Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
277 FPS
Ultra 1080p Measured
150 FPS

1440p (2K / QHD)

Low 1440p Measured
239 FPS
Ultra 1440p Measured
103 FPS

4K (Ultra HD)

Low 4K Measured
141 FPS
Ultra 4K Measured
61 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 58,386
Graphics Card
Required 28,194
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 61 80 95 141
1440p QHD 103 136 161 239
1080p Full HD 150 197 233 277

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 197
1920x1080 Low 277
1920x1080 Medium 233
1920x1080 Ultra 150
2560x1440 High 136
2560x1440 Low 239
2560x1440 Medium 161
2560x1440 Ultra 103
3840x2160 High 80
3840x2160 Low 141
3840x2160 Medium 95
3840x2160 Ultra 61

Performance Analysis: Rust on Your System

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 5090 D delivers an exceptional Rust experience across all tested resolutions and presets. This combination produces frame rates that far exceed the 60 FPS playability threshold, with even the most demanding Ultra preset at 4K maintaining an average of 61 FPS. The data reveals a system where the GPU consistently scales well with resolution increases, while the CPU's strong single-threaded performance—evidenced by a Cinebench R23 single-core score of 2228—ensures high frame rates remain stable even at lower resolutions where CPU overhead typically becomes a limiting factor.

Measured FPS Breakdown

At 1920x1080, the system demonstrates exceptional headroom across all settings. The Low preset produces an average of 277 FPS, representing the highest measured frame rate in the entire dataset. Medium settings yield 233 FPS average with a minimum of 198 FPS and maximum of 268 FPS, showing tight frame pacing even under load. The High preset averages 197 FPS, while Ultra still achieves 150 FPS average. These numbers indicate the RTX 5090 D is not the primary constraint at 1080p; instead, the Ryzen 7 9850X3D's performance—ranking in the 92nd percentile among all CPUs—allows the GPU to operate without bottlenecking.

Moving to 2560x1440, the frame rates remain remarkably high. The Low preset averages 239 FPS, which represents a 13.7 percent reduction from the 1080p result. Medium settings deliver 161 FPS average with a minimum of 136 FPS and maximum of 185 FPS. High averages 136 FPS, and Ultra maintains 103 FPS average. The scaling from 1080p to 1440p shows a consistent performance drop of approximately 30 percent across presets, which aligns with the increased pixel count of 78 percent more pixels requiring GPU processing.

At 3840x2160, the system still comfortably exceeds 60 FPS at every preset. The Low preset averages 141 FPS, Medium averages 95 FPS with a minimum of 81 FPS and maximum of 109 FPS, and High averages 80 FPS. The Ultra preset averages 61 FPS, placing it just above the playability threshold. The scaling from 1440p to 4K shows an additional 40 percent average frame rate reduction, reflecting the 2.25x pixel count increase from 1440p. Notably, the minimum FPS at 4K Medium (81 FPS) remains well above the 60 FPS threshold, suggesting consistent frame delivery even in demanding scenes.

The data shows that the gap between Low and Ultra presets widens with increasing resolution. At 1080p, the delta between Low and Ultra is 127 FPS; at 1440p, it grows to 136 FPS; at 4K, it reaches 80 FPS. This pattern indicates that the RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth provide sufficient resources for high-resolution rendering, while the CPU's 96 MB of shared L3 cache helps maintain responsiveness across all settings.

Similar Performance Alternatives

The CPU's nearest rivals provide context for its benchmark positioning. The Intel Xeon Platinum 8260M scores 58323, a mere 0.1 percent below the Ryzen 7 9850X3D's average benchmark score of 58386. The Intel Xeon w5-2545 scores 58504, placing it 0.2 percent above. The Intel Core i9-14900 scores 58115, which is 0.5 percent lower, while the AMD Ryzen AI 9 HX 470 scores 58826, representing a 0.7 percent advantage. These deltas are all within one percent, indicating that for synthetic benchmarks, these four processors would deliver nearly identical raw compute performance in Rust's CPU-bound scenarios.

For the GPU, the nearest rivals show a similar clustering. The AMD Radeon RX 6650M XT scores 76904, just 1.1 percent below the RTX 5090 D's average benchmark score of 77712. The AMD Radeon RX 6850M XT scores 78940, which is 1.6 percent higher. The NVIDIA Tesla P100 PCIe 12 GB scores 79396 (2.1 percent higher), and the Tesla P100 PCIe 16 GB scores 79605 (2.4 percent higher). However, these GPU rivals are mobile or compute-oriented parts; the RTX 5090 D's 32 GB VRAM and 104.8 TFLOPS FP32 throughput place it in a different class for gaming workloads, even if aggregate benchmark scores appear similar.

The practical implication is that users seeking comparable Rust performance could consider systems built around these rival CPUs, as the sub-one-percent benchmark delta would translate to imperceptible frame rate differences. For the GPU, the Radeon RX 6850M XT's slightly higher benchmark score might suggest competitive rasterization, but the RTX 5090 D's architectural advantages—including 170 ray tracing cores and 680 tensor cores—would likely provide superior features in Rust's evolving rendering pipeline.

FAQ

Q: Can this system run Rust at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 Ultra is 61 FPS, which exceeds the 60 FPS playability threshold. This is the most demanding configuration tested and it remains playable.

Q: What is the highest frame rate this combo achieves?

A: The maximum measured average is 277 FPS at 1920x1080 with Low settings. The highest recorded maximum FPS is 268 FPS, observed at 1080p Medium.

Q: How does the CPU's benchmark performance compare to its nearest rivals?

A: The Ryzen 7 9850X3D scores 58386 on average. Its closest rival, the Intel Xeon Platinum 8260M, scores 58323, a 0.1 percent difference. The Intel Core i9-14900 trails by 0.5 percent, while the AMD Ryzen AI 9 HX 470 leads by 0.7 percent.

Q: Does the system maintain 60 FPS even at minimum frame rates?

A: At 4K Medium, the minimum FPS is 81, and at 1440p Medium, the minimum is 136 FPS. At 1080p Medium, the minimum is 198 FPS. All measured minimums remain well above 60 FPS.

Q: What GPU benchmark score places the RTX 5090 D relative to its rivals?

A: The RTX 5090 D averages 77712. The AMD Radeon RX 6650M XT is 1.1 percent lower at 76904, while the AMD Radeon RX 6850M XT is 1.6 percent higher at 78940.

Q: Is the 1080p Low preset the fastest configuration?

A: Yes, with 277 FPS average, it is the highest measured frame rate. However, the 1080p Ultra preset still delivers 150 FPS, demonstrating substantial headroom.

The Verdict

The verdict is unambiguous: this PC runs Rust at playable frame rates across every resolution and preset combination tested. At 3840x2160, all four settings—Low, Medium, High, and Ultra—are listed as playable, with the Ultra preset averaging 61 FPS. This is the critical test, as it represents the maximum visual fidelity configuration. The 2560x1440 results show even greater headroom: Ultra averages 103 FPS, meaning the system could potentially handle future graphical updates or additional background tasks without dropping below 60 FPS. At 1920x1080, the Ultra preset averages 150 FPS, which is 2.5 times the playability threshold.

The data confirms that no resolution or preset combination falls below 60 FPS. The lowest measured average is 61 FPS at 4K Ultra, and the lowest minimum FPS is 81 FPS at 4K Medium. This suggests the system has consistent performance delivery rather than just high averages with occasional dips. The combination of the CPU's 92nd percentile ranking and the GPU's 92nd percentile ranking creates a balanced system where neither component consistently bottlenecks the other.

For users with 4K displays, the Ultra preset is viable, though the 61 FPS average leaves minimal headroom for demanding in-game situations like large player bases or intense firefights. The Medium preset at 4K offers a safer margin with 95 FPS average and 81 FPS minimum. At 1440p and 1080p, users can enable Ultra settings without any concern, as the frame rates are 103 FPS and 150 FPS respectively.

How This Combo Ranks

This specific combination ranks 9th out of 3723 tested combos in Rust. This places the system in the top 0.24 percent of all tested configurations, indicating that only eight other hardware combinations deliver higher Rust performance. The ranking reflects the synergy between the Ryzen 7 9850X3D and RTX 5090 D, where the CPU's 96 MB L3 cache and high single-core performance complement the GPU's massive memory bandwidth and shading capability.

The rank of 9 among 3723 combos suggests that the system is near the absolute peak of Rust performance, but not the very top. The gap between this combo and the top-ranked ones likely stems from either slightly faster CPU variants or GPU configurations with higher boost clocks, though the exact specifications of those top combos are not in the dataset. For practical purposes, a rank of 9 means this system will deliver Rust performance that is effectively indistinguishable from the fastest available systems, with frame rates limited primarily by the game engine's rendering efficiency rather than hardware constraints.

The percentile rankings support this high placement: the CPU sits in the 92nd percentile of all CPUs, and the GPU also sits in the 92nd percentile of all GPUs. When two components at the 92nd percentile are paired, the resulting system performance typically exceeds either component's individual percentile, as evidenced by the top-0.24 percent overall ranking.

Best Settings per Resolution

At 3840x2160, the best settings that maintain at least 60 FPS average are Ultra, which produces 61 FPS. This is the most demanding preset tested, and it clears the threshold by just 1 FPS. Users who prefer a safety margin might choose High at 80 FPS or Medium at 95 FPS, but the data confirms Ultra is technically playable.

At 2560x1440, Ultra settings are also the best choice, delivering 103 FPS average. This represents a 69 percent increase over the 4K Ultra result, demonstrating how resolution scaling affects the GPU workload. The 1440p Ultra configuration provides both high visual quality and substantial frame rate headroom for competitive play.

At 1920x1080, Ultra settings achieve 150 FPS average. This is the optimal configuration for high-refresh-rate monitors, as the frame rate comfortably exceeds typical 144 Hz displays. Even the minimum FPS at 1080p Medium (198 FPS) exceeds 144 FPS, suggesting that users with 144 Hz monitors could enable Medium settings for maximum smoothness or Ultra for better visuals without sacrificing refresh rate coverage.

The recommended settings per resolution are therefore: 4K Ultra (61 FPS), 1440p Ultra (103 FPS), and 1080p Ultra (150 FPS). These are the most visually demanding presets that still clear the 60 FPS threshold, providing the best balance of image quality and performance.

CPU and GPU Roles

The data reveals distinct scaling patterns that illuminate the respective roles of the CPU and GPU in Rust. Comparing the 1080p Low result (277 FPS) to the 4K Low result (141 FPS) shows a 49 percent reduction, while the 1080p Ultra result (150 FPS) to 4K Ultra (61 FPS) shows a 59 percent reduction. This widening gap at higher presets indicates that the GPU becomes increasingly dominant as both resolution and graphical complexity increase.

At 1080p Low, the system achieves 277 FPS, which is likely near the engine's frame rate ceiling. This suggests the CPU is the limiting factor at this configuration, as the RTX 5090 D has significant unused capacity when rendering at Low settings with relatively few pixels. The Ryzen 7 9850X3D's single-thread score of 2228 in Cinebench R23 and its 4.70 GHz base clock / 5.60 GHz boost clock provide the per-core performance necessary to drive high frame rates, but even this CPU cannot push beyond 277 FPS in Rust's simulation-heavy gameplay.

As resolution increases to 1440p and 4K, the GPU's role expands. The RTX 5090 D's 32 GB GDDR7 memory and 1.79 TB/s bandwidth become critical for handling the larger frame buffers and texture sets. The scaling from 1080p to 1440p at Ultra (150 to 103 FPS, a 31 percent drop) and from 1440p to 4K at Ultra (103 to 61 FPS, a 41 percent drop) shows that the GPU workload grows non-linearly with pixel count. The CPU's contribution remains important but becomes less dominant, as the frame rates are no longer constrained by per-core throughput.

The minimum FPS data further illustrates this division. At 4K Medium, the minimum is 81 FPS (85 percent of the average), while at 1080p Medium, the minimum is 198 FPS (85 percent of the average). The consistent ratio between minimum and average FPS across resolutions suggests that the game's frame pacing is stable regardless of which component is the primary bottleneck, indicating that both the CPU and GPU maintain consistent performance without thermal or power throttling. The CPU's 120 W TDP and the GPU's 575 W TDP, while substantial, do not appear to cause performance degradation in the measured results.