Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Try lowering shadows and anti-aliasing for better FPS.
A better graphics card would significantly improve performance.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 34 | 45 | 53 | 79 |
| 1440p QHD | 58 | 76 | 90 | 134 |
| 1080p Full HD | 84 | 110 | 130 | 194 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3070 Ti combination delivers a wide range of performance in Rust, scaling predictably with resolution and preset. At 1080p, the system is overwhelmingly capable, while 4K demands significant settings compromises to maintain playable frame rates. The measured data shows a clear hierarchy: the combo ranks 1324th out of 3723 tested configurations in this game, placing it in the upper third of all systems. With a playable threshold of 60 FPS, the results indicate that this hardware pairing is a solid choice for most gaming scenarios, though its limits become apparent at higher resolutions.
Measured FPS Breakdown
At 1920x1080, the RTX 3070 Ti paired with the Ryzen 7 9700F produces its strongest results. On Low settings, the average frame rate reaches 194 FPS, which is more than three times the playable threshold. Medium settings see the average drop to 130 FPS, with a minimum of 111 FPS and a maximum of 150 FPS, providing a very consistent experience. High settings yield 110 FPS on average, still comfortably above 60 FPS. Even the most demanding Ultra preset maintains an average of 84 FPS, meaning every preset at this resolution clears the playability bar with substantial headroom. The gap between Low and Ultra is 110 FPS, illustrating how much performance headroom exists at 1080p.
Moving to 2560x1440, the performance curve becomes steeper. Low settings produce an average of 134 FPS, which remains highly fluid. Medium settings average 90 FPS, with a minimum of 76 FPS and a maximum of 103 FPS, showing strong 1% low behavior. High settings average 76 FPS, which is still above the 60 FPS threshold but begins to show the GPU working harder. Ultra settings fall to an average of 58 FPS, dipping just below the playable threshold. The delta between Low and Ultra here is 76 FPS, a larger relative drop than at 1080p, indicating that the GPU becomes a more significant factor as pixel count increases.
At 3840x2160, the limits of this combination are exposed. Low settings average 79 FPS, which is the only preset at this resolution that comfortably exceeds 60 FPS. Medium settings average 53 FPS, with a minimum of 45 FPS and a maximum of 61 FPS, meaning the experience will frequently drop below the playable threshold. High settings average 45 FPS, and Ultra settings average 34 FPS, both of which are far from smooth gameplay. The data shows a 45 FPS difference between Low and Ultra at 4K, a stark contrast to the 110 FPS gap at 1080p. This compression of performance at higher resolutions indicates that the RTX 3070 Ti’s 8 GB GDDR6X memory and 608.3 GB/s bandwidth are being saturated, limiting overall throughput.
FAQ
Q: What is the highest preset that maintains an average above 60 FPS at 1080p?
A: Ultra settings average 84 FPS at 1920x1080, making it the most demanding preset that clears the playable threshold at this resolution.
Q: Is the RTX 3070 Ti capable of running Rust at 4K with playable frame rates?
A: Only at Low settings, which average 79 FPS. Medium settings fall to 53 FPS, High to 45 FPS, and Ultra to 34 FPS, all below the 60 FPS playable threshold.
Q: How much performance is lost when moving from 1080p to 1440p on High settings?
A: The average FPS drops from 110 at 1920x1080 to 76 at 2560x1440, a reduction of 34 FPS, or roughly 31% lower performance.
Q: What is the minimum FPS recorded for any preset across all resolutions?
A: The lowest recorded minimum is 45 FPS, observed at 3840x2160 on Medium settings. This represents the worst-case scenario in the measured data.
Q: Does the combo rank highly among all tested systems for Rust?
A: It ranks 1324th out of 3723 tested combos, placing it in the top 35.5% of all configurations tested for this game.
Q: At which resolution does the Ultra preset become unplayable?
A: At 2560x1440, Ultra averages 58 FPS, which is below the 60 FPS threshold. At 3840x2160, Ultra averages 34 FPS, making it entirely unsuitable for smooth gameplay.
How This Combo Ranks
The combination of the Ryzen 7 9700F and RTX 3070 Ti holds the 1324th position out of 3723 tested systems for Rust. This places it in the 64.4th percentile of all configurations, meaning roughly 64% of tested combos perform worse. The ranking reflects a well-balanced pairing that excels at lower resolutions but struggles to maintain high frame rates at 4K. In the context of Rust’s demanding rendering engine, which often stresses both CPU and GPU, this mid-tier ranking is expected. The CPU’s strong single-thread score of 4691 in Passmark and the GPU’s Passmark G3D score of 23356 suggest that neither component is a bottleneck at 1080p, but the GPU becomes the limiting factor at higher resolutions. The 8-core, 16-thread Ryzen 7 9700F with a boost clock of 5.50 GHz provides ample processing power for Rust’s physics and entity updates, while the RTX 3070 Ti’s 21.75 TFLOPS of FP32 performance handles pixel shading effectively. The ranking indicates that most higher-performing systems likely feature newer GPUs with more memory bandwidth or greater rasterization throughput.
Similar Performance Alternatives
The CPU’s nearest rivals, as measured by average benchmark score, include the AMD Ryzen 9 7940HX, which scores 69875, a delta of 0.2% higher than the Ryzen 7 9700F’s 69996. The Intel Core i7-14700KF scores 70163, which is 0.2% higher, while the AMD Ryzen 9 7950X scores 69515, 0.7% lower, and the Intel Core i7-14700K scores 69355, 0.9% lower. These small deltas mean that swapping the Ryzen 7 9700F for any of these CPUs would produce nearly identical frame rates in Rust, with differences of less than 1% in synthetic benchmarks. The Ryzen 9 7940HX and Core i7-14700KF are essentially performance twins, while the Ryzen 9 7950X and Core i7-14700K are marginally slower in aggregate but would not yield a perceptible difference in real gaming.
On the GPU side, the RTX 3070 Ti’s nearest rivals include the NVIDIA GeForce RTX 5070 Mobile, which scores 29928, a 0.1% delta, and the AMD Radeon RX 6800, which scores 30095, 0.5% higher. The NVIDIA GeForce RTX 2080 Ti scores 29783, 0.5% lower, and the AMD Radeon RX 6700 scores 30433, 1.6% higher. In practical terms, these GPUs would deliver nearly identical frame rates in Rust at the same settings and resolutions. The RX 6800 and RX 6700 might offer slightly better performance in certain scenes due to their higher memory bandwidth or cache architecture, but the differences would be within the margin of measurement error. For users considering alternative hardware, any of these CPUs or GPUs would result in a similar gameplay experience, with the RTX 5070 Mobile being the closest match.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 84 FPS. This provides the best visual quality while maintaining fluid gameplay. The minimum FPS was not recorded for Ultra at this resolution, but the average suggests consistent performance above the threshold.
At 2560x1440, the best playable preset is High, averaging 76 FPS. Medium settings average 90 FPS, but High offers better visuals with a still-safe margin above 60 FPS. Ultra falls short at 58 FPS, so it is not recommended for a consistent experience.
At 3840x2160, only Low settings achieve an average above 60 FPS, hitting 79 FPS. Medium falls to 53 FPS, so Low is the only viable option for smooth gameplay at this resolution. High and Ultra are far too demanding, with averages of 45 FPS and 34 FPS respectively.
The Verdict
This system can run Rust, but the playable experience depends heavily on the chosen resolution. At 1920x1080, the verdict is unequivocal: all four presets, from Low to Ultra, clear the 60 FPS threshold. The Ultra preset averages 84 FPS, making it the recommended choice for users who prioritize visual fidelity. At 2560x1440, the system remains playable on High, Medium, and Low settings, with High averaging 76 FPS. Ultra is not playable, averaging 58 FPS. At 3840x2160, the system is only playable on Low settings, which average 79 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 53, 45, and 34 FPS respectively. The data indicates that the RTX 3070 Ti is the primary constraint at higher resolutions, as the Ryzen 7 9700F provides ample CPU headroom across all tested scenarios. For 1080p and 1440p gaming, this combo is more than sufficient, but 4K users must accept significant visual compromises to maintain playable frame rates.
CPU and GPU Roles
The scaling between resolutions reveals how the CPU and GPU divide responsibilities in Rust. At 1920x1080, the CPU’s influence is more pronounced, as the RTX 3070 Ti is not fully saturated. The difference between Low and Ultra is 110 FPS, reflecting the GPU’s ability to handle even the heaviest presets without becoming a bottleneck. The Ryzen 7 9700F’s single-thread score of 4691 and multithread score of 36470 ensure that Rust’s simulation and networking code runs efficiently, keeping frame times stable.
At 2560x1440, the GPU begins to dominate. The performance gap between Low and Ultra narrows to 76 FPS, and Ultra drops below 60 FPS. This indicates that the RTX 3070 Ti’s pixel rendering capabilities are being pushed harder, while the CPU still has headroom. The minimum FPS at Medium settings is 76 FPS, closely matching the High average, which suggests that frame pacing is consistent and the CPU is not causing stutters.
At 3840x2160, the GPU is the clear limiting factor. The performance delta between Low and Ultra compresses to 45 FPS, and even Medium settings dip to a 45 FPS minimum. This is a classic sign of GPU-bound rendering, where the 8 GB VRAM capacity and 608.3 GB/s bandwidth are insufficient to maintain high frame rates. The CPU’s role diminishes, as the processing load shifts almost entirely to the GPU’s rasterization and memory subsystems. Across all resolutions, the Ryzen 7 9700F’s 32 MB of shared L3 cache and 89.6 GB/s memory bandwidth provide sufficient data throughput for Rust’s world streaming, but the GPU’s 256-bit memory bus and GDDR6X memory are the deciding factors at 1440p and above. The data suggests that for users targeting 4K, a GPU with greater memory capacity and bandwidth would be the primary upgrade path, while the CPU remains a capable partner for this game.