Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
251 FPS
Ultra 1080p Measured
108 FPS

1440p (2K / QHD)

Low 1440p Measured
172 FPS
Ultra 1440p Measured
74 FPS

4K (Ultra HD)

Low 4K Measured
102 FPS
Ultra 4K Measured
44 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 58,386
Graphics Card
Required 28,194
Your GPU 43,223

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 44 58 68 102
1440p QHD 74 98 116 172
1080p Full HD 108 142 168 251

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 251
1920x1080 Medium 168
1920x1080 Ultra 108
2560x1440 High 98
2560x1440 Low 172
2560x1440 Medium 116
2560x1440 Ultra 74
3840x2160 High 58
3840x2160 Low 102
3840x2160 Medium 68
3840x2160 Ultra 44

Performance Analysis: Rust on Your System

The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 4070 SUPER is a high-end desktop combination aimed at delivering strong frame rates in demanding titles. For Rust, the measured data reveals a system that excels at mainstream resolutions but begins to strain at 4K with maximum settings. The benchmark results show a clear progression of performance that scales predictably with resolution and graphical presets, offering a detailed look at where this combo’s strengths and limitations lie.

Measured FPS Breakdown

At 1920x1080, this combination delivers exceptional performance across all tested presets. The data shows an average of 251 FPS at Low settings, which is the highest figure recorded for this combo in any configuration. Moving to Medium settings, the average drops to 168 FPS, with a minimum of 143 FPS and a maximum of 193 FPS. High settings produce an average of 142 FPS, while the most demanding Ultra preset still maintains a robust 108 FPS average. These numbers indicate that at 1080p, the system is far from being constrained, with even the heaviest preset leaving substantial headroom above the 60 FPS playability threshold.

Stepping up to 2560x1440, the performance remains very strong but shows the expected impact of increased pixel count. Low settings yield an average of 172 FPS, and Medium settings maintain an average of 116 FPS, with a minimum of 98 FPS and a maximum of 133 FPS. High settings follow at 98 FPS average, and Ultra settings still provide a playable 74 FPS average. The pattern here is consistent: each preset tier costs roughly 15-20% of the frame rate compared to the step below, but all configurations comfortably exceed the playability threshold.

At 3840x2160, the system’s limits become more apparent. Low settings produce a solid 102 FPS average, and Medium settings deliver 68 FPS average, with a minimum of 58 FPS and a maximum of 79 FPS. High settings drop to a 58 FPS average, which falls just below the 60 FPS playability line. Ultra settings at 4K are the only configuration that is clearly unplayable, with a 44 FPS average. The transition from 1440p to 4K represents a significant load increase, cutting frame rates roughly in half for equivalent settings, highlighting the GPU as the primary bottleneck at this resolution.

Similar Performance Alternatives

Looking at the CPU’s nearest rivals, the Ryzen 7 9850X3D sits in a tightly contested performance bracket. The Intel Xeon Platinum 8260M has an average score of 58323, which is only 0.1% lower than the AMD processor’s score. The Intel Xeon w5-2545 scores 58504, putting it 0.2% higher. The Intel Core i9-14900 trails by 0.5% with a score of 58115, while the AMD Ryzen AI 9 HX 470 leads by 0.7% with a score of 58826. These deltas are remarkably small, indicating that for CPU-bound tasks in Rust, swapping to any of these alternatives would produce nearly identical frame pacing in scenarios where the processor is the limiting factor.

On the GPU side, the RTX 4070 SUPER’s nearest rivals show a similar clustering. The NVIDIA Quadro M6000 24 GB scores 43262, a 0.1% deficit. The NVIDIA GeForce RTX 5050 Mobile matches closely at 43268, also 0.1% behind. The NVIDIA Quadro M6000 scores 43301, representing a 0.2% difference. Finally, the NVIDIA GeForce RTX 4090 Mobile leads by 1% with a score of 43667. For gaming performance in Rust, these GPU alternatives would deliver nearly indistinguishable frame rates, though the desktop RTX 4070 SUPER maintains a slight edge over the mobile and professional parts in raw rasterization workloads.

The combination of these rival scores suggests that the exact hardware configuration is less important than the class of performance it occupies. A system with any of these CPUs paired with any of these GPUs would fall within a narrow band of frame rates, likely differing by no more than a few FPS in any given scenario.

CPU and GPU Roles

The data reveals a shifting balance between CPU and GPU influence across resolutions. At 1920x1080, the CPU’s role is more prominent, as the GPU has ample bandwidth to push high frame rates. The jump from Low to Ultra presets at 1080p shows a reduction from 251 FPS to 108 FPS, a 57% decrease. This large spread suggests that the GPU is handling the increased graphical load, but the CPU is still capable of feeding frames quickly enough to keep the system responsive. The Ryzen 7 9850X3D’s strong single-thread performance, evidenced by its Cinebench R23 single-core score of 2228, supports this interpretation.

At 2560x1440, the balance shifts toward the GPU. The frame rate spread from Low to Ultra narrows, with 172 FPS dropping to 74 FPS, a 57% reduction similar to 1080p. However, the absolute numbers are lower, indicating that the GPU is working harder to fill the additional pixels. The CPU still has headroom, as evidenced by the 116 FPS average at Medium settings, which is well above the playability threshold. The scaling between 1080p and 1440p at the same settings shows a 30-35% frame rate drop, which is more pronounced than the resolution change alone would suggest, pointing to GPU limitations beginning to emerge.

At 3840x2160, the GPU becomes the clear bottleneck. The frame rate spread from Low to Ultra is smaller in relative terms, with 102 FPS dropping to 44 FPS, a 57% reduction. But the absolute values are much lower, and the High preset falls below the 60 FPS threshold. The CPU’s influence is diminished here because the GPU cannot produce frames fast enough to stress the processor. The measured data shows that at 4K, even Medium settings only manage a 68 FPS average, and the minimum of 58 FPS indicates occasional dips below the playability line. This demonstrates that Rust at 4K is primarily a GPU-bound scenario for this combo, with the CPU’s substantial cache and core count providing little benefit once pixel throughput becomes the limiting factor.

FAQ

Q: Can this system run Rust at 60 FPS on a 4K monitor?

A: Yes, but only with specific settings. The data shows playable configurations at Low settings (102 FPS average) and Medium settings (68 FPS average). High settings fall short at 58 FPS average, and Ultra settings are not playable at 44 FPS.

Q: What is the best preset for 1440p gaming?

A: Ultra settings are fully playable at 2560x1440, with an average of 74 FPS. This is the most demanding preset that stays above the 60 FPS threshold, making it the optimal choice for visual quality without sacrificing smoothness.

Q: How much performance is lost when moving from 1080p to 1440p?

A: At Medium settings, the average frame rate drops from 168 FPS at 1920x1080 to 116 FPS at 2560x1440, a reduction of approximately 31%. At Ultra settings, the drop is from 108 FPS to 74 FPS, a reduction of about 31% as well.

Q: Is the CPU or GPU more important for this game at 4K?

A: The GPU is the dominant factor at 3840x2160. The frame rates at 4K are significantly lower than at lower resolutions, and even the High preset cannot maintain 60 FPS, indicating that the graphics card’s rendering capacity is the limiting constraint.

Q: What is the lowest frame rate recorded in any configuration?

A: The lowest average is 44 FPS at 3840x2160 with Ultra settings. The lowest minimum frame rate recorded is 58 FPS, which occurs at 3840x2160 with Medium settings.

Q: Does this combo rank well against other tested configurations?

A: The combo ranks 528th out of 3723 tested combinations, placing it in the top 14% of all systems tested for Rust. This indicates a strong overall performance relative to the broader database.

The Verdict

This PC can run Rust, and it does so exceptionally well at 1920x1080 and 2560x1440. At 1080p, every preset from Low to Ultra clears the 60 FPS threshold, with Ultra averaging 108 FPS. At 1440p, the same is true, with Ultra averaging 74 FPS. The system is fully capable of delivering smooth gameplay at these resolutions with maximum visual fidelity.

At 3840x2160, the verdict is more conditional. The system can run the game, but only at Low and Medium settings, which average 102 FPS and 68 FPS respectively. High settings fall just short of playability at 58 FPS average, and Ultra is not a viable option at 44 FPS. For 4K gaming, players would need to accept Medium settings as the ceiling for a consistently smooth experience, with the caveat that the minimum frame rate of 58 FPS at Medium suggests occasional stutter in demanding scenes. Overall, this combo is a strong performer for Rust, with its primary limitation being the inability to max out settings at 4K.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 68 FPS. This is the recommended setting for 4K, as it provides a comfortable margin above the threshold while still offering improved visuals over Low settings.

At 2560x1440, Ultra settings are the best choice, with an average of 74 FPS. This preset maximizes visual quality while maintaining a playable frame rate, and it is the clear winner for 1440p gaming.

At 1920x1080, Ultra settings again take the top spot, averaging 108 FPS. This provides the best possible visual experience with ample performance headroom, making it the obvious recommendation for 1080p displays.

How This Combo Ranks

The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4070 SUPER combination ranks 528th out of 3723 tested combos in Rust. This places it in the 85th percentile of all systems tested, indicating that it outperforms the vast majority of configurations in the database. The ranking reflects a balanced system where both the CPU and GPU contribute meaningfully to overall performance, though the GPU becomes the limiting factor at 4K. Compared to the nearest rival components, the performance deltas are minimal, meaning that users with similar-tier hardware should expect comparable frame rates. The combination’s strength lies in its ability to deliver high frame rates at 1080p and 1440p with all settings maxed out, making it a top-tier choice for competitive and immersive gameplay in Rust.