Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
113 FPS
Ultra 1080p Measured
49 FPS

1440p (2K / QHD)

Low 1440p Measured
78 FPS
Ultra 1440p Measured
33 FPS

4K (Ultra HD)

Low 4K Measured
46 FPS
Ultra 4K Measured
20 FPS
15.6ms Frame Time
23ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 69,996
Graphics Card
Required 28,194
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 26 31 46
1440p QHD 33 44 52 78
1080p Full HD 49 64 76 113

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 113
1920x1080 Medium 76
1920x1080 Ultra 49
2560x1440 High 44
2560x1440 Low 78
2560x1440 Medium 52
2560x1440 Ultra 33
3840x2160 High 26
3840x2160 Low 46
3840x2160 Medium 31
3840x2160 Ultra 20

Performance Analysis: Rust on Your System

Measured FPS Breakdown

The recorded data for Rust with the AMD Ryzen 7 9700F and NVIDIA GeForce GTX 1070 shows a wide performance spread across resolutions and presets. At 1920x1080, the combination delivers its strongest results, with Low settings producing an average of 113 FPS, Medium averaging 76 FPS, and High averaging 64 FPS. The Medium preset at this resolution also recorded a minimum of 64 FPS and a maximum of 87 FPS, indicating that frame times stay relatively consistent even during demanding scenes. Ultra settings at 1080p drop to 49 FPS average, which falls below the 60 FPS playability threshold.

Moving to 2560x1440, the performance gap becomes more pronounced. Low settings average 78 FPS, while Medium drops to 52 FPS with a recorded range of 44 to 60 FPS. High settings average 44 FPS, and Ultra falls further to 33 FPS. The data shows that at 1440p, only the Low preset clears the 60 FPS line, and even then with a modest margin of 18 FPS above the threshold.

At 3840x2160, the combination struggles significantly. Low settings average 46 FPS, Medium averages 31 FPS with a range of 26 to 35 FPS, High averages 26 FPS, and Ultra averages just 20 FPS. None of these presets reach the 60 FPS playable mark at 4K, with the closest being Low at 46 FPS, a 14 FPS shortfall. The frame rate scaling across resolutions follows a predictable pattern: each step down in resolution yields substantial gains, while each step up in settings imposes a heavy cost on the aging GTX 1070.

Best Settings per Resolution

For each resolution, the most demanding preset that stays at or above 60 FPS average is as follows. At 1920x1080, the High preset is the optimal choice, delivering an average of 64 FPS. This is the highest visual quality option that remains playable, with Medium at 76 FPS and Low at 113 FPS offering higher frame rates but reduced fidelity. The data suggests that High at 1080p provides the best balance of visual quality and performance for this combination.

At 2560x1440, the Low preset is the only option that clears the 60 FPS threshold, averaging 78 FPS. Medium falls short at 52 FPS, High at 44 FPS, and Ultra at 33 FPS. This means users at 1440p must accept the lowest settings to maintain smooth gameplay. The 26 FPS gap between Low and Medium at this resolution highlights the significant performance cost of raising quality settings on this GPU.

At 3840x2160, no preset achieves 60 FPS. The closest is Low at 46 FPS, which is 14 FPS below the playable threshold. Consequently, the database records no playable settings at 4K for this hardware combination. Users targeting 4K would need to consider frame rate limiting or accept sub-60 FPS performance, as even the least demanding preset cannot reach the target.

How This Combo Ranks

The AMD Ryzen 7 9700F and NVIDIA GeForce GTX 1070 combination ranks 3082 out of 3723 tested configurations in Rust. This places it in the lower portion of the database, roughly in the 17th percentile of all tested combos. The ranking reflects the significant bottleneck imposed by the GTX 1070, which was released in 2016 and is now end-of-life, relative to the much newer Ryzen 7 9700F processor.

The CPU itself is a strong performer, with an average benchmark score of 69996 and a percentile rank of 94 among all CPUs. Its nearest rivals include the AMD Ryzen 9 7940HX with an average score of 69875 (0.2% lower), the Intel Core i7-14700KF at 70163 (0.2% higher), the AMD Ryzen 9 7950X at 69515 (0.7% lower), and the Intel Core i7-14700K at 69355 (0.9% lower). These scores indicate the 9700F sits in a competitive band with these high-end processors.

The GPU, however, ranks much lower, with a percentile of 47 among all GPUs and an average benchmark score of 9780. Its nearest rivals include the AMD FirePro W5000 at 9803 (0.2% higher), the NVIDIA Quadro M2000M at 9832 (0.5% higher), the NVIDIA Tesla M10 at 9724 (0.6% lower), and the NVIDIA Tesla C2070 at 9716 (0.7% lower). The mismatch between the CPU's high percentile and the GPU's mid-range percentile explains why the overall combo rank is low: the GTX 1070 cannot fully utilize the processing power available from the Ryzen 7 9700F in Rust.

Similar Performance Alternatives

For users considering nearby hardware options, the CPU and GPU nearest rivals provide useful reference points. The AMD Ryzen 9 7940HX performs within 0.2% of the 9700F in average benchmark score, making it effectively equivalent for CPU-bound tasks. The Intel Core i7-14700KF is 0.2% faster, while the AMD Ryzen 9 7950X is 0.7% slower and the Intel Core i7-14700K is 0.9% slower. In practice, swapping the 9700F for any of these processors would yield nearly identical frame rates in Rust, as the GPU remains the limiting factor.

On the GPU side, the AMD FirePro W5000 scores 0.2% higher than the GTX 1070, while the NVIDIA Quadro M2000M scores 0.5% higher. The NVIDIA Tesla M10 scores 0.6% lower, and the NVIDIA Tesla C2070 scores 0.7% lower. These deltas are all within 1% of the GTX 1070's average benchmark score, meaning any of these GPUs would produce very similar performance in Rust. However, it is important to note that several of these alternatives are workstation or professional cards, which may have different driver optimizations and feature sets compared to the consumer-focused GTX 1070.

The data indicates that users with a Ryzen 7 9700F looking for a GPU upgrade would see meaningful gains, as the CPU's high benchmark scores suggest it has substantial headroom. Conversely, users with a GTX 1070 considering a CPU upgrade would see minimal improvement in Rust, since the GPU is already the bottleneck at most resolutions and settings.

FAQ

Q: What is the highest playable preset at 1920x1080?

A: The High preset is the most demanding option that stays at or above 60 FPS, averaging 64 FPS. Medium averages 76 FPS and Low averages 113 FPS, but High offers the best visual quality among playable options.

Q: Can this combination run Rust at 2560x1440 with playable frame rates?

A: Yes, but only on Low settings, which average 78 FPS. Medium drops to 52 FPS, High to 44 FPS, and Ultra to 33 FPS, all below the 60 FPS threshold.

Q: Are there any playable settings at 3840x2160?

A: No. The best result is Low settings at 46 FPS, which is 14 FPS below the 60 FPS playable threshold. Medium averages 31 FPS, High 26 FPS, and Ultra 20 FPS.

Q: How does the Ryzen 7 9700F compare to its nearest rivals?

A: The 9700F has an average benchmark score of 69996. The Intel Core i7-14700KF scores 70163 (0.2% higher), the AMD Ryzen 9 7940HX scores 69875 (0.2% lower), the AMD Ryzen 9 7950X scores 69515 (0.7% lower), and the Intel Core i7-14700K scores 69355 (0.9% lower).

Q: How does the GTX 1070 compare to its nearest rivals?

A: The GTX 1070 has an average benchmark score of 9780. The NVIDIA Quadro M2000M scores 9832 (0.5% higher), the AMD FirePro W5000 scores 9803 (0.2% higher), the NVIDIA Tesla M10 scores 9724 (0.6% lower), and the NVIDIA Tesla C2070 scores 9716 (0.7% lower).

Q: What is the overall ranking of this combination in Rust?

A: The combo ranks 3082 out of 3723 tested configurations, placing it in the lower portion of the database. This reflects the GTX 1070's mid-range GPU percentile of 47, which limits the high-performing CPU.

The Verdict

Can this PC run Rust? The answer depends entirely on the target resolution. At 1920x1080, the AMD Ryzen 7 9700F and NVIDIA GeForce GTX 1070 combination is playable on High, Medium, and Low presets, with High averaging 64 FPS, Medium 76 FPS, and Low 113 FPS. The High preset at 1080p is the recommended choice, as it provides the best visual quality while maintaining a 4 FPS margin above the 60 FPS threshold.

At 2560x1440, the system can run Rust only on Low settings, which average 78 FPS. This provides an 18 FPS margin above the playable threshold, but users must accept the lowest visual fidelity. Medium, High, and Ultra all fall below 60 FPS, with averages of 52, 44, and 33 FPS respectively.

At 3840x2160, the system cannot achieve playable frame rates on any preset. The best result is Low at 46 FPS, which is 14 FPS short of the target. Medium, High, and Ultra all produce averages below 35 FPS, making 4K gameplay impractical with this hardware.

The data clearly shows that the GTX 1070 is the limiting component. The Ryzen 7 9700F ranks in the 94th percentile among CPUs, while the GTX 1070 sits at the 47th percentile among GPUs. This imbalance means the CPU has significant headroom that the GPU cannot utilize in Rust. Users seeking higher frame rates at 1440p or any playable performance at 4K would need to upgrade the graphics card, while the processor can remain in place for future GPU upgrades without becoming a bottleneck.