Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
151 FPS
Ultra 1080p Measured
65 FPS

1440p (2K / QHD)

Low 1440p Measured
104 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
62 FPS
Ultra 4K Measured
27 FPS
11.6ms Frame Time
17ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 34,260
Graphics Card
Required 28,194
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 35 41 62
1440p QHD 45 59 70 104
1080p Full HD 65 86 102 151

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 86
1920x1080 Low 151
1920x1080 Medium 102
1920x1080 Ultra 65
2560x1440 High 59
2560x1440 Low 104
2560x1440 Medium 70
2560x1440 Ultra 45
3840x2160 High 35
3840x2160 Low 62
3840x2160 Medium 41
3840x2160 Ultra 27

Performance Analysis: Rust on Your System

Measured FPS Breakdown

The benchmark database records Rust performance for the AMD Ryzen 7 3700X paired with the AMD Radeon RX 9060 across three resolutions and four quality presets. The data shows a clear scaling pattern where higher resolutions and more demanding settings progressively reduce frame rates, with the most extreme combination dropping below 30 FPS and the lightest combination exceeding 150 FPS.

At 3840x2160 (4K), the measured results are as follows. On Low settings, the average frame rate is 62 FPS. Medium settings produce an average of 41 FPS, with a recorded minimum of 35 FPS and a maximum of 47 FPS. High settings average 35 FPS, while Ultra settings drop further to 27 FPS. The spread between Low and Ultra at 4K is 35 FPS, which represents a 56% reduction in average performance from the least to the most demanding preset. Notably, the minimum and maximum values are only provided for the Medium preset at this resolution, indicating that the database captured a full frame time range for that specific configuration.

Moving to 2560x1440 (1440p), the results show a substantial improvement over 4K. Low settings deliver an average of 104 FPS. Medium settings average 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. High settings average 59 FPS, and Ultra settings average 45 FPS. The gap between Low and Ultra at 1440p is 59 FPS, meaning Ultra runs at roughly 43% of the Low preset's performance level. The Medium preset here again has the only complete min/max data, showing a 21 FPS range between its lowest and highest recorded frames.

At 1920x1080 (1080p), the combination performs best overall. Low settings reach an average of 151 FPS. Medium settings average 102 FPS, with a minimum of 86 FPS and a maximum of 117 FPS, representing a 31 FPS range. High settings average 86 FPS, while Ultra settings average 65 FPS. The difference between Low and Ultra at 1080p is 86 FPS, which means Ultra runs at 43% of the Low preset's average frame rate, a similar proportional drop to what is observed at 1440p.

Comparing across resolutions at the same settings, the scaling is consistent. For Low settings, the average FPS goes from 151 at 1080p, to 104 at 1440p, to 62 at 4K. That is a 47 FPS drop from 1080p to 1440p, and a further 42 FPS drop from 1440p to 4K. For Medium settings, the averages are 102, 70, and 41 FPS respectively. For High settings, the averages are 86, 59, and 35 FPS. For Ultra settings, the averages are 65, 45, and 27 FPS. The data indicates that the performance penalty for increasing resolution is roughly consistent across all presets, though the absolute losses are larger at lower settings where the starting frame rates are higher.

Best Settings per Resolution

The playable threshold for this analysis is defined as 60 FPS average. Based on the measured data, the most demanding preset that maintains an average of at least 60 FPS varies by resolution.

At 3840x2160, the only setting that clears the 60 FPS threshold is Low, which averages 62 FPS. Medium falls short at 41 FPS, High at 35 FPS, and Ultra at 27 FPS. Therefore, the best playable setting at 4K is Low, with an average of 62 FPS. This leaves very little headroom above the threshold, as the average is only 2 FPS above 60.

At 2560x1440, both Low and Medium presets clear the threshold. Low averages 104 FPS, and Medium averages 70 FPS. High falls just below at 59 FPS, and Ultra is further behind at 45 FPS. The best playable setting at 1440p is Medium, with an average of 70 FPS. This provides a comfortable margin of 10 FPS above the threshold, and the recorded minimum of 59 FPS for Medium means that occasional dips may briefly touch the threshold line, but the average remains solidly playable.

At 1920x1080, all four presets clear the 60 FPS threshold. Low averages 151 FPS, Medium averages 102 FPS, High averages 86 FPS, and Ultra averages 65 FPS. The best playable setting at 1080p is Ultra, with an average of 65 FPS. This is the only resolution where the highest quality preset is playable, and it offers a 5 FPS margin above the threshold. For players who prefer higher frame rates over maximum visual fidelity, the Low preset at 1080p delivers more than double the frame rate of Ultra.

CPU and GPU Roles

The recorded data allows for an analysis of how the CPU and GPU each contribute to performance in Rust at different resolutions. The Ryzen 7 3700X is an 8-core, 16-thread processor based on the Zen 2 architecture, while the Radeon RX 9060 is a discrete GPU with 8 GB of GDDR6 memory and 1792 shading units. Their respective roles shift depending on the resolution and preset being used.

At 3840x2160, the GPU is clearly the dominant constraint. The frame rates are low across all presets, ranging from 27 to 62 FPS, which indicates that the rendering workload at 4K exceeds what the RX 9060 can sustain. The scaling between presets at 4K is stark: Low averages 62 FPS, Medium drops to 41 FPS, High to 35 FPS, and Ultra to 27 FPS. This 35 FPS spread between Low and Ultra shows that the GPU is heavily loaded, and reducing graphical quality has a direct and substantial impact on performance. The CPU's role at 4K is likely secondary, as the GPU is saturated with pixel and shading work.

At 2560x1440, the balance shifts somewhat. The frame rates are higher overall, with Low averaging 104 FPS and Medium averaging 70 FPS. The gap between Low and Medium is 34 FPS, and the gap between Medium and High is 11 FPS. This suggests that the GPU is still the primary limiter, but the CPU is becoming more relevant as the resolution decreases and the GPU has more headroom. The fact that High averages 59 FPS and Ultra averages 45 FPS indicates that the GPU still struggles with the heavier presets at 1440p, but the CPU is capable of feeding it enough data to reach over 100 FPS on Low settings.

At 1920x1080, the CPU becomes a more significant factor. The frame rates are high across the board, with Low averaging 151 FPS and Medium averaging 102 FPS. The scaling from Low to Medium at 1080p is a 49 FPS drop, which is larger in absolute terms than the corresponding drop at 1440p (34 FPS) or 4K (21 FPS). This implies that at 1080p, the CPU is able to push frame rates high enough that the GPU becomes the bottleneck even at lower settings, but the CPU's ceiling is also being approached. The fact that Ultra still averages 65 FPS at 1080p, while it only manages 45 FPS at 1440p and 27 FPS at 4K, demonstrates that the GPU workload scales significantly with resolution.

In summary, the data indicates that the RX 9060 is the limiting factor at 4K and at higher presets across all resolutions. The Ryzen 7 3700X provides enough processing power to support high frame rates at 1080p on lower settings, but even at 1080p, the GPU's performance ceiling is reached when moving from Low to Medium. The CPU's influence is most visible at 1080p Low, where the 151 FPS average suggests that the processor can handle the game's simulation and draw call overhead without being the primary constraint.

How This Combo Ranks

Within the database of tested hardware combinations for Rust, the AMD Ryzen 7 3700X and AMD Radeon RX 9060 combination ranks 2190 out of 3723 total combos. This places it in the lower half of all tested configurations, specifically at approximately the 41st percentile of the ranking distribution. The rank reflects the measured FPS across all resolutions and presets, weighted by the playability criteria.

The percentile position indicates that this combination sits below the median performer in the database. Given that the CPU itself ranks in the 84th percentile against all CPUs in the database, and the GPU ranks in the 59th percentile against all GPUs, the combined result for Rust is lower than either component's individual standing. This suggests that Rust's specific workload characteristics, which often include heavy CPU simulation and memory access patterns, do not favor this particular pairing as strongly as other games might.

The combo rank of 2190 out of 3723 means that a substantial number of alternative combinations deliver better measured performance in Rust. This is consistent with the FPS data, which shows that the system struggles to maintain 60 FPS at 4K except on Low settings, and falls short of 60 FPS at 1440p on High and Ultra presets. The combination is more competitive at 1080p, where all presets clear the threshold, but the overall ranking is dragged down by the 4K and higher preset results.

Similar Performance Alternatives

The database provides nearest rival comparisons for both the CPU and GPU individually, which helps identify what other hardware would behave similarly in this system.

For the CPU, the Ryzen 7 3700X has an average benchmark score of 34260. Its nearest rivals are the AMD Ryzen AI 7 350 with a score of 34222 (0.1% lower), the AMD EPYC 4244P with a score of 34220 (0.1% lower), the Intel Core i5-13450HX with a score of 34333 (0.2% higher), and the Intel Core Ultra 7 165H with a score of 34083 (0.5% lower). These CPUs are all within a half percent of the Ryzen 7 3700X in aggregate benchmark performance, which means that swapping the 3700X for any of these would likely produce nearly identical frame rates in Rust, assuming the GPU remains the same. The differences are well within measurement noise for most gaming workloads.

For the GPU, the Radeon RX 9060 has an average benchmark score of 16014. Its nearest rivals are the NVIDIA GeForce RTX 3060 Ti with a score of 16129 (0.7% higher), the AMD Radeon R9 370X with a score of 15862 (1% lower), the AMD Radeon RX 7700 with a score of 15852 (1% lower), and the AMD Radeon Pro W5500 with a score of 15679 (2.1% lower). The RTX 3060 Ti is the closest competitor in raw performance, and it would be expected to deliver nearly the same FPS in Rust as the RX 9060, within a margin of less than 1%. The Radeon R9 370X and RX 7700 are both about 1% slower, and the Pro W5500 is about 2% slower, all of which would result in very similar gameplay experiences.

Combining these comparisons, a system with the Ryzen 7 3700X and an RTX 3060 Ti would perform almost identically to the tested RX 9060 configuration in Rust, with the GPU being the slightly faster component by 0.7%. A system with the Ryzen AI 7 350 and the RX 9060 would also be nearly indistinguishable, with the CPU being 0.1% slower. The practical takeaway is that this combination sits in a cluster of hardware that delivers very similar Rust performance, and users with any of these nearby components would see comparable frame rates.

FAQ

Q: What is the average FPS at 1080p on Ultra settings?

A: The measured average FPS at 1920x1080 on Ultra settings is 65 FPS, which clears the 60 FPS playable threshold.

Q: Can this system run Rust at 4K with playable frame rates?

A: At 3840x2160, only the Low preset achieves a playable average of 62 FPS. Medium averages 41 FPS, High averages 35 FPS, and Ultra averages 27 FPS, all of which fall below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rival, the AMD Ryzen AI 7 350?

A: The Ryzen 7 3700X has an average benchmark score of 34260, while the AMD Ryzen AI 7 350 scores 34222, which is 0.1% lower. The two CPUs are effectively tied in performance.

Q: What is the best playable setting at 1440p?

A: The best playable setting at 2560x1440 is Medium, which averages 70 FPS. Low averages 104 FPS, but Medium offers higher visual quality while still maintaining an average above 60 FPS.

Q: How does the RX 9060 compare to the NVIDIA GeForce RTX 3060 Ti?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti scores 16129, which is 0.7% higher. The RTX 3060 Ti is slightly faster, but the difference would translate to a negligible FPS change in Rust.

Q: Does the system maintain 60 FPS at 1080p on all presets?

A: Yes, at 1920x1080 all four presets clear the threshold. Low averages 151 FPS, Medium averages 102 FPS, High averages 86 FPS, and Ultra averages 65 FPS.

The Verdict

The data shows that the AMD Ryzen 7 3700X paired with the AMD Radeon RX 9060 can run Rust, but the experience depends heavily on resolution and settings. The verdict by resolution is clear.

At 3840x2160, the system is only playable on Low settings, where it averages 62 FPS. This barely clears the 60 FPS threshold, so players at 4K must accept the lowest visual quality preset to maintain smooth gameplay. Medium, High, and Ultra all fall below 60 FPS, with averages of 41, 35, and 27 FPS respectively. The system is technically capable of running Rust at 4K, but only at the cost of visual fidelity.

At 2560x1440, the system has more flexibility. Low and Medium are both playable, with averages of 104 FPS and 70 FPS respectively. Medium is the best playable setting, offering a good balance of visual quality and performance with a 10 FPS margin above the threshold. High falls just short at 59 FPS, and Ultra averages 45 FPS. Players at 1440p should stick to Medium for a consistent experience.

At 1920x1080, the system is fully playable across all presets. Ultra averages 65 FPS, High averages 86 FPS, Medium averages 102 FPS, and Low averages 151 FPS. This is the resolution where the combination shines, as it can deliver maximum quality settings while staying above the 60 FPS threshold. The 5 FPS margin on Ultra is acceptable, and players who prefer higher frame rates can drop to High or Medium for a substantial boost.

In summary, this PC can run Rust at 1080p with all settings playable, at 1440p with Low or Medium settings, and at 4K with Low settings only. The combination is best suited for 1080p gaming, where it provides a smooth experience at the highest quality preset. For higher resolutions, users must be willing to compromise on graphical settings to maintain playable frame rates.