Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
174 FPS
Ultra 1080p Measured
104 FPS

1440p (2K / QHD)

Low 1440p Measured
157 FPS
Ultra 1440p Measured
72 FPS

4K (Ultra HD)

Low 4K Measured
102 FPS
Ultra 4K Measured
45 FPS
7.2ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 24,709
Graphics Card
Required 28,194
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 57 65 102
1440p QHD 72 98 113 157
1080p Full HD 104 138 150 174

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 138
1920x1080 Low 174
1920x1080 Medium 150
1920x1080 Ultra 104
2560x1440 High 98
2560x1440 Low 157
2560x1440 Medium 113
2560x1440 Ultra 72
3840x2160 High 57
3840x2160 Low 102
3840x2160 Medium 65
3840x2160 Ultra 45

Performance Analysis: Rust on Your System

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5070 combination delivers a strong, high-refresh-rate experience in Rust, with the data showing that the pairing is capable of exceeding 100 FPS at 1080p and 1440p on most presets, while 4K remains a challenge for the highest settings. Benchmark results indicate that this combo ranks in the 764th position out of 3723 tested configurations, placing it comfortably above average for this title. The CPU's 3D V-Cache and the GPU's Blackwell architecture produce a balanced system where the RTX 5070 handles the graphical load efficiently, allowing the Ryzen 7 5700X3D's eight Zen 3 cores to feed frames without becoming a bottleneck at lower resolutions.

Measured FPS Breakdown

The measured frame rates reveal a clear progression of performance as resolution and graphical fidelity scale. At 1920x1080, the combo is exceptionally fast, with the Low preset producing an average of 173.7 FPS, the Medium preset at 149.9 FPS, and the High preset delivering 138.1 FPS. Pushing to Ultra reduces the average to 103.6 FPS, which still leaves ample headroom for a 100Hz display. The data shows that at this resolution, the GPU is not the limiting factor; the gap between Low and Ultra is only 70 FPS, indicating that the CPU's single-thread performance and cache are doing the heavy lifting to maintain high minimums.

Moving to 2560x1440, the frame rates remain highly playable but show a steeper drop-off as settings increase. The Low preset averages 157.1 FPS, which is a mere 16.6 FPS lower than at 1080p, demonstrating that the RTX 5070 has enough bandwidth to handle the pixel count increase. The Medium preset averages 112.7 FPS, High averages 98.1 FPS, and Ultra drops to 72.3 FPS. The delta between Low and Ultra at 1440p is 84.8 FPS, which is wider than at 1080p, suggesting that the GPU begins to take on more responsibility as the resolution climbs.

At 3840x2160, the RTX 5070's 12 GB of GDDR7 memory and 192-bit bus are tested severely. The Low preset averages 101.9 FPS, which is surprisingly high and indicates that even at 4K, the game's low-fidelity settings are not demanding on the GPU. The Medium preset drops to 65.4 FPS, which is just above the 60 FPS playability threshold. High falls to 56.5 FPS, and Ultra bottoms out at 44.9 FPS. The data shows a 57 FPS difference between Low and Ultra at 4K, a much larger spread than at lower resolutions, confirming that the GPU's shading units and memory bandwidth are the primary determinants of performance here. Notably, min and max FPS values are not provided in the dataset, so the analysis relies solely on averages.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 7 5700X3D sits within a tight performance cluster. The closest match is the AMD Ryzen 5 7600X3D, which has an average benchmark score of 24728 versus the 5700X3D's 24709, a negligible delta of -0.1%. This means that in CPU-bound scenarios, swapping to the 7600X3D would yield nearly identical frame rates in Rust. The AMD Ryzen 9 5900HX scores 24822, placing it 0.5% ahead, while the Intel Core i5-12450HX and Intel Core i5-11600 trail by 0.5% and 0.6% respectively. For Rust's simulation-heavy gameplay, any of these chips would perform within a 1% margin of the 5700X3D, making the choice dependent on platform preferences rather than raw performance.

The GPU's nearest rivals are more diverse, and the comparisons are striking. The AMD Radeon Pro 580 has an average score of 40318, which is 0.1% higher than the RTX 5070's 40377 score. The AMD Radeon Pro WX 7100 is 0.8% behind, and the AMD Radeon Pro 5300 is 1.2% ahead. The NVIDIA RTX A500 Mobile trails by 2.0%. These are all professional or mobile parts, and the data suggests that in raw compute terms, the RTX 5070 is in the same ballpark as workstation GPUs. However, for Rust specifically, the RTX 5070's driver optimizations and dedicated gaming features like DirectX 12 Ultimate support will likely translate to better real-world frame stability than these prosumer alternatives, even if their synthetic scores are close.

CPU and GPU Roles

The scaling between resolutions and presets clearly delineates the responsibilities of each component. At 1920x1080, the CPU is the dominant factor. The difference between Low (173.7 FPS) and Ultra (103.6 FPS) is 70 FPS, but the CPU's performance ceiling is visible: even at Low settings, the frame rate does not exceed 173.7 FPS, which aligns with the Ryzen 7 5700X3D's 3DMark single-thread score of 804 and Geekbench single-core score of 1849. The GPU is underutilized at this resolution, as evidenced by the fact that the RTX 5070's 30.87 TFLOPS of FP32 performance is not the limiting factor.

At 2560x1440, the balance shifts. The frame rate at Low (157.1 FPS) is only 16.6 FPS lower than at 1080p, showing that the CPU can still feed frames faster than the GPU can render them at low fidelity. However, the gap between Low and Ultra widens to 84.8 FPS, indicating that the GPU's shading rate and memory bandwidth are now being taxed. The RTX 5070's 672.0 GB/s bandwidth and 192 ROPs are sufficient to maintain 72.3 FPS at Ultra, but the CPU is no longer the sole bottleneck; both components are working in tandem.

At 3840x2160, the GPU is unequivocally the limiting factor. The CPU's role diminishes as resolution increases, and the data shows that the RTX 5070's 12 GB memory capacity and 192-bit bus struggle with the highest presets. The drop from Low (101.9 FPS) to Ultra (44.9 FPS) represents a 57 FPS swing, driven entirely by GPU load. The Ryzen 7 5700X3D's multi-thread score of 22366 in Cinebench R23 is more than sufficient to handle Rust's server and entity updates, but the GPU cannot keep pace with 4K Ultra demands. This is a classic case where the CPU provides the foundation, but the GPU dictates the final frame rate at high resolutions.

FAQ

Q: Is the AMD Ryzen 7 5700X3D + RTX 5070 combo capable of 60 FPS at 4K in Rust?

A: Yes, but only on Medium settings and below. The measured data shows 101.9 FPS on Low and 65.4 FPS on Medium at 3840x2160, both above the 60 FPS threshold. High and Ultra presets fall below 60 FPS, with averages of 56.5 and 44.9 FPS respectively.

Q: What is the best setting for 1440p gaming with this combo?

A: The Ultra preset is the best choice, as it averages 72.3 FPS at 2560x1440. This is above the playable threshold of 60 FPS and provides the highest visual fidelity while remaining smooth.

Q: How does this combo rank among all tested systems for Rust?

A: The combination ranks 764th out of 3723 total combos tested, placing it in the top 20% of all configurations. This percentile reflects its strong balance of CPU cache and GPU rasterization performance.

Q: Does the RTX 5070's 12 GB VRAM cause issues at 1080p?

A: No. At 1920x1080, the VRAM capacity is more than adequate, with the highest preset averaging 103.6 FPS. The memory bandwidth of 672.0 GB/s is not saturated at this resolution, as evidenced by the high frame rates across all settings.

Q: Should I worry about the CPU being a bottleneck at 1080p?

A: The data suggests the CPU is the primary limiter at 1080p, but not in a negative way. The Ryzen 7 5700X3D's single-thread score of 804 in 3DMark allows for 173.7 FPS on Low, which is excellent. The CPU's 96 MB L3 cache helps maintain stable frame pacing in Rust's complex scenes.

Q: Is the performance difference between Medium and High settings at 4K significant?

A: Yes, the difference is 8.9 FPS. Medium averages 65.4 FPS, while High averages 56.5 FPS. This 16% drop is substantial and pushes the experience below the 60 FPS playability line, making Medium the recommended setting for 4K.

Best Settings per Resolution

Based on the measured FPS data and the playable threshold of 60 FPS, the optimal settings are as follows:

At 3840x2160, the most demanding preset that maintains an average of at least 60 FPS is Medium, which delivers 65.4 FPS. The Low preset offers higher performance at 101.9 FPS, but Medium provides a better visual experience without sacrificing smoothness. High and Ultra are not viable, as they drop to 56.5 and 44.9 FPS respectively.

At 2560x1440, the Ultra preset is the best choice, averaging 72.3 FPS. This is the highest quality setting available and still exceeds the 60 FPS threshold by a comfortable margin. All presets (Low, Medium, High, and Ultra) are playable at this resolution, so users can prioritize visual fidelity without worrying about frame rate drops.

At 1920x1080, the Ultra preset is again the recommended option, with an average of 103.6 FPS. This provides a high-refresh-rate experience on most monitors, as the frame rate is well above 60 FPS and even approaches the limits of 144Hz displays. The Low preset reaches 173.7 FPS, but Ultra offers significantly better graphics while still maintaining smooth gameplay.

How This Combo Ranks

The AMD Ryzen 7 5700X3D + NVIDIA GeForce RTX 5070 combination holds the 764th rank out of 3723 tested combos in Rust, placing it in the upper 20% of all systems evaluated. This ranking reflects a well-matched pairing where neither component severely bottlenecks the other in the most common gaming scenarios. The CPU's 77th percentile ranking among all CPUs and the GPU's 82nd percentile ranking among all GPUs indicate that both parts are above average, and their synergy in Rust is effective.

The rank is particularly impressive given the game's demanding nature. Rust's large persistent worlds and dynamic entity interactions benefit from the 5700X3D's large L3 cache, while the RTX 5070's Blackwell architecture handles the game's DirectX 12 rendering efficiently. Compared to the nearest rival CPUs, the performance is nearly identical, meaning that the rank is largely determined by the GPU's contribution. The RTX 5070's 3DMark Steel Nomad score of 5077 and Passmark G3D score of 29137 confirm its capability, and the measured frame rates align with these synthetic benchmarks. For a 1440p high-refresh-rate setup, this combo is a solid choice, and for 1080p esports-style play, it excels. The 4K experience is limited to Medium settings, but the overall ranking shows that this is a competitive configuration for Rust players.