Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
193 FPS
Ultra 1080p Measured
99 FPS

1440p (2K / QHD)

Low 1440p Measured
158 FPS
Ultra 1440p Measured
68 FPS

4K (Ultra HD)

Low 4K Measured
92 FPS
Ultra 4K Measured
39 FPS
7.9ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 25,517
Graphics Card
Required 28,194
Your GPU 41,187

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 50 62 92
1440p QHD 68 86 104 158
1080p Full HD 99 127 149 193

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 127
1920x1080 Low 193
1920x1080 Medium 149
1920x1080 Ultra 99
2560x1440 High 86
2560x1440 Low 158
2560x1440 Medium 104
2560x1440 Ultra 68
3840x2160 High 50
3840x2160 Low 92
3840x2160 Medium 62
3840x2160 Ultra 39

Performance Analysis: Rust on Your System

The AMD Ryzen 7 5700 combined with the NVIDIA GeForce RTX 3080 Ti is a highly capable pairing for Rust, delivering smooth, playable performance at 1080p and 1440p across all tested presets, while 4K gaming is limited to Medium settings. The data confirms this combo sits in the 95th percentile of tested configurations, with the GPU acting as the primary performance driver at higher resolutions.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this system handles Rust across the three primary resolutions and four quality presets. At 1920x1080, the combo delivers exceptional headroom. With Low settings, the average frame rate hits 192.8 FPS, which is more than triple the 60 FPS playability threshold. Moving to Medium, the average drops to 148.7 FPS, still offering a very fluid experience. High settings produce 127 FPS on average, while the most demanding Ultra preset remains well above the playability line at 98.5 FPS. The scaling from Low to Ultra at 1080p represents a 49% reduction in frame rate, but even the worst-case scenario leaves substantial performance in reserve for demanding multiplayer scenes.

At 2560x1440, the performance profile remains strong but begins to show the expected resolution tax. Low settings deliver an average of 158 FPS, which is 18% lower than the 1080p Low result. Medium settings average 104 FPS, while High settings come in at 85.7 FPS. The Ultra preset at 1440p produces 67.8 FPS on average, which clears the 60 FPS threshold by a comfortable 13%. This indicates that 1440p Ultra is a viable option, though players who prioritize consistency over visual fidelity might prefer High settings for a larger buffer above the minimum playable frame rate.

The 3840x2160 results show the most significant performance impact. At 4K, Low settings average 91.8 FPS, which is still above the 60 FPS threshold. Medium settings average 61.5 FPS, barely clearing the playable line. High settings drop to 50.1 FPS, falling below the 60 FPS target, and Ultra settings average 38.8 FPS, which is not suitable for smooth gameplay. The gap between Low and Ultra at 4K is 58%, highlighting how quickly the GPU becomes the limiting factor at this resolution. The data shows that 4K gaming requires careful settings management, with only Low and Medium presets providing an acceptable experience.

How This Combo Ranks

The Ryzen 7 5700 and RTX 3080 Ti combination ranks 959th out of 3,723 tested combos in Rust, placing it in the top 26% of all configurations in the database. This percentile ranking reflects the strength of both components working together. The CPU alone sits at the 78th percentile against all CPUs, with an average benchmark score of 25,517, while the GPU achieves the 83rd percentile against all GPUs with an average score of 41,187.

The rank position is particularly impressive given the CPU's mid-range positioning. The Ryzen 7 5700's nearest rivals include the Intel Xeon D-2752TER, which scores 25,530 (a 0.1% difference), and the AMD Ryzen 5 6600H at 25,550 (a 0.1% difference). The AMD Ryzen 5 7640U scores 25,485 (0.1% higher), and the AMD Ryzen 7 5825U scores 25,446 (0.3% higher). These negligible differences confirm that the Ryzen 7 5700 performs at the level of these comparable chips.

On the GPU side, the RTX 3080 Ti's nearest rivals show similar performance clustering. The AMD Radeon Pro 5300 scores 40,870, which is 0.8% lower, while the NVIDIA Tesla M40 24 GB scores 41,707, a 1.2% difference. The NVIDIA Tesla M40 scores 41,897 (1.7% higher), and the newer NVIDIA GeForce RTX 5070 scores 40,377, coming in 2% lower. This indicates that the RTX 3080 Ti holds its own even against newer generation hardware, despite being an end-of-life product.

CPU and GPU Roles

The benchmark data reveals a clear shift in component roles as resolution increases. At 1920x1080, the CPU plays a more significant role in determining frame rates. The Ryzen 7 5700's eight cores and 16 threads, with a boost clock of 4.60 GHz, provide sufficient processing power to feed the RTX 3080 Ti at lower resolutions. The single-thread performance, evidenced by the Cinebench R23 single-core score of 2,916, keeps the game logic running smoothly. At 1080p, the GPU is not fully saturated, allowing the CPU to become the bottleneck in some scenarios.

As resolution increases to 2560x1440, the balance shifts toward the GPU. The RTX 3080 Ti's 10,240 shading units and 12 GB of GDDR6X memory on a 384-bit bus, providing 912.4 GB/s of bandwidth, handle the increased pixel workload more efficiently. The average frame rates drop by approximately 18-31% compared to 1080p, depending on the preset, indicating that the GPU is becoming the limiting factor. The Ultra preset at 1440p shows a 31% drop from its 1080p counterpart, confirming the GPU's growing influence.

At 3840x2160, the GPU's role becomes dominant. The RTX 3080 Ti's FP32 performance of 34.10 TFLOPS and pixel rate of 186.5 GPixel/s are pushed to their limits. The 4K results show the most significant frame rate drops, with the Ultra preset falling to 38.8 FPS. This is a 61% reduction from the 1080p Ultra result of 98.5 FPS. The CPU's contribution remains consistent across resolutions, but the GPU's inability to maintain higher frame rates at 4K Ultra clearly establishes it as the performance ceiling at this resolution.

The scaling between presets provides additional insight. At 1080p, moving from Low to Ultra reduces performance by 49%, while at 4K, the same preset change results in a 58% reduction. This widening gap suggests that the GPU's memory bandwidth and compute resources are increasingly taxed as both resolution and visual complexity increase. The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support at 51.2 GB/s provide stable feeding of the GPU, but the GPU's 350W TDP and thermal design point to its role as the primary consumer of performance headroom.

Similar Performance Alternatives

For users considering alternative hardware, the nearest rivals to the CPU and GPU provide useful reference points. The Ryzen 7 5700's closest competitors in raw compute performance include the Intel Xeon D-2752TER, which posts nearly identical benchmark scores (25,530 vs. 25,517), and the AMD Ryzen 5 6600H, which scores 25,550. These alternatives would behave similarly in Rust, though the Xeon D-2752TER targets a different market segment. The AMD Ryzen 5 7640U and Ryzen 7 5825U also fall within a 0.3% performance delta, meaning users coming from these processors would experience virtually identical frame rates.

On the GPU front, the RTX 3080 Ti's nearest rivals include the AMD Radeon Pro 5300, which delivers 0.8% lower average scores, and the NVIDIA Tesla M40 24 GB, which scores 1.2% higher. The Tesla M40, without the 24 GB variant, scores 1.7% higher. The NVIDIA GeForce RTX 5070, a newer generation card, scores 2% lower, suggesting that the RTX 3080 Ti remains a competitive option despite its end-of-life status. Users with these GPUs would see frame rates within a small margin of the RTX 3080 Ti's performance in Rust.

The practical implication is that this combo's performance profile is well-established. The CPU's rivals, with their similar multi-threaded scores (the Ryzen 7 5700 achieves 20,655 in Cinebench R23 multi-core), would not create a meaningful bottleneck difference. The GPU's rivals, all within a 2% performance band, would produce nearly identical results in Rust's GPU-bound scenarios at higher resolutions.

Best Settings per Resolution

The data identifies the most demanding preset that maintains at least 60 FPS at each resolution. At 1920x1080, the Ultra preset achieves an average of 98.5 FPS. This is the highest quality setting available and provides a 64% buffer above the playability threshold. Players can enable all visual features without concern for performance dips.

At 2560x1440, the Ultra preset also remains playable, with an average of 67.8 FPS. This clears the 60 FPS threshold by 13%, providing a playable experience, though the margin is smaller than at 1080p. The data suggests that 1440p Ultra is the best choice for visual quality, but players who prefer more headroom might select High settings, which average 85.7 FPS.

At 3840x2160, the Medium preset is the most demanding option that stays at or above 60 FPS, averaging 61.5 FPS. This represents a narrow 2.5% margin above the threshold. The High preset at 4K averages 50.1 FPS, which falls below the playable line. Players at 4K must accept Medium settings to maintain a consistent 60 FPS experience, and even then, the slim margin suggests that this combination is at its performance limit at this resolution.

The Verdict

This PC can confidently run Rust at 1920x1080 and 2560x1440 with all settings maxed out, delivering averages of 98.5 FPS and 67.8 FPS respectively on Ultra presets. Both resolutions clear the 60 FPS playability threshold with room to spare. At 3840x2160, the system is partially playable, with Low settings averaging 91.8 FPS and Medium settings averaging 61.5 FPS. However, High and Ultra presets at 4K fall below the threshold at 50.1 FPS and 38.8 FPS respectively, making them unsuitable for smooth gameplay.

The verdict is clear: players targeting 1080p or 1440p can enable the highest quality settings and enjoy a fluid experience. Those aiming for 4K must compromise on visual fidelity, choosing Medium settings to stay at 60 FPS. The RTX 3080 Ti's strong performance at lower resolutions, combined with the Ryzen 7 5700's capable multi-threading, makes this a versatile pairing for Rust. The 959th rank out of 3,723 tested combos reinforces that this system is well above average, with only the most demanding 4K Ultra scenario exposing its limitations.