Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
142 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
100 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
60 FPS
Ultra 4K Measured
27 FPS
12.2ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 29,879
Graphics Card
Required 28,194
Your GPU 19,765

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 31 38 60
1440p QHD 45 59 67 100
1080p Full HD 60 82 97 142

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 82
1920x1080 Low 142
1920x1080 Medium 97
1920x1080 Ultra 60
2560x1440 High 59
2560x1440 Low 100
2560x1440 Medium 67
2560x1440 Ultra 45
3840x2160 High 31
3840x2160 Low 60
3840x2160 Medium 38
3840x2160 Ultra 27

Performance Analysis: Rust on Your System

The AMD Ryzen 7 5800XT paired with the AMD Radeon RX 6650 XT delivers a playable Rust experience at 1080p across all tested presets, with performance dropping off sharply at higher resolutions. This combination sits near the middle of the database’s tested configurations, ranking 2376th out of 3723 combos for this title. The measured data shows a clear resolution ceiling: 1440p remains viable at Medium settings, while 4K falls short of the 60 FPS threshold at every preset tested.

Similar Performance Alternatives

The CPU and GPU each have nearby hardware that would produce comparable behavior in Rust. For the Ryzen 7 5800XT, the nearest rivals in aggregate benchmark scores are the AMD Ryzen 7 7840H (deltaPct 0%), the AMD Ryzen 7 8845HS (deltaPct -0.3%), the AMD Ryzen 7 7840HS (deltaPct -0.3%), and the AMD Ryzen 5 9600X (deltaPct 0.6%). These processors score within a fraction of a percent of the 5800XT, meaning system builders could swap in any of these and expect nearly identical CPU-bound performance in Rust’s simulation-heavy gameplay.

On the GPU side, the RX 6650 XT’s nearest rivals are more unusual. The NVIDIA Tesla K40m (deltaPct -0.6%), AMD FirePro D300 (deltaPct 0.7%), AMD FirePro W7000 (deltaPct -0.7%), and NVIDIA Quadro K5200 (deltaPct 0.8%) all sit within one percent of the Radeon’s average benchmark score. These are professional or older workstation cards rather than gaming GPUs, which highlights that the RX 6650 XT occupies a specific performance tier where few direct gaming contemporaries exist in the database. The practical takeaway is that the 5800XT’s closest alternatives are mobile and desktop Ryzen 7 parts with matching multithreaded throughput, while the GPU’s nearest matches are less relevant for gaming but indicate the raw compute level.

CPU and GPU Roles

The data reveals a significant shift in component bottlenecking as resolution changes. At 1920x1080, the CPU’s 8-core, 16-thread design appears sufficient to feed the GPU, as evidenced by the 141.7 FPS average at Low settings. The scaling from Low to Ultra at 1080p shows a 81.4 FPS drop (from 141.7 to 60.3), which suggests the GPU becomes progressively more stressed as pixel load increases, but the CPU still keeps pace. The Ultra preset at 1080p manages 60.3 FPS, barely clearing the playable threshold.

Moving to 2560x1440, the relationship shifts. The Low preset drops to 100.3 FPS, a 41.4 FPS reduction from 1080p Low, while Ultra falls to 44.6 FPS. This represents a steeper proportional decline than the resolution change alone would suggest, indicating the GPU is now the limiting factor. The Medium preset at 1440p delivers 67.2 FPS, which is the best playable setting at that resolution. At 3840x2160, the GPU is clearly the dominant constraint: even Low settings produce only 59.8 FPS, just under the 60 FPS threshold, while High, Medium, and Ultra all fall well below.

The preset scaling across resolutions reinforces this. At 1080p, the FPS difference between Low and Ultra is a factor of roughly 2.35x. At 1440p, that factor expands to about 2.25x, but at 4K it compresses to 2.24x, because the GPU is saturated at every setting. The CPU’s role is most prominent at 1080p Low, where the 141.7 FPS result suggests headroom remains; at higher resolutions, the RX 6650 XT’s 8 GB GDDR6 memory and 128-bit bus become the binding constraints.

FAQ

Q: Can this PC run Rust at 4K resolution?

A: No measured preset at 3840x2160 reaches 60 FPS. The closest is Low at 59.8 FPS average, which sits just below the playable threshold. High, Medium, and Ultra produce 31.4, 38.2, and 26.7 FPS respectively, making 4K unplayable with this configuration.

Q: What is the best playable setting at 1440p?

A: Medium is the highest preset that clears 60 FPS, with an average of 67.2 FPS. Low runs faster at 100.3 FPS, but Medium offers better visual fidelity while maintaining a comfortable margin above the threshold. High and Ultra fall short at 58.8 and 44.6 FPS.

Q: How does the Ultra preset perform at 1080p?

A: Ultra averages 60.3 FPS, which just meets the 60 FPS playable floor. This is the most demanding setting that remains playable at 1080p. The margin is razor-thin, so any in-game scene with heavy draw calls could drop below 60 FPS despite the average being above.

Q: What frame rate does the Low preset achieve at 1080p?

A: Low settings produce an average of 141.7 FPS at 1920x1080. This is the highest measured result across all resolution and preset combinations, indicating that this configuration has substantial headroom for competitive play or high-refresh-rate monitors at lower graphical fidelity.

Q: Is the CPU or GPU more responsible for the performance ceiling?

A: The data indicates the GPU becomes the limiting factor as resolution increases. At 1080p, the CPU can drive 141.7 FPS at Low, but the GPU cannot maintain that at higher resolutions. The 4K results, where even Low only hits 59.8 FPS, confirm that the RX 6650 XT’s compute and memory bandwidth are the primary bottlenecks at high pixel counts.

Q: How many tested combinations does this system outperform?

A: This combo ranks 2376th out of 3723 tested combinations for Rust, placing it in the lower-middle portion of the database. It outperforms 1347 combinations but trails the majority of tested systems, consistent with its mid-range component tier.

The Verdict

This PC can run Rust, but only at 1080p and 1440p. At 1920x1080, all four presets are playable, with Ultra averaging 60.3 FPS — just over the threshold. Medium runs at 97.1 FPS, High at 81.8 FPS, and Low at 141.7 FPS. At 2560x1440, only Low and Medium are playable, with Medium being the best at 67.2 FPS. At 3840x2160, no preset reaches 60 FPS; the best result is Low at 59.8 FPS, which is technically unplayable by the 60 FPS standard. The verdict is clear: this system is a 1080p machine for Rust, with 1440p possible if the user accepts Medium settings or lower.

How This Combo Ranks

The combination of Ryzen 7 5800XT and RX 6650 XT ranks 2376th out of 3723 tested combinations for Rust. This places it in the 36th percentile of all tested systems, meaning it outperforms roughly 1,347 combinations but is beaten by about 2,346 others. The rank reflects the GPU’s mid-tier positioning — the CPU alone sits at the 81st percentile among all processors, while the GPU is at the 65th percentile among all GPUs. The aggregate combination rank is lower than both individual percentiles suggest, which indicates that Rust’s engine is not optimally utilizing the CPU’s 8-core advantage when paired with this GPU tier. The 5800XT’s 23,794 Cinebench R23 multicore score and 3,359 single-core score are strong, but the RX 6650 XT’s 17,166 Passmark G3D score becomes the bottleneck in GPU-bound scenes.

Best Settings per Resolution

At 1920x1080, the best playable setting is Ultra, with an average of 60.3 FPS. This is the highest preset that clears 60 FPS, though the margin is only 0.3 FPS. For users prioritizing smoothness over visual quality, Medium offers a substantial safety buffer at 97.1 FPS. At 2560x1440, Medium is the best playable setting at 67.2 FPS, providing a 7.2 FPS margin above the threshold. Low runs at 100.3 FPS but sacrifices significant visual detail. At 3840x2160, no setting is playable; the closest is Low at 59.8 FPS, which misses the threshold by 0.2 FPS. Users targeting 4K would need to lower resolution scaling or accept sub-60 FPS performance.

Measured FPS Breakdown

The measured results show a consistent pattern of performance degradation as resolution and preset quality increase. At 1920x1080, the range spans from 141.7 FPS at Low to 60.3 FPS at Ultra, with Medium at 97.1 FPS and High at 81.8 FPS. The transition from Low to Medium costs 44.6 FPS, while Medium to High costs 15.3 FPS, and High to Ultra costs 21.5 FPS. The largest single drop occurs between Low and Medium, suggesting the Medium preset introduces significant shading or texture effects.

At 2560x1440, the values are 100.3 FPS at Low, 67.2 FPS at Medium, 58.8 FPS at High, and 44.6 FPS at Ultra. The gap between Medium and High is 8.4 FPS, while High to Ultra costs 14.2 FPS. Notably, the 1440p High preset falls just below the 60 FPS threshold, making it nearly playable but not quite. The 4K results are uniformly below playable: 59.8 FPS at Low, 38.2 FPS at Medium, 31.4 FPS at High, and 26.7 FPS at Ultra. The 4K Low result is the only one that approaches the threshold, missing it by a mere 0.2 FPS. Across all resolutions, the Ultra preset consistently delivers roughly 42-48% of the Low preset’s frame rate, indicating the GPU’s pixel throughput is the dominant factor at higher settings.