Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 80 | 95 | 129 |
| 1440p QHD | 103 | 124 | 132 | 154 |
| 1080p Full HD | 127 | 141 | 150 | 174 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5090 D pairing delivers exceptional performance in Rust, with benchmark results showing playable frame rates across every tested resolution and preset combination. The data indicates that even at the most demanding settings, this combo consistently exceeds the 60 FPS playability threshold, making it a formidable choice for this survival title.
Measured FPS Breakdown
At 1920x1080, the combination produces its highest raw frame rates. With Low settings, the average FPS reaches 174, representing the peak performance of this pairing. Moving up to Medium settings, the average drops to 150 FPS, with a minimum of 127 FPS and a maximum of 172 FPS. High settings yield an average of 141 FPS, while Ultra settings still maintain a robust 127 FPS average. The scaling from Low to Ultra at 1080p shows a 47 FPS drop, indicating that the GPU has substantial headroom even at maximum graphical fidelity.
The 2560x1440 resolution presents a similar pattern with slightly reduced margins. Low settings produce an average of 154 FPS, while Medium settings deliver 132 FPS on average, with a minimum of 112 FPS and a maximum of 152 FPS. High settings achieve 124 FPS average, and Ultra settings maintain 103 FPS. The transition from 1080p to 1440p at Ultra settings results in a 24 FPS decrease, demonstrating that resolution scaling has a measurable but not prohibitive impact on performance.
At 3840x2160, the most demanding resolution tested, the combo still performs admirably. Low settings yield an average of 129 FPS, while Medium settings produce 95 FPS average, with a minimum of 81 FPS and a maximum of 109 FPS. High settings achieve 80 FPS average, and Ultra settings remain playable at 61 FPS average. The frame rate compression at 4K is evident, with the gap between Low and Ultra narrowing to 68 FPS, compared to 47 FPS at 1080p.
The minimum FPS data available for Medium settings across all resolutions shows consistent floor values: 127 FPS at 1080p, 112 FPS at 1440p, and 81 FPS at 4K. These minimums suggest that the combination avoids severe frame drops, even during demanding in-game scenarios.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, achieving an average of 127 FPS. This represents the maximum visual quality available while maintaining nearly double the playability threshold.
For 2560x1440, Ultra settings also remain the optimal choice, with an average of 103 FPS. This configuration provides ample headroom above the 60 FPS target, allowing for consistent performance even during intense gameplay moments.
At 3840x2160, Ultra settings still clear the 60 FPS threshold with an average of 61 FPS. This is the most demanding configuration that remains playable, though the margin is notably tighter compared to lower resolutions. The data shows that this combo can handle Rust at maximum settings across all tested resolutions, with the 4K Ultra preset being the only configuration that approaches the 60 FPS boundary.
FAQ
Q: Can this system run Rust at 4K with Ultra settings?
A: Yes, the benchmark data shows an average of 61 FPS at 3840x2160 with Ultra settings, which clears the 60 FPS playability threshold. However, the margin is slim compared to lower resolutions.
Q: What is the performance difference between 1080p and 4K at High settings?
A: At 1920x1080 High settings, the average FPS is 141. At 3840x2160 High settings, the average drops to 80 FPS. This represents a 61 FPS decrease when moving from 1080p to 4K.
Q: Does the system maintain smooth frame rates at Medium settings in 1440p?
A: Yes, Medium settings at 2560x1440 produce an average of 132 FPS, with a minimum of 112 FPS and a maximum of 152 FPS. The minimum frame rate remains well above the 60 FPS threshold.
Q: How does the combo perform at Ultra settings across different resolutions?
A: Ultra settings yield 127 FPS average at 1080p, 103 FPS at 1440p, and 61 FPS at 4K. This shows a progressive decline in performance as resolution increases, but all remain above 60 FPS.
Q: What is the lowest average FPS recorded in the benchmark data?
A: The lowest average FPS is 61, recorded at 3840x2160 with Ultra settings. This remains playable according to the 60 FPS threshold.
Q: Is the frame rate consistent across all tested presets?
A: The available minimum FPS data shows consistency. For Medium settings, minimums are 127 FPS at 1080p, 112 FPS at 1440p, and 81 FPS at 4K, all indicating stable performance without severe dips.
Similar Performance Alternatives
Based on nearest rival data, the CPU and GPU each have nearby hardware that would behave similarly. For the AMD Ryzen 7 5700X3D, the closest benchmark match is the AMD Ryzen 5 7600X3D, which scores an average of 24728 compared to the 5700X3D's 24709, a negligible 0.1% difference. The AMD Ryzen 9 5900HX scores 24822, representing a 0.5% advantage, while the Intel Core i5-12450HX scores 24576, just 0.5% behind. The Intel Core i5-11600 scores 24563, showing a 0.6% deficit.
For the NVIDIA GeForce RTX 5090 D, the AMD Radeon RX 6650M XT scores 76904 on average, which is 1.1% lower than the RTX 5090 D's 77712. The AMD Radeon RX 6850M XT scores 78940, a 1.6% advantage, while the NVIDIA Tesla P100 PCIe 12 GB scores 79396, 2.1% higher. The NVIDIA Tesla P100 PCIe 16 GB scores 79605, representing a 2.4% performance lead.
These small delta percentages suggest that swapping to any of these rival components would yield remarkably similar frame rates in Rust. The data implies that the specific choice among these alternatives would have minimal impact on the gaming experience, with differences well within the margin of perceptible performance variation.
How This Combo Ranks
The combination ranks 379 out of 3723 tested combos, placing it in the top 10.2% of all configurations in the database. This percentile positioning indicates that this pairing outperforms the vast majority of tested hardware combinations for Rust. The rank of 379 suggests that while there are 378 combinations that achieve higher performance, this setup remains comfortably within the upper echelon of gaming systems.
The RTX 5090 D's percentile of 92 among all GPUs and the Ryzen 7 5700X3D's percentile of 77 among all CPUs contribute to this strong ranking. The GPU's higher percentile relative to the CPU suggests that the graphics card is the more dominant component in this pairing, though the CPU's 3D V-Cache architecture likely contributes meaningfully to Rust's single-threaded and cache-sensitive workloads.
The Verdict
This PC can definitively run Rust with exceptional performance across all tested scenarios. The verdict data confirms that all four settings presets at all three resolutions are playable, with the least demanding configuration being 3840x2160 at Ultra settings, which still achieves 61 FPS average.
At 1920x1080, the system delivers 127 FPS average on Ultra settings, providing a smooth experience with substantial headroom for demanding scenes. At 2560x1440, Ultra settings maintain 103 FPS average, offering excellent visual quality with comfortable performance margins. At 3840x2160, Ultra settings achieve 61 FPS average, meeting the playability threshold but with less overhead.
The data suggests that players prioritizing maximum visual fidelity will find this combo fully capable, while those seeking higher frame rates can easily exceed 150 FPS by selecting Medium or Low settings at lower resolutions. The system never falls below the 60 FPS threshold in any tested configuration, making it a reliable choice for Rust regardless of resolution or quality preferences.
CPU and GPU Roles
The performance scaling across resolutions reveals how the CPU and GPU contribute differently to Rust's workload. At 1920x1080, the average FPS ranges from 174 at Low settings to 127 at Ultra, representing a 27% performance spread. This relatively narrow range suggests that at lower resolutions, the CPU plays a more significant role, as the GPU has sufficient bandwidth to render frames quickly and becomes less of a bottleneck.
Moving to 2560x1440, the spread between Low (154 FPS) and Ultra (103 FPS) widens to 33%, indicating that the GPU begins to exert more influence as pixel count increases. At 3840x2160, the range from Low (129 FPS) to Ultra (61 FPS) expands to 53%, demonstrating that the GPU becomes the primary limiting factor at 4K resolution.
The CPU's importance is further highlighted by the fact that at 1080p Low settings, the system achieves 174 FPS, suggesting that the Ryzen 7 5700X3D's cache architecture is well-suited to Rust's simulation-heavy gameplay. The GPU's role becomes more pronounced as resolution increases, with the RTX 5090 D's 32 GB of GDDR7 memory and substantial compute resources ensuring that 4K Ultra remains playable.
The 61 FPS result at 4K Ultra indicates that this is the point where the GPU's capabilities are most stretched, while the 174 FPS at 1080p Low suggests the CPU can feed frames faster than the GPU can render them at lower resolutions. This dynamic creates a balanced system where neither component consistently dominates, but rather alternates in importance depending on the resolution and preset selected.