Rust

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 5090 D is an exceptionally high-end combination, and the benchmark data for Rust reflects that. This analysis breaks down the measured performance across resolutions and settings, compares the hardware to its nearest rivals, and provides a clear verdict on what this system can deliver.

Measured FPS Breakdown

At 3840x2160 (4K), the RTX 5090 D still delivers a highly playable experience, though it’s the most demanding resolution tested. On Low settings, the average frame rate is 141 FPS, which is already far beyond the 60 FPS playable threshold. Moving to Medium brings the average down to 95 FPS, with a minimum of 81 FPS and a maximum of 109 FPS, showing that even the dips stay comfortably above 60. High settings produce an average of 80 FPS, still very smooth. The most demanding preset, Ultra, yields an average of 61 FPS, which just clears the playable threshold. The data shows a clear scaling curve: from Low to Ultra at 4K, the average drops by 80 FPS, indicating that the GPU is handling a significant load increase but remains capable at every step.

Stepping down to 2560x1440 (1440p) reveals a substantial performance jump. On Low settings, the average reaches 239 FPS, making the game feel extremely fluid. Medium lowers this to 161 FPS, with a minimum of 136 FPS and a maximum of 185 FPS, ensuring no noticeable stutter. High settings produce 136 FPS average, which is still more than double the 60 FPS requirement. Even Ultra at 1440p maintains a 103 FPS average, proving that this combination has massive headroom at this resolution. The difference between Low and Ultra at 1440p is 136 FPS, a smaller absolute gap than at 4K but a larger relative improvement, suggesting the CPU is less of a bottleneck here.

At 1920x1080 (1080p), the performance is staggering. Low settings produce an average of 276 FPS, which is near the limit of what many high-refresh-rate monitors can display. Medium yields 233 FPS, with a minimum of 198 FPS and a maximum of 268 FPS, so the frame pacing remains excellent. High settings drop to 197 FPS average, and Ultra still delivers 150 FPS. The scaling from Low to Ultra at 1080p is a 126 FPS drop, which is less severe proportionally than at higher resolutions, indicating that at 1080p, the CPU is more likely to be the limiting factor than the GPU. All presets at all three resolutions clear the 60 FPS threshold, with the lowest recorded average being 61 FPS at 4K Ultra.

Similar Performance Alternatives

The CPU benchmarks place the AMD Ryzen 7 9700F in the 94th percentile among all CPUs, with an average benchmark score of 69996. Its nearest rivals are remarkably close in performance. The AMD Ryzen 9 7940HX has an average score of 69875, which is a 0.2% difference from the 9700F, making them effectively identical in compute-heavy tasks. The Intel Core i7-14700KF scores 70163, a -0.2% delta, again showing near-parity. The AMD Ryzen 9 7950X scores 69515, a 0.7% delta, and the Intel Core i7-14700K scores 69355, a 0.9% delta. For Rust, where single-thread performance often matters, these four rivals would deliver indistinguishable frame rates in CPU-bound scenarios. The 9700F’s 8 cores and 16 threads, with a boost clock of 5.50 GHz, ensure it sits at the top of this peer group.

On the GPU side, the NVIDIA GeForce RTX 5090 D sits in the 92nd percentile of all GPUs, with an average benchmark score of 77712. Its nearest rivals are not desktop enthusiast cards but rather high-end mobile and datacenter parts. The AMD Radeon RX 6650M XT scores 76904, a 1.1% difference, meaning it is slightly slower. The AMD Radeon RX 6850M XT scores 78940, which is -1.6% faster than the 5090 D in this metric. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB versions score 79396 and 79605, respectively, with -2.1% and -2.4% deltas, indicating they are slightly faster in synthetic tests. However, these Tesla parts are not gaming cards; they lack the driver optimization and features for Rust. In practical gaming terms, the RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are unmatched by these rivals, so for Rust specifically, the 5090 D will outperform them despite the benchmark deltas.

CPU and GPU Roles

The benchmark data reveals a clear shift in which component dominates performance based on resolution. At 3840x2160, the GPU is the primary driver. The average FPS drops from 141 on Low to 61 on Ultra, a 57% reduction, which indicates that the graphical workload is scaling heavily with settings. The RTX 5090 D’s compute power, measured at 104.8 TFLOPS FP32, is being fully utilized. The CPU’s role is less critical here, as even the 4K Ultra preset stays above 60 FPS, suggesting the Ryzen 7 9700F has enough headroom to feed the GPU without becoming a bottleneck.

At 2560x1440, the balance shifts slightly. The average FPS on Low is 239, but on Ultra it’s 103. This 57% drop is similar to 4K, but the absolute values are much higher. The fact that 1440p Ultra hits 103 FPS while 4K Ultra hits 61 FPS shows that pixel count is the main differentiator. The CPU is still not the limiting factor here, as the 9700F’s strong single-thread score of 4691 in Passmark helps maintain high frame rates even when the GPU is not maxed out.

At 1920x1080, the CPU begins to matter more. The difference between Low (276 FPS) and Ultra (150 FPS) is 46%, which is smaller than at higher resolutions. This suggests that at 1080p, the GPU has spare capacity, and the CPU’s ability to process game logic and draw calls becomes more relevant. The Ryzen 7 9700F’s 8 cores and 16 threads, with a 65W TDP, are sufficient to keep frame rates high, but the data implies that a weaker CPU would start to cap performance around 150-200 FPS at this resolution. For users targeting 1080p at high refresh rates, the CPU matters more than at 4K, but the 9700F is still more than adequate.

The Verdict

This PC can absolutely run Rust, and it does so with exceptional headroom. The verdict by resolution is clear: at 3840x2160, all four presets (Low, Medium, High, Ultra) are playable, with Ultra achieving an average of 61 FPS, just above the 60 FPS threshold. At 2560x1440, every preset clears 100 FPS, with Ultra at 103 FPS and Low at 239 FPS, making this the sweet spot for high-refresh-rate gaming. At 1920x1080, the system is almost overkill, with Ultra delivering 150 FPS and Low hitting 276 FPS. The data indicates that a gamer could realistically run Rust at 4K Ultra and still enjoy a smooth experience, though the 61 FPS average leaves little room for heavy scenes. For competitive play or high-refresh monitors, 1440p or 1080p with High or Ultra settings is ideal. The core takeaway is that this combination never dips below 60 FPS in any tested configuration, making it a top-tier choice for Rust.

FAQ

Q: What is the best setting for 4K gaming with this combo?

A: At 3840x2160, Ultra settings deliver an average of 61 FPS, which is playable. If you want more headroom, High settings provide 80 FPS average, and Medium offers 95 FPS with a minimum of 81 FPS.

Q: Can this system handle 1440p at high refresh rates?

A: Yes. At 2560x1440, Ultra settings average 103 FPS, High settings average 136 FPS, and Low settings reach 239 FPS. All presets are well above 60 FPS, so it supports 144Hz monitors with ease.

Q: How does the RTX 5090 D compare to its nearest GPU rivals?

A: The RTX 5090 D scores 77712 on average, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) but 1.6% lower than the AMD Radeon RX 6850M XT (78940). The Tesla P100 parts are 2.1-2.4% faster in synthetic benchmarks, but they are not gaming cards.

Q: Is the Ryzen 7 9700F a bottleneck for the RTX 5090 D?

A: The data shows no significant bottleneck. At 1080p Low, the system hits 276 FPS, which is likely CPU-limited, but the 9700F’s single-thread score of 4691 keeps it competitive. At 4K, the GPU is the limiting factor, and the CPU still provides enough performance to reach 61 FPS on Ultra.

Q: What is the minimum FPS recorded in the tests?

A: The only preset with a reported minimum is Medium at 3840x2160, which has a minimum of 81 FPS. At 2560x1440 Medium, the minimum is 136 FPS, and at 1920x1080 Medium, it’s 198 FPS.

Q: How does this combo rank overall in Rust?

A: This specific combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5090 D ranks 10th out of 3723 tested combos for Rust, placing it in the top 0.3% of all systems.

How This Combo Ranks

In the Rust benchmark database, this combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 5090 D achieves a rank of 10 out of 3723 tested combinations. This places it in the top percentile of all systems tested, which is consistent with the measured FPS data. The 9700F’s 94th percentile CPU score and the RTX 5090 D’s 92nd percentile GPU score combine to create a system that is near the top of the leaderboard. The only systems that rank higher are likely those with even more specialized hardware or slightly better-tuned configurations. For Rust, this rank confirms that the system is not just playable but exceptional. The 4K Ultra result of 61 FPS is a key factor; many other combos would fail to hit 60 FPS at that preset. The 1080p Low result of 276 FPS shows that the CPU is also strong enough to avoid limiting the GPU in less demanding scenarios. Overall, this combo is a top-tier choice for Rust, offering high frame rates at all resolutions and settings, with the only caveat being that 4K Ultra is a close call at 61 FPS.