shift in component importance as resolution changes. At 1080p, the CPU’s strong single-thread performance (3,469 in Passmark) and multi-thread capability (39,002 in Passmark) allow the GPU to work at peak efficiency. The 151 FPS at Low settings suggests the CPU is feeding frames faster than the GPU can render them, making the GPU the bottleneck even at 1080p. However, the 65 FPS at Ultra shows that the GPU can still keep pace with the CPU’s output when settings are maxed.
At 1440p, the GPU becomes the dominant constraint. The 104 FPS at Low versus 70 FPS at Medium represents a 34 FPS drop, while the CPU’s workload remains constant. This indicates that pixel throughput is the limiting factor, not processing power. The Ryzen 9 5900X’s 12 cores and 24 threads are more than sufficient for Rust’s server-side simulation and entity management, but the RX 9060’s 288 GB/s bandwidth and 8 GB VRAM cannot sustain high detail levels at this resolution.
At 4K, the GPU is overwhelmingly the bottleneck. The drop from 62 FPS at Low to 41 FPS at Medium is a 34% reduction, while the CPU continues to idle with headroom. The 27 FPS at Ultra demonstrates that the GPU is rendering less than half the frames the CPU could potentially support. The data indicates that upgrading the GPU would yield significant gains at 1440p and 4K, while upgrading the CPU would have minimal impact at any resolution above 1080p.
FAQ
Q: Can this system run Rust at 1440p with High settings?
A: No. The measured average FPS at 2560x1440 with High settings is 59, which is just below the 60 FPS playable threshold. Medium settings average 70 FPS, making it the highest playable preset at this resolution.
Q: What is the best 4K preset for this combination?
A: Low settings are the only playable option at 3840x2160, averaging 62 FPS. Medium averages 41 FPS, which falls well below the playable threshold.
Q: How does the RX 9060 compare to the RTX 3060 Ti?
A: The RTX 3060 Ti has an average benchmark score of 16,129, which is 0.7% higher than the RX 9060’s 16,014. This translates to a negligible frame rate difference in practice.
Q: Is the Ryzen 9 5900X a bottleneck for this GPU?
A: The data suggests no. The CPU ranks in the 87th percentile of all processors, and its Passmark multi-thread score of 39,002 provides substantial headroom. At 1080p and 1440p, the GPU is the limiting factor, not the CPU.
Q: What frame rate can I expect at 1080p with Medium settings?
A: The measured average is 102 FPS, with a minimum of 86 FPS and a maximum of 117 FPS. This provides a smooth experience with no significant dips below the playable threshold.
Q: Does the combo’s overall rank of 2,190 out of 3,723 reflect its 1080p performance?
A: No. The rank is an aggregate across all resolutions and presets. At 1080p Low, the combo achieves 151 FPS, which would rank much higher than the aggregate position suggests. The rank is dragged down by poor 4K performance, particularly the 27 FPS average at Ultra.
Best Settings per Resolution
At 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, which averages 65 FPS. This provides the highest visual quality while still clearing the playable threshold with a 5 FPS margin. The data shows that Ultra is a viable option at this resolution, and the 65 FPS average indicates that the system has sufficient headroom for most gameplay scenarios.
At 2560x1440, the most demanding playable preset is Medium, averaging 70 FPS. High settings fall just short at 59 FPS, so Medium is the recommended choice for a stable 60 FPS experience. The 70 FPS average provides a comfortable buffer, though the minimum of 59 FPS suggests occasional dips below the threshold during intense scenes.
At 3840x2160, the only playable preset is Low, averaging 62 FPS. This is a marginal result, with only a 2 FPS margin above the playable threshold. The recommendation is to use Low settings at 4K, but users seeking a more consistent experience should consider dropping to 1440p Medium, which offers both higher frame rates and better visual fidelity than 4K Low.