Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Try lowering shadows and anti-aliasing for better FPS.
A better graphics card would significantly improve performance.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 15 | 20 | 27 |
| 1440p QHD | 21 | 27 | 32 | 45 |
| 1080p Full HD | 29 | 36 | 44 | 68 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The pairing of a twelve-core Ryzen 9 5900X with a Radeon RX 570 is a strikingly lopsided build: a CPU that sits in the 87th percentile of all processors in the database against a GPU in the 74th percentile but one generation behind in features and memory capacity. Rust, a survival title with large procedural worlds and heavy draw distance demands, exposes that imbalance immediately. The recorded data shows exactly one configuration out of twelve that clears the 60 FPS playable threshold, and it lives entirely at 1080p on the lowest preset.
Measured FPS Breakdown
Starting at 1920x1080, the measured averages tell a clear story of a GPU running out of headroom. Low settings delivers 68 FPS on average, the only result in the entire dataset above the 60 FPS threshold. Medium drops to 44 FPS, a fall of over a third from Low. High lands at 35.8 FPS, and Ultra manages just 29 FPS. Even at the least demanding resolution the RX 570 cannot push Rust past the playable line once the preset rises above Low.
At 2560x1440 the situation deteriorates further. Low manages 45.1 FPS, Medium 32.1, High 27.1, and Ultra 20.8. Note the compression of the curve: the gap between Low and Ultra at 1440p is roughly 24 FPS, versus roughly 39 FPS at 1080p, which indicates the 4 GB of GDDR5 and the 224 GB/s of memory bandwidth are becoming the limiting factor rather than raw shader throughput alone.
At 3840x2160 the results are effectively slideshow territory. Ultra bottoms out at 12.6 FPS, High at 14.6, Medium at 20.1, and Low at 26.8. Four times the pixels of 1080p cuts the Low-setting average from 68 FPS to 26.8, a reduction of over sixty percent, which is consistent with a GPU-bound scenario from top to bottom. Minimum and maximum frame rates were not captured for these runs, so the averages are the full picture here, and in an open-world survival game averages typically flatter the experience: dips below these numbers during raids or dense base areas should be expected.
Best Settings per Resolution
The playable preset selection is short. At 1920x1080, Low is the only preset that stays at or above 60 FPS, at an average of exactly 68 FPS. That is the single recommended configuration in the dataset.
At 2560x1440 there is no qualifying preset. The best recorded average is Low at 45.1 FPS, which sits well short of the threshold, a shortfall of roughly 15 frames.
At 3840x2160 the answer is the same in bleaker terms. Low peaks at 26.8 FPS, less than half the playable rate, and no amount of preset selection within the tested range changes that.
Practical takeaway: play at 1080p on Low. If a steadier frame rate is wanted, 1080p Low is also the only setting with margin above 60, offering eight frames of cushion over the threshold before average performance dips into unplayable territory.
Similar Performance Alternatives
On the CPU side, the Ryzen 9 5900X sits in a tight cluster of rivals according to the database. The Intel Core Ultra 7 366H averages within 0.3 percent, the Intel Core Ultra 7 356H within 0.4 percent, and the AMD Ryzen AI 5 PRO 440 also within 0.4 percent. The Intel Core i7-14650HX is marginally faster, at 0.5 percent ahead. Any of these processors would deliver effectively identical Rust performance in this GPU-bound configuration, and none of them would change the outcome: the game is not waiting on the CPU.
On the GPU side, the nearest rivals are more varied in naming but similar in measured strength. The AMD Radeon RX 6800M scores within 0.4 percent of the RX 570's average, the AMD Radeon R9 M295X within 0.7 percent, the AMD Radeon RX 470 within 0.8 percent, and the NVIDIA Quadro RTX 8000 within 1.2 percent. The RX 470 comparison is the most intuitive, being the direct predecessor of the same Polaris family, and the data confirms near-identical aggregate performance. Anyone running one of these alternatives should expect the same Rust frame rates recorded here: roughly 60-plus FPS only at 1080p Low, with every other resolution and preset combination falling short.
The Verdict
Can this PC run Rust? Yes, but only in one narrow configuration. At 1920x1080 on Low settings the combo averages 68 FPS and clears the 60 FPS playable threshold. That is the extent of the good news.
At 2560x1440 no preset is playable, with the best result being Low at 45.1 FPS. At 3840x2160 no preset is playable either, topping out at 26.8 FPS on Low. High and Ultra presets are off the table at every resolution tested, never exceeding 35.8 FPS even at 1080p.
For a survival game like Rust, where encounters can swing on reaction time, the 1080p Low setup is genuinely serviceable, and the Ryzen 9 5900X with its 12 cores and 24 threads ensures the simulation side of the game never becomes the bottleneck. The GPU is the gatekeeper, and the verdict reflects that: playable at one resolution, one preset, nothing else.
CPU and GPU Roles
The division of labor in this pairing could not be clearer. The Ryzen 9 5900X posts a single-thread Passmark score of 3469, a Geekbench single-core score of 2083, and a Cinebench R23 multi-core score of 16262, numbers that place it in the 87th percentile of all CPUs in the database. It has far more processing power than Rust requires for game logic, world streaming, and physics.
The scaling data proves where the ceiling sits. Moving from 1080p Low to 1440p Low cuts the average from 68 to 45.1 FPS purely by increasing pixel count, with identical settings. Moving to 4K Low cuts it again to 26.8 FPS. When frame rate collapses in direct proportion to resolution while the CPU workload is essentially unchanged, the GPU is the binding constraint at every resolution and every preset. Dropping from High to Low at 1080p recovers performance from 35.8 to 68 FPS, nearly doubling the frame rate without touching the CPU at all, which reinforces the same conclusion.
At 1080p the RX 570 with its 2048 shading units and 5.095 TFLOPS of FP32 throughput is already saturated. The 4 GB framebuffer and 224 GB/s bandwidth limit how far the card can be pushed, particularly in a title with long view distances like Rust. In short: the CPU is never the limiting component in this build at any resolution, and the GPU is always the limiting component, including at the lowest settings and lowest resolution tested.
How This Combo Ranks
Within the database, this pairing ranks 3537 out of 3723 tested combinations for Rust. That places it in the bottom few percent of configurations measured for this game, a direct consequence of pairing an end-of-life Polaris card, a 14 nm design originally positioned as a mid-range offering with a launch MSRP of 169 USD, against a CPU that launched at 549 USD and remains competitive with current-generation mobile parts.
The rank is not a statement about the CPU. The Ryzen 5900X, built on TSMC's 7 nm process with 64 MB of L3 cache and PCIe Gen 4 support, is doing nothing wrong here. The rank reflects the GPU: the RX 570 is an end-of-life part that the database places alongside the RX 470 and older hardware in aggregate scoring, and Rust's demands at 1440p and 4K are simply beyond it. Anyone ranking builds for Rust should read this entry as the canonical example of a CPU-heavy, GPU-light imbalance: strong simulation hardware attached to a renderer that caps the experience at 1080p Low.