Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

91%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
176 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
119 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
69 FPS
Ultra 4K Measured
32 FPS
9.9ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 40,081
Graphics Card
Required 28,194
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 39 46 69
1440p QHD 51 69 79 119
1080p Full HD 73 101 118 176

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 101
1920x1080 Low 176
1920x1080 Medium 118
1920x1080 Ultra 73
2560x1440 High 69
2560x1440 Low 119
2560x1440 Medium 79
2560x1440 Ultra 51
3840x2160 High 39
3840x2160 Low 69
3840x2160 Medium 46
3840x2160 Ultra 32

Performance Analysis: Rust on Your System

The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 5060 pairing is a mid-range desktop combination built around AMD's Zen 4 architecture and NVIDIA's Blackwell 2.0 GPU. The CPU carries a launch MSRP of $329, while the GPU's launch MSRP is 299 USD. In Rust, this system delivers playable frame rates at 1080p across all presets, at 1440p up to High, and at 4K only on Low. The measured data shows a clear GPU-bound workload as resolution and settings scale, with the CPU providing ample headroom throughout.

Similar Performance Alternatives

The Ryzen 7 7700's average benchmark score of 40081 places it within a tight cluster of rivals. The AMD Ryzen AI 9 365 scores 40048, a delta of 0.1% higher, while the Intel Core 5 221E scores 40144 (0.2% lower), the AMD Ryzen 9 270 scores 40246 (0.4% lower), and the Intel Core i9-13905H scores 40313 (0.6% lower). These four processors are all within 0.6% of the Ryzen 7 7700's average score, meaning any of them would produce nearly identical CPU-bound behavior in Rust. The Ryzen 7 7700 sits at the 87th percentile among all CPUs, so it is already a strong performer, and these rivals are effectively its peers.

On the GPU side, the RTX 5060's average benchmark score of 26331 is matched by a similar set of cards. The AMD Radeon 860M scores 26401 (0.3% higher), the NVIDIA GeForce MX550 scores 26421 (0.3% higher), the AMD Radeon RX 5700 XT 50th Anniversary scores 26553 (0.8% higher), and the AMD Radeon RX 6750 XT scores 26011 (1.2% lower). All of these are within 1.2% of the RTX 5060's average score, so they would deliver very similar frame rates in Rust at the same settings and resolution. The GPU's 72nd percentile ranking confirms it is a solid mid-range part, but the nearest rivals show that there is little to separate it from the pack.

CPU and GPU Roles

The measured FPS data reveals how the workload shifts between CPU and GPU across resolutions and presets. At 1080p Low, the system produces 175.7 FPS, which is the highest frame rate in the entire set. Dropping to 1440p Low reduces that to 119.4 FPS, and at 4K Low it falls to 68.7 FPS. This steep resolution scaling—roughly a 32% drop from 1080p to 1440p and another 42% drop from 1440p to 4K—indicates that the GPU is the primary bottleneck as pixel count increases. The CPU's strong single-thread performance (3DMark single-thread score of 1049, Cinebench R23 single-core of 1930) ensures that even at 1080p Low, the GPU is still the limiting factor, not the processor.

Preset scaling at a fixed resolution further supports the GPU-centric view. At 1080p, moving from Low to Medium drops FPS from 175.7 to 118.3, then to 100.9 at High, and finally to 72.9 at Ultra. That is a 58% reduction from Low to Ultra, a pattern consistent with increasing GPU load from shading, texture, and effects. At 1440p, the same progression goes from 119.4 (Low) to 78.7 (Medium) to 68.9 (High) to 51.3 (Ultra). At 4K, it falls from 68.7 (Low) to 46 (Medium) to 39.4 (High) to 31.7 (Ultra). The consistent drop across settings at every resolution shows that the GPU is the dominant factor, while the CPU's 8-core/16-thread design (Cinebench R23 multicore 18760) is more than sufficient to feed the GPU at these frame rates.

The CPU's role becomes more apparent at low resolutions and low presets, where frame rates exceed 100 FPS. At 1080p Low, the system hits 175.7 FPS, a figure that requires strong per-core performance. The Ryzen 7 7700's 3DMark 8-thread score of 6933 and max-thread score of 8479 indicate it can sustain high throughput, but the data shows that even at 1080p Low, the GPU is still the limiting component—otherwise the frame rate would not drop so sharply when resolution increases. In short, for Rust, the RTX 5060 is the decisive part at all tested resolutions and presets; the CPU provides headroom but never becomes the primary constraint.

FAQ

Q: Can this system run Rust at 60 FPS at 4K?

A: Yes, but only on Low settings. The measured average FPS at 3840x2160 Low is 68.7. Medium drops to 46, High to 39.4, and Ultra to 31.7, all below the 60 FPS threshold.

Q: What is the best preset for 1440p that stays above 60 FPS?

A: High settings at 2560x1440 yield an average of 68.9 FPS. Medium also clears 60 at 78.7 FPS, but Ultra falls to 51.3, so High is the highest preset that maintains 60+ FPS.

Q: How does the RTX 5060 compare to the AMD Radeon RX 6750 XT in terms of average benchmark score?

A: The RTX 5060 has an average benchmark score of 26331, while the RX 6750 XT scores 26011. That puts the RX 6750 XT 1.2% lower, meaning the RTX 5060 is slightly faster on average.

Q: What is the combo's rank among all tested CPU-GPU combinations in Rust?

A: The Ryzen 7 7700 + RTX 5060 ranks 1684 out of 3723 combos, placing it in the upper half of all tested systems.

Q: Does the CPU or GPU limit performance at 1080p Ultra?

A: The data shows 72.9 FPS at 1080p Ultra, which is above 60 FPS. Since the same GPU produces only 31.7 FPS at 4K Ultra, the GPU is clearly the limiting factor; the CPU's single-thread score of 1049 (3DMark) and 1930 (Cinebench R23) is more than adequate for this workload.

Q: Is the Ryzen 7 7700 a high-percentile CPU?

A: Yes, it sits at the 87th percentile among all CPUs, with an average benchmark score of 40081. Its nearest rival, the AMD Ryzen AI 9 365, is within 0.1% of that score.

The Verdict

The Ryzen 7 7700 + RTX 5060 can run Rust at 60 FPS or higher at 1080p and 1440p, but only at 4K on the lowest preset. At 1920x1080, every preset clears 60 FPS: Low averages 175.7, Medium 118.3, High 100.9, and Ultra 72.9. At 2560x1440, Low (119.4), Medium (78.7), and High (68.9) all exceed 60 FPS, while Ultra falls short at 51.3. At 3840x2160, only Low reaches 68.7 FPS; Medium (46), High (39.4), and Ultra (31.7) are all below the playable threshold. In summary, this system is fully playable at 1080p with maximum settings, at 1440p with High settings, and at 4K only with Low settings.

How This Combo Ranks

Among the 3723 CPU-GPU combinations tested in Rust, this pairing ranks 1684th. That places it in the top 45% of all systems (since 1684th of 3723 means it outperforms 2039 other combos). The rank reflects a balanced mid-range setup: the CPU's 87th percentile and GPU's 72nd percentile combine to produce frame rates that are competitive for 1080p and 1440p gaming, but not exceptional for 4K. The ranking is consistent with the measured FPS data—solid at lower resolutions, but limited by the GPU's 8 GB memory and 128-bit bus when pushed to 4K.

Best Settings per Resolution

The most demanding preset that maintains an average of at least 60 FPS at each resolution is as follows:

  • 1920x1080: Ultra, averaging 72.9 FPS. This is the highest preset available, and it clears the 60 FPS threshold with a 21.5% margin.
  • 2560x1440: High, averaging 68.9 FPS. Ultra drops to 51.3 FPS, so High is the best playable option, offering a 14.8% margin above 60 FPS.
  • 3840x2160: Low, averaging 68.7 FPS. Medium falls to 46 FPS, so Low is the only preset that remains playable, with a 14.5% margin above 60 FPS.

These settings represent the maximum visual quality the system can sustain while staying above the 60 FPS playability threshold in Rust.