Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 80 | 95 | 141 |
| 1440p QHD | 103 | 136 | 161 | 195 |
| 1080p Full HD | 150 | 178 | 189 | 220 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5090 D pairing is a formidable combination for Rust, a survival title that stresses both CPU and GPU. The processor, a Zen 4 Raphael chip with 8 cores and 16 threads, carries a launch MSRP of $449, while the graphics card, a Blackwell 2.0 GB202 with 32 GB of GDDR7 memory, has a launch MSRP of 2,299 USD. Measured frame rates show this system clears the 60 FPS playability threshold at every tested resolution and preset, with Ultra settings averaging 61 FPS at 4K, 103 FPS at 1440p, and 150 FPS at 1080p.
Similar Performance Alternatives
The CPU's nearest rivals, based on average benchmark scores, are the AMD Ryzen 7 8700G, Intel Core i7-13650HX, and AMD Ryzen 7 7745HX, all scoring 33,089 points against the 7800X3D's 33,079, a delta of 0%. The AMD Ryzen 9 PRO 6950H scores 33,201, a -0.4% difference. These processors deliver essentially identical synthetic performance, so in Rust they would produce nearly indistinguishable frame rates. The 7800X3D's 96 MB of L3 cache and 8-core/16-thread configuration are its key differentiators, but the rival chips are close enough that any of them would keep the same gameplay experience. On the GPU side, the closest competitor is the AMD Radeon RX 6650M XT with an average score of 76,904, which is 1.1% higher than the RTX 5090 D's 77,712. The AMD Radeon RX 6850M XT (78,940) trails by -1.6%, while the NVIDIA Tesla P100 PCIe 12 GB (79,396) and 16 GB (79,605) are -2.1% and -2.4% lower, respectively. All of these GPUs fall within a 2.5% band of the 5090 D, meaning any of them would yield similar frame rates in Rust, though the 5090 D's lead over the Tesla parts is marginal. For a player choosing between these alternatives, the performance difference in Rust would be negligible—well within the noise of typical benchmark runs.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 61 FPS. That is a razor-thin margin—just one frame above the playability threshold—so while Ultra is technically playable, there is no headroom for dips. The next step down, High, averages 80 FPS, providing a more comfortable buffer, but the data confirms that Ultra itself clears the line. At 2560x1440, Ultra averages 103 FPS, a comfortable 43 FPS above the threshold. This resolution offers the best balance of visual fidelity and performance, with enough headroom to absorb scene complexity. At 1920x1080, Ultra averages 150 FPS, more than double the 60 FPS target, making it the ideal resolution for high-refresh-rate displays. In all three resolutions, every preset (Low, Medium, High, Ultra) exceeds 60 FPS, but Ultra is the highest setting that maintains playability. The verdict data explicitly lists Ultra as the best settings for each resolution, with average FPS of 61, 103, and 150 respectively.
CPU and GPU Roles
The measured FPS scaling across resolutions and presets reveals how the workload shifts between CPU and GPU. At 1080p, the difference between Low and Ultra is 220 to 150 FPS, a 31.8% drop. At 1440p, that spread widens: Low 195 FPS to Ultra 103 FPS, a 47.2% reduction. At 4K, Low 141 FPS to Ultra 61 FPS, a 56.7% drop. This increasing sensitivity to settings at higher resolutions indicates that the GPU becomes the dominant constraint as pixel count rises. Conversely, at 1080p the CPU's strong per-core performance—evidenced by a 3DMark single-thread score of 959 and a Cinebench R23 single-core score of 1,713—allows the system to push very high frame rates, but the GPU still has headroom. The transition from 1080p to 1440p at Low settings costs only 25 FPS (220 to 195, an 11.4% drop), while at Ultra it costs 47 FPS (150 to 103, a 31.3% drop). This suggests that at lower presets, the CPU is more likely to be the limiting factor, while at higher presets the GPU takes over. At 4K, the GPU's 1.79 TB/s memory bandwidth and 104.8 TFLOPS FP32 throughput are clearly taxed, as even Low settings yield only 141 FPS. The CPU's 8-core/16-thread design and 96 MB L3 cache are sufficient to keep up at all resolutions, but the data indicates that the RTX 5090 D is the primary driver of frame rate differences between presets, especially at 4K.
The Verdict
This PC can absolutely run Rust. The verdict data lists all three resolutions as playable at every preset, with the best settings being Ultra in each case. At 4K, Ultra averages 61 FPS, just above the 60 FPS threshold. At 1440p, Ultra averages 103 FPS, and at 1080p, Ultra averages 150 FPS. There is no resolution or preset where the system falls below 60 FPS. For players who prefer maximum visual fidelity, the RTX 5090 D and 7800X3D deliver a playable experience even at 4K Ultra, though the tight 61 FPS average leaves little room for demanding scenes. At 1440p and 1080p, the system has substantial headroom, making it suitable for high-refresh-rate monitors without compromising on settings.
Measured FPS Breakdown
The following table lists all recorded frame rates. Note that minimum and maximum values were only captured for the Medium preset; other presets report only the average.
| Resolution | Settings | Avg FPS | Min FPS | Max FPS |
|------------|----------|---------|---------|---------|
| 3840x2160 | High | 80 | — | — |
| 3840x2160 | Low | 141 | — | — |
| 3840x2160 | Medium | 95 | 81 | 109 |
| 3840x2160 | Ultra | 61 | — | — |
| 2560x1440 | High | 136 | — | — |
| 2560x1440 | Low | 195 | — | — |
| 2560x1440 | Medium | 161 | 136 | 185 |
| 2560x1440 | Ultra | 103 | — | — |
| 1920x1080 | High | 178 | — | — |
| 1920x1080 | Low | 220 | — | — |
| 1920x1080 | Medium | 189 | 161 | 218 |
| 1920x1080 | Ultra | 150 | — | — |
The Medium preset at 4K shows a minimum of 81 FPS and a maximum of 109 FPS, indicating a 28 FPS swing. At 1440p Medium, the range is 136 to 185 FPS, a 49 FPS spread. At 1080p Medium, the range is 161 to 218 FPS, a 57 FPS variance. These figures demonstrate that Rust's frame pacing can vary significantly, but the averages remain well above 60 FPS. The absence of min/max data for other presets means we cannot assess their variability, but the average values alone show a consistent ability to maintain playable performance.
How This Combo Ranks
In the database of tested combinations for Rust, this specific pairing ranks 86th out of 3,723 combinations. That places it among the top 86 systems, which is a strong showing given the sheer number of possible CPU/GPU pairings. The CPU itself sits in the 83rd percentile of all CPUs by average benchmark score, and the GPU is in the 92nd percentile of all GPUs. The fact that the combo ranks higher than the CPU's percentile suggests that the 7800X3D's 96 MB of L3 cache and 8-core/16-thread configuration are particularly effective for Rust's workload, or that the RTX 5090 D's 32 GB of GDDR7 memory provides an advantage in this title. Regardless, the rank confirms that this is a top-tier setup for Rust, outperforming the vast majority of tested combinations. The nearest rivals on the CPU side are within 0.4% of the 7800X3D's average score, and on the GPU side within 2.4%, so any of those alternatives would likely land in a similar rank, but the exact combination of this CPU and GPU has been verified to deliver the measured performance.