Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

70%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
140 FPS
Ultra 1080p Measured
58 FPS

1440p (2K / QHD)

Low 1440p Measured
99 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
55 FPS
Ultra 4K Measured
24 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 34,260
Graphics Card
Required 28,194
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 33 36 55
1440p QHD 42 56 66 99
1080p Full HD 58 78 92 140

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 140
1920x1080 Medium 92
1920x1080 Ultra 58
2560x1440 High 56
2560x1440 Low 99
2560x1440 Medium 66
2560x1440 Ultra 42
3840x2160 High 33
3840x2160 Low 55
3840x2160 Medium 36
3840x2160 Ultra 24

Performance Analysis: Rust on Your System

The AMD Ryzen 7 3700X paired with the AMD Radeon RX 7600 delivers a mixed set of results in Rust, with playability depending heavily on resolution and preset. The recorded data shows a CPU that sits at the 84th percentile among all processors and a GPU at the 57th percentile among all graphics cards, but the combination’s in-game performance reveals clear bottlenecks at higher resolutions. Below is a full breakdown of the measured FPS, the role each component plays, and what settings you can realistically use.

Measured FPS Breakdown

At 1920x1080, the combination delivers its strongest performance. With the Low preset, the average FPS is 139.8, which is well above the 60 FPS threshold. Moving to Medium drops the average to 92.3, still comfortably playable. The High preset yields an average of 78.1 FPS, while the Ultra preset falls to 57.6 FPS, just below the 60 FPS playability mark. This means at 1080p, three of the four presets clear the threshold, and only Ultra misses it.

At 2560x1440, performance declines noticeably. Low settings produce an average of 99 FPS, which remains strong. Medium follows at 65.7 FPS, still above the 60 FPS line. High drops to 55.8 FPS, and Ultra falls further to 42.2 FPS. The data shows that only Low and Medium are playable at this resolution, with High and Ultra failing to maintain 60 FPS.

At 3840x2160, the situation becomes much more demanding. Low settings average 55.3 FPS, which is below the 60 FPS threshold. Medium averages 35.6 FPS, High averages 32.7 FPS, and Ultra averages 23.5 FPS. None of the presets at 4K reach 60 FPS, and even the lowest settings fall short by roughly 5 FPS. The measured data indicates that 4K is not a viable option for this combo in Rust, regardless of preset.

Across all resolutions, the pattern is consistent: lower presets yield higher frame rates, and the gap between Low and Ultra widens as resolution increases. At 1080p, the difference between Low and Ultra is 82.2 FPS. At 1440p, that difference is 56.8 FPS. At 4K, the difference shrinks to 31.8 FPS, which suggests that at higher resolutions, the GPU becomes the limiting factor, compressing the range of achievable frame rates.

CPU and GPU Roles

The scaling between resolutions reveals how the CPU and GPU split the workload in Rust. At 1920x1080, the CPU plays a more prominent role. The Ryzen 7 3700X, with its 8 cores and 16 threads, is capable of feeding the RX 7600 at lower pixel counts. The jump from 1080p Low (139.8 FPS) to 1440p Low (99 FPS) represents a drop of about 29%, which is substantial but not catastrophic. This indicates that even at 1440p Low, the GPU is still able to process frames quickly enough that the CPU does not become the sole bottleneck.

As resolution increases to 3840x2160, the GPU’s workload grows disproportionately. At 4K Low, the average FPS is 55.3, which is only about 40% of the 1080p Low figure. This steep drop is typical of a GPU-bound scenario, where the RX 7600’s 8 GB of GDDR6 memory and 128-bit bus width struggle to keep up with the pixel throughput required at 4K. The GPU’s memory bandwidth of 288.0 GB/s is simply insufficient for sustained high frame rates at that resolution.

Preset scaling also highlights the component roles. At 1080p, moving from Low to Ultra reduces FPS from 139.8 to 57.6, a 59% decrease. This large sensitivity to settings suggests that both CPU and GPU are being exercised, but the GPU’s shading units (2048) and texture units (128) are the primary drivers of the drop. At 4K, the same preset change only reduces FPS from 55.3 to 23.5, a 57% decrease, but the absolute numbers are much lower, reinforcing that the GPU is saturated at this resolution.

The data indicates that for this game, the RX 7600 is the limiting factor at 1440p and above, while the Ryzen 7 3700X provides sufficient headroom at 1080p. The CPU’s multi-threaded performance, as shown by its PassMark multi-thread score of 22458, is more than adequate for Rust’s survival mechanics, which often involve many entities and server-side calculations. However, the GPU’s raw fill rate and memory bandwidth cap the maximum achievable FPS at higher resolutions.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 7 3700X has an average benchmark score of 34260. The AMD Ryzen AI 7 350 scores 34222, a delta of 0.1%, meaning it is virtually identical in overall performance. The AMD EPYC 4244P scores 34220, also a 0.1% delta. The Intel Core i5-13450HX scores 34333, which is 0.2% higher than the 3700X. The Intel Core Ultra 7 165H scores 34083, 0.5% lower. In practical terms, any of these CPUs would deliver nearly the same frame rates in Rust when paired with the same GPU, with differences well under 1% in synthetic benchmarks.

For the GPU, the AMD Radeon RX 7600 has an average benchmark score of 15171. The NVIDIA GeForce RTX 3050 OEM scores 15199, a delta of -0.2%, meaning it is slightly faster by a negligible margin. The AMD Radeon Pro 560X scores 15082, 0.6% slower. The AMD Radeon 680M scores 15270, which is 0.7% faster. The NVIDIA GeForce GTX 660 Ti scores 15063, 0.7% slower. These deltas are all within 1%, so swapping the RX 7600 for any of these alternatives would result in nearly identical FPS in Rust. The RTX 3050 OEM, in particular, would behave almost exactly the same, though it lacks the RX 7600’s ray tracing capabilities (32 RT cores), which are not relevant for Rust’s typical settings.

How This Combo Ranks

In the database, this specific combination of CPU and GPU ranks 2551 out of 3723 tested combos in Rust. This places it in the lower half of all tested configurations, around the 31st percentile. The ranking reflects the fact that while the CPU is above average (84th percentile) and the GPU is around average (57th percentile), the pairing does not excel in this particular game. Many other combos, especially those with higher-end GPUs or newer architectures, achieve better FPS at 1440p and 4K.

The rank of 2551 out of 3723 indicates that there are roughly 1172 combos that perform worse, but also over 2500 that perform better. This is not a top-tier configuration for Rust, but it is far from the bottom. The measured FPS at 1080p High (78.1) and 1440p Medium (65.7) are respectable, but the inability to hit 60 FPS at 4K or even 1440p High keeps the rank in the lower half.

The Verdict

Can this PC run Rust? The answer depends on the target resolution and preset. Based on the verdict data, at 3840x2160, there are no playable settings, meaning no preset reaches 60 FPS. The closest is Low at 55.3 FPS, but that falls short of the playable threshold. At 2560x1440, the playable settings are Low and Medium, with Medium being the best option at 65.7 FPS. At 1920x1080, the playable settings are High, Low, and Medium, with High being the best at 78.1 FPS.

For a smooth 60 FPS experience, 1080p is the safest choice. The High preset at 78.1 FPS provides solid headroom above the threshold, and even the Ultra preset at 57.6 FPS is close, though technically below 60. At 1440p, you can run Medium at 65.7 FPS, which is playable, but you must avoid High and Ultra. At 4K, this combo is not viable for 60 FPS gameplay, and you would need to lower the resolution or accept frame rates in the 20s to 50s range.

Best Settings per Resolution

At 3840x2160, there is no best setting because no preset achieves 60 FPS. The highest average FPS is 55.3 at Low, but that still fails the playability threshold.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, with an average FPS of 65.7. This is the recommended choice for a balance of visual quality and smooth gameplay.

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average FPS of 78.1. This provides good visual fidelity while maintaining a comfortable margin above the 60 FPS line.

FAQ

Q: Can this PC run Rust at 4K with 60 FPS?

A: No. At 3840x2160, the highest average FPS recorded is 55.3 at Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra all fall further, with averages of 35.6, 32.7, and 23.5 FPS respectively.

Q: What is the best preset for 1440p gaming?

A: At 2560x1440, the best playable preset is Medium, which delivers an average of 65.7 FPS. High and Ultra are not playable since they average 55.8 and 42.2 FPS, both below 60.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 7 3700X has an average benchmark score of 34260. Its nearest rivals, the AMD Ryzen AI 7 350 and AMD EPYC 4244P, score 34222 and 34220 respectively, both within 0.1% of the 3700X. The Intel Core i5-13450HX is 0.2% faster, and the Intel Core Ultra 7 165H is 0.5% slower.

Q: Is the GPU strong enough for Rust at 1080p Ultra?

A: No. At 1920x1080 with Ultra settings, the average FPS is 57.6, which is below the 60 FPS threshold. The High preset at 78.1 FPS is the highest playable setting at this resolution.

Q: What GPU is closest in performance to the RX 7600?

A: The NVIDIA GeForce RTX 3050 OEM has an average score of 15199, which is 0.2% lower than the RX 7600’s 15171. The AMD Radeon 680M is 0.7% faster, while the AMD Radeon Pro 560X and NVIDIA GeForce GTX 660 Ti are 0.6% and 0.7% slower, respectively.

Q: How many tested combos does this setup rank above?

A: This combo ranks 2551 out of 3723 tested combos in Rust, meaning it performs better than 1172 other combinations but worse than 2550. The rank places it in the lower half of the database.