Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
113 FPS
Ultra 1080p Measured
49 FPS

1440p (2K / QHD)

Low 1440p Measured
78 FPS
Ultra 1440p Measured
33 FPS

4K (Ultra HD)

Low 4K Measured
46 FPS
Ultra 4K Measured
20 FPS
15.6ms Frame Time
23ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 40,081
Graphics Card
Required 28,194
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 26 31 46
1440p QHD 33 44 52 78
1080p Full HD 49 64 76 113

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 113
1920x1080 Medium 76
1920x1080 Ultra 49
2560x1440 High 44
2560x1440 Low 78
2560x1440 Medium 52
2560x1440 Ultra 33
3840x2160 High 26
3840x2160 Low 46
3840x2160 Medium 31
3840x2160 Ultra 20

Performance Analysis: Rust on Your System

The AMD Ryzen 7 7700 and NVIDIA GeForce GTX 1070 combination delivers a playable experience in Rust, but the headroom is limited. The data shows a clear pattern: this system is comfortable at 1080p, acceptable at 1440p with reduced settings, and not viable at 4K. The GTX 1070, with its 8 GB of GDDR5 memory and 256-bit bus, remains a capable 1080p-class card, while the Ryzen 7 7700’s 8-core, 16-thread Zen 4 architecture provides ample CPU headroom that prevents bottlenecking in Rust’s demanding simulation and building mechanics.

Best Settings per Resolution

At 1920x1080, the highest preset that stays at or above 60 FPS is High, with an average of 64 FPS. This is the sweet spot for this combo. The data shows 113 FPS at Low and 76 FPS at Medium, but High offers the best visual fidelity while still clearing the 60 FPS threshold. Ultra drops to 49 FPS, which is below the playable mark.

At 2560x1440, the only setting that clears 60 FPS is Low, averaging 78 FPS. Medium falls to 52 FPS, High to 44 FPS, and Ultra to 33 FPS. If you want 60 FPS at 1440p, you must accept Low presets. The jump from 1080p to 1440p costs roughly 30-40% performance across all settings, which is typical for a GPU of this tier.

At 3840x2160, no preset reaches 60 FPS. The best recorded average is 46 FPS at Low, followed by 31 FPS at Medium, 26 FPS at High, and 20 FPS at Ultra. The GTX 1070’s 8 GB frame buffer and 256.3 GB/s bandwidth are insufficient for 4K gaming in Rust; even Low settings cannot sustain a playable frame rate.

How This Combo Ranks

The database ranks this specific CPU and GPU pairing at 3082 out of 3723 tested combos for Rust. This places it in the lower-middle tier of all possible configurations. In percentile terms, the CPU sits at the 87th percentile among all processors, while the GPU is at the 47th percentile among all graphics cards. The CPU is clearly not the limiting factor; the GTX 1070, being an end-of-life Pascal product, drags the overall ranking down.

The ranking reflects a system that can run the game, but not at high settings or high resolutions. The 3082 rank means roughly 83% of tested combos perform better in Rust. This is not a competitive or high-refresh-rate setup; it is a functional, mid-range configuration for 1080p play. The Ryzen 7 7700’s single-thread score of 1049 in 3DMark and 1930 in Cinebench R23 single-core ensures strong per-core performance, which Rust benefits from, but the GPU’s 6.463 TFLOPS FP32 throughput caps the frame rate.

Measured FPS Breakdown

1920x1080:

  • Low: average 113 FPS
  • Medium: average 76 FPS, minimum 64 FPS, maximum 87 FPS
  • High: average 64 FPS
  • Ultra: average 49 FPS

At 1080p, the scaling from Low to Ultra is steep. Low doubles the frame rate of Ultra. Medium provides a solid 76 FPS with a minimum of 64, which is safe. High at 64 FPS is right at the edge; occasional dips are possible. Ultra falls below the 60 FPS threshold, so it is not recommended.

2560x1440:

  • Low: average 78 FPS
  • Medium: average 52 FPS, minimum 44 FPS, maximum 60 FPS
  • High: average 44 FPS
  • Ultra: average 33 FPS

The 1440p results show a dramatic drop. Low is the only playable setting, and even then, the margin above 60 FPS is thin. Medium’s minimum of 44 FPS indicates stutter-prone gameplay. High and Ultra are clearly not viable for smooth play.

3840x2160:

  • Low: average 46 FPS
  • Medium: average 31 FPS, minimum 26 FPS, maximum 35 FPS
  • High: average 26 FPS
  • Ultra: average 20 FPS

At 4K, the system is overwhelmed. Even Low settings fail to reach 60 FPS. The GTX 1070’s memory bandwidth and fill rate are simply too low for Rust’s draw distances and object density at this resolution. This is a hard no for 4K.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 7 7700 are all within a fraction of a percent in average benchmark score. The AMD Ryzen AI 9 365 is 0.1% faster, the Intel Core 5 221E is 0.2% slower, the AMD Ryzen 9 270 is 0.4% slower, and the Intel Core i9-13905H is 0.6% slower. Any of these CPUs paired with the GTX 1070 would produce nearly identical frame rates in Rust, since the GPU is the bottleneck.

For the NVIDIA GeForce GTX 1070, the closest GPU rivals in average score are the AMD FirePro W5000 (0.2% slower), NVIDIA Quadro M2000M (0.5% slower), NVIDIA Tesla M10 (0.6% faster), and NVIDIA Tesla C2070 (0.7% faster). These are professional or mobile parts, but their rasterization performance is similar. In practical terms, swapping the GTX 1070 for any of these would yield a nearly indistinguishable experience in Rust. The Quadro M2000M and Tesla parts are not gaming-focused, but the benchmark data shows they land in the same performance envelope.

If you were to upgrade the CPU but keep the GTX 1070, the frame rates would not change meaningfully. The Ryzen 7 7700 already provides more than enough headroom; the 87th percentile CPU ranking confirms this. Conversely, upgrading the GPU would unlock the CPU’s potential, but that is outside the scope of this specific combo.

FAQ

Q: Can this system run Rust at 60 FPS on High settings?

A: Yes, but only at 1920x1080. The measured average is 64 FPS at High. At 2560x1440, High drops to 44 FPS, and at 3840x2160, High averages 26 FPS.

Q: What is the best resolution and preset for this combo?

A: The best playable configuration is 1920x1080 with High settings, averaging 64 FPS. At 2560x1440, only Low settings achieve 60 FPS, with a 78 FPS average. 4K is not playable at any preset.

Q: How does this combo rank against other tested systems?

A: It ranks 3082 out of 3723 combos for Rust. The CPU is in the 87th percentile of all processors, while the GPU is in the 47th percentile of all graphics cards.

Q: Is the CPU or GPU the limiting factor?

A: The GPU is the clear bottleneck. The Ryzen 7 7700 scores in the 87th percentile among CPUs, while the GTX 1070 sits at the 47th percentile among GPUs. Rust’s frame rates scale more with GPU load at the tested settings.

Q: What happens to frame rates when going from 1080p to 1440p?

A: Performance drops significantly. At Low settings, the average falls from 113 FPS to 78 FPS. At High, it falls from 64 FPS to 44 FPS. At Ultra, it falls from 49 FPS to 33 FPS.

Q: Are there any settings that provide a consistent 60 FPS minimum?

A: The data only provides minimums for Medium settings. At 1920x1080 Medium, the minimum is 64 FPS, which is safe. At 2560x1440 Medium, the minimum is 44 FPS, which is not. For other presets, only averages are recorded.

The Verdict

This PC can run Rust, but the experience is heavily dependent on resolution and settings. The verdict by resolution is clear:

  • 3840x2160: Not playable. No preset reaches 60 FPS. The best average is 46 FPS at Low.
  • 2560x1440: Playable only at Low settings, with a 78 FPS average. Medium drops to 52 FPS, which is below the playable threshold.
  • 1920x1080: Playable at High (64 FPS), Medium (76 FPS), and Low (113 FPS). Ultra at 49 FPS is not recommended.

For a smooth experience, stick to 1080p with High settings. This gives you 64 FPS average, which is acceptable for Rust’s survival gameplay, though not ideal for fast PvP combat. If you want 1440p, you must drop to Low, which sacrifices visual clarity for responsiveness. The GTX 1070 is a legacy card, and the data reflects its age: it handles 1080p well but struggles beyond that. The Ryzen 7 7700 ensures the system never becomes CPU-limited, but it cannot compensate for the GPU’s limitations. This is a functional 1080p gaming rig for Rust, not a high-end or future-proof one.