Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 32 | 38 | 56 |
| 1440p QHD | 41 | 54 | 64 | 95 |
| 1080p Full HD | 59 | 78 | 92 | 138 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 2060 SUPER is a combination that sits near the lower-middle of the database’s tested configurations for Rust. With a combo rank of 2640 out of 3723 tested combos, this pairing places in roughly the 29th percentile of all recorded CPU and GPU combinations for this game. That ranking reflects a system that can handle the game at 1080p and 1440p with adjusted settings, but it struggles significantly at 4K. The data shows a clear pattern: the RTX 2060 SUPER is the limiting factor at higher resolutions, while the Ryzen 7 9850X3D provides ample headroom for CPU-bound scenarios. For a game like Rust, which is known for heavy server-side and simulation loads, this CPU is far more capable than the GPU can utilize at most settings.
How This Combo Ranks
The recorded data places this combo at rank 2640 out of 3723 total tested combinations. That is a lower-third placement, which means a majority of other CPU and GPU pairings in the database produce higher average frame rates in Rust. The percentile position is not surprising given the GPU’s age and tier; the RTX 2060 SUPER was designed for 1080p and light 1440p gaming, and Rust’s open-world survival mechanics add considerable load that pushes this card to its limits. The Ryzen 7 9850X3D, by contrast, is a top-tier desktop processor with a percentile ranking of 92 among all CPUs, indicating that it outperforms 92% of all processors in the database. The mismatch between the CPU’s high standing and the GPU’s mid-range standing is the defining characteristic of this combo.
In practical terms, this rank means that if you are building or upgrading specifically for Rust, there are many other combinations that will deliver higher frame rates. However, the combo is not unplayable. The measured FPS data shows that at 1080p with Low settings, the system averages 138 FPS, which is well above the 60 FPS playable threshold. At 1440p with Medium settings, it averages 64 FPS, just barely clearing that threshold. The ranking reflects the average across all settings and resolutions, so the lower 4K results drag the overall position down. If you primarily play at 1080p or 1440p, the combo performs better than the raw rank suggests, but the database’s composite scoring weighs all resolution and preset combinations equally.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide a useful frame of reference for what else performs similarly. For the Ryzen 7 9850X3D, the closest matches in the database are the Intel Xeon Platinum 8260M, the Intel Xeon w5-2545, the Intel Core i9-14900, and the AMD Ryzen AI 9 HX 470. The average benchmark scores for these processors are within a narrow band. The Intel Xeon Platinum 8260M scores 58,323, which is 0.1% lower than the Ryzen 7 9850X3D’s 58,386. The Intel Xeon w5-2545 scores 58,504, which is 0.2% higher. The Intel Core i9-14900 scores 58,115, which is 0.5% lower. The AMD Ryzen AI 9 HX 470 scores 58,826, which is 0.7% higher. These differences are negligible in real-world gaming, so any of these CPUs would deliver nearly identical frame rates in Rust when paired with the same GPU.
For the RTX 2060 SUPER, the nearest rivals are the NVIDIA GeForce RTX 3060 Mobile, the AMD Radeon Pro 5700, the AMD Radeon RX 460, and the Intel Arc A770M. The RTX 2060 SUPER has an average benchmark score of 18,093. The RTX 3060 Mobile scores 18,159, which is 0.4% higher. The Radeon Pro 5700 scores 18,189, which is 0.5% higher. The Radeon RX 460 scores 18,373, which is 1.5% higher. The Intel Arc A770M scores 18,383, which is 1.6% higher. Again, these are all within a couple of percentage points, meaning that swapping the RTX 2060 SUPER for any of these GPUs would produce nearly identical performance in Rust. The practical takeaway is that this combo sits in a cluster of hardware with similar capabilities, so there is no dramatic performance variation among these alternatives.
CPU and GPU Roles
The measured FPS data across resolutions and settings reveals a clear division of labor between the CPU and GPU. At 1920x1080, the system achieves 138 FPS on Low, 92 FPS on Medium, 78 FPS on High, and 59 FPS on Ultra. The scaling from Low to Ultra shows a 57% drop in average FPS, which is typical of a GPU-bound scenario where the graphics card is doing most of the work. The CPU, with its 8 cores and 16 threads, has plenty of single-thread performance for Rust’s simulation and networking tasks, so the GPU is the primary constraint at this resolution.
At 2560x1440, the averages drop to 95 FPS on Low, 64 FPS on Medium, 54 FPS on High, and 41 FPS on Ultra. The gap between Low and Ultra widens to 57% again, but the absolute numbers are lower because the GPU is rendering more pixels. The RTX 2060 SUPER’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth become more stressed at this resolution, and the data confirms that only Low and Medium settings stay above the 60 FPS threshold. The CPU still has headroom, as evidenced by the fact that the frame rate drops are consistent with GPU load rather than CPU stalls.
At 3840x2160, the situation becomes more extreme. The system averages 56 FPS on Low, 38 FPS on Medium, 32 FPS on High, and 24 FPS on Ultra. No settings reach the 60 FPS playable threshold. The GPU is clearly overwhelmed, and even Low settings cannot maintain a smooth experience. The CPU’s role is diminished because the GPU is the bottleneck at every preset. The Ryzen 7 9850X3D’s high single-thread and multi-thread scores (2,228 in Cinebench R23 single-core, 22,807 in multi-core) are irrelevant when the GPU cannot render frames fast enough. The data suggests that for this combo, the GPU matters more at every resolution, but the CPU becomes less relevant as resolution increases. If you were to upgrade the GPU, the CPU would not hold it back in Rust, given its 92nd percentile ranking.
FAQ
Q: Can this combo run Rust at 1080p with High settings?
A: Yes. The measured average FPS at 1920x1080 with High settings is 78 FPS, which is above the 60 FPS playable threshold. This is the best playable setting at this resolution, according to the database’s verdict.
Q: What is the best settings preset at 1440p?
A: The database lists Medium as the best playable setting at 2560x1440, with an average FPS of 64. Low settings average 95 FPS, but Medium offers a better visual quality while still staying above 60 FPS.
Q: Is 4K playable with this hardware?
A: No. At 3840x2160, the highest average FPS recorded is 56 FPS on Low settings, which is below the 60 FPS threshold. The database’s verdict for 4K lists no playable settings.
Q: How does this CPU compare to the Intel Core i9-14900?
A: The Ryzen 7 9850X3D has an average benchmark score of 58,386, while the Intel Core i9-14900 scores 58,115. That is a 0.5% difference, meaning the two processors perform nearly identically in synthetic benchmarks and likely in Rust as well.
Q: What GPU is similar to the RTX 2060 SUPER?
A: The NVIDIA GeForce RTX 3060 Mobile is the closest match, with a score of 18,159 versus the RTX 2060 SUPER’s 18,093, a 0.4% difference. The AMD Radeon Pro 5700 and Radeon RX 460 are also within 1.5% of the RTX 2060 SUPER’s score.
Q: Does the CPU or GPU limit performance more in Rust?
A: The data indicates the GPU is the limiting factor at all resolutions. At 1080p, the frame rate drops from 138 FPS on Low to 59 FPS on Ultra, showing GPU scaling. At 4K, even Low settings only reach 56 FPS, confirming the GPU cannot keep up.
Measured FPS Breakdown
The database provides exact measured frame rates for three resolutions and four settings presets. At 1920x1080, the system averages 138 FPS on Low, 92 FPS on Medium, 78 FPS on High, and 59 FPS on Ultra. The Medium preset has recorded minimum and maximum values of 79 FPS and 106 FPS, respectively, indicating some frame time variance but generally smooth performance. The other presets at this resolution only have average FPS recorded, with no min or max values.
At 2560x1440, the averages are 95 FPS on Low, 64 FPS on Medium, 54 FPS on High, and 41 FPS on Ultra. The Medium preset shows a minimum of 54 FPS and a maximum of 73 FPS, which means it can dip below the 60 FPS threshold in demanding scenes, but the average stays above it. The Low preset has no min or max recorded, but its average of 95 FPS suggests it is comfortably playable.
At 3840x2160, the averages are 56 FPS on Low, 38 FPS on Medium, 32 FPS on High, and 24 FPS on Ultra. Only the Medium preset has min and max values recorded, at 32 FPS and 43 FPS, respectively. This shows that even the best-case frame rates at 4K are below the playable threshold. The overall pattern is a linear drop in FPS as resolution and settings increase, with the GPU being the sole determinant of performance.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 78 FPS. Ultra falls to 59 FPS, just below the threshold, so it is not recommended for a consistent experience. Medium and Low are also playable, but High provides the best visual quality while maintaining a healthy margin above 60 FPS.
For 2560x1440, the best playable setting is Medium, with an average of 64 FPS. Low averages 95 FPS and is also playable, but Medium offers better graphics while still clearing the 60 FPS line. High drops to 54 FPS, and Ultra to 41 FPS, so those are not viable for smooth gameplay.
For 3840x2160, there is no playable setting. The highest average is 56 FPS on Low, which falls short of the 60 FPS threshold. Even with the lowest settings, the RTX 2060 SUPER cannot deliver a smooth experience at 4K in Rust. The database’s verdict confirms this, listing no playable settings for this resolution. If you want to play at 4K, you would need a more powerful GPU, as this combo is firmly limited to 1080p and 1440p gaming.