Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

64%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
141 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
60 FPS
Ultra 4K Measured
26 FPS
12.2ms Frame Time
18ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 29,713
Graphics Card
Required 28,194
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 35 41 60
1440p QHD 42 52 61 95
1080p Full HD 63 82 90 141

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 82
1920x1080 Low 141
1920x1080 Medium 90
1920x1080 Ultra 63
2560x1440 High 52
2560x1440 Low 95
2560x1440 Medium 61
2560x1440 Ultra 42
3840x2160 High 35
3840x2160 Low 60
3840x2160 Medium 41
3840x2160 Ultra 26

Performance Analysis: Rust on Your System

The AMD Ryzen 5 9600X and Radeon RX 7600 combination delivers a split verdict in Rust, depending entirely on resolution. At 1080p, this rig is fully playable across all presets, while 1440p requires a dial-back to Medium, and 4K falls short of the 60 FPS threshold even on Low settings. The measured data, drawn directly from benchmark runs, shows a clear pattern: this is a capable 1080p machine with headroom for high-refresh play, a workable 1440p setup with compromises, and a 4K experience that misses the playable mark.

Measured FPS Breakdown

The measured FPS data for Rust spans three resolutions (1920x1080, 2560x1440, 3840x2160) and four settings presets (Low, Medium, High, Ultra). All figures are average FPS; no minimum or maximum values were recorded in the dataset.

At 1920x1080, the results are consistently strong. Low settings produce an average of 141.4 FPS, which is more than double the 60 FPS playable threshold. Medium settings yield 90.4 FPS, High settings produce 82.2 FPS, and even the most demanding Ultra preset holds at 62.5 FPS. The spread between Low and Ultra is 78.9 FPS, indicating that the GPU has substantial headroom at this resolution — the most demanding preset still clears the playable bar by a comfortable 2.5 FPS margin.

Moving to 2560x1440, the picture changes notably. Low settings deliver 94.6 FPS, a 33.2 FPS drop from the 1080p Low result. Medium settings produce 61.4 FPS, which barely clears the 60 FPS threshold. High settings drop to 51.5 FPS, and Ultra falls to 41.8 FPS. The gap between Low and Ultra at 1440p is 52.8 FPS, a wider relative spread than at 1080p, suggesting that resolution scaling puts increasing pressure on the GPU as settings rise.

At 3840x2160, the results are mostly sub-60. Low settings manage 59.7 FPS, just 0.3 FPS short of the playable threshold. Medium produces 40.9 FPS, High yields 34.9 FPS, and Ultra bottoms out at 25.9 FPS. The difference between Low and Ultra at 4K is 33.8 FPS, and even the best-case Low preset fails to reach 60 FPS. This is a clear indication that the RX 7600’s 8 GB GDDR6 memory and 128-bit bus are not sufficient for 4K Rust at acceptable frame rates.

Best Settings per Resolution

The data identifies the most demanding preset that stays at or above 60 FPS for each resolution. At 1920x1080, the answer is Ultra, with an average of 62.5 FPS. This is the highest settings preset available, and it clears the playable threshold. The 1080p Ultra result is 2.5 FPS above the 60 FPS line, leaving only a slim margin — but it is technically playable.

At 2560x1440, the best playable setting is Medium, averaging 61.4 FPS. This is the only preset above 60 FPS at this resolution besides Low, which delivers 94.6 FPS. High (51.5 FPS) and Ultra (41.8 FPS) fall short. Medium at 1440p is nearly identical to Ultra at 1080p in terms of frame rate — 61.4 FPS versus 62.5 FPS — but the visual quality difference is substantial, as Medium is a lower preset tier.

At 3840x2160, no settings preset reaches 60 FPS. The best case is Low at 59.7 FPS, which misses the threshold by 0.3 FPS. The verdictByResolution field confirms this: the playableSettings list for 4K is empty, and bestSettings is null. This means the combination cannot run Rust at 4K with any preset that maintains 60 FPS.

The pattern across resolutions is consistent: dropping resolution by one step (from 4K to 1440p) allows the player to move from no playable settings to Medium; dropping from 1440p to 1080p allows Ultra. The data shows that each resolution tier roughly corresponds to a one-level settings improvement at comparable frame rates.

CPU and GPU Roles

Rust is a game that stresses both CPU and GPU, but the measured FPS scaling reveals which component dominates at each resolution. The CPU, AMD Ryzen 5 9600X, has 6 cores and 12 threads with a boost clock of 5.40 GHz. Its benchmark scores include a Cinebench R23 multicore result of 17528.5 and a single-core score of 2183.5, placing it in the 81st percentile of all CPUs. The GPU, AMD Radeon RX 7600, has 2048 shading units and a boost clock of 2655 MHz, with a Passmark G3D score of 16634, sitting in the 57th percentile of all GPUs.

At 1920x1080, the GPU appears to be the primary constraint, but not overwhelmingly so. The transition from Low (141.4 FPS) to Ultra (62.5 FPS) shows a 78.9 FPS drop, indicating that the GPU is doing most of the work at higher presets. However, the CPU must be keeping pace, as even the most demanding preset stays above 60 FPS. The Ryzen 5 9600X’s strong single-thread performance (Geekbench single-core score of 2923) likely prevents CPU bottlenecks at this resolution.

At 2560x1440, the GPU becomes the clear limiting factor. The drop from Low (94.6 FPS) to Medium (61.4 FPS) is 33.2 FPS, and the further drop to Ultra (41.8 FPS) is another 19.6 FPS. This 52.8 FPS total spread between Low and Ultra at 1440p is larger than the 33.8 FPS spread at 4K, which is counterintuitive — it suggests that at 1440p, the GPU is being pushed across a wider performance envelope, while at 4K, the GPU is already saturated even at Low settings.

At 3840x2160, the GPU is definitively the bottleneck. The 59.7 FPS Low result versus the 25.9 FPS Ultra result shows a 33.8 FPS spread, but more telling is that even Low cannot hit 60 FPS. The RX 7600’s 8 GB memory and 288.0 GB/s bandwidth are simply insufficient for 4K. The CPU, meanwhile, is unlikely to be a constraint at 4K, as the lower frame rates put less demand on the processor. The scaling between 1080p and 4K at Low settings — 141.4 FPS down to 59.7 FPS — shows a 57.8% reduction, which is roughly in line with the pixel count increase (1080p has about 2.07 million pixels, 4K has about 8.29 million, a 4x increase). This suggests the GPU is scaling almost linearly with resolution, confirming it as the primary limiter at higher resolutions.

Similar Performance Alternatives

The nearestRivals data for the CPU and GPU provides context for what other hardware would behave similarly in Rust. For the AMD Ryzen 5 9600X, the closest rivals are all within a 0.8% deltaPct of its average benchmark score of 29713. The AMD Ryzen 7 PRO 5755GE scores 29656 (0.2% higher), the AMD Ryzen 7 7840H scores 29868 (0.5% lower), the AMD Ryzen 7 5800XT scores 29879 (0.6% lower), and the AMD Ryzen 7 8845HS scores 29955 (0.8% lower). In practical terms, any of these CPUs would deliver nearly identical frame rates in Rust, with differences well under 1%.

For the AMD Radeon RX 7600, the nearest rivals show a wider spread in deltaPct. The NVIDIA GeForce RTX 3050 OEM scores 15199 (0.2% lower than the RX 7600’s 15171), the AMD Radeon Pro 560X scores 15082 (0.6% higher), the AMD Radeon 680M scores 15270 (0.7% lower), and the NVIDIA GeForce GTX 660 Ti scores 15063 (0.7% higher). The RX 7600’s avgBenchmarkScore is 15171, and its percentileVsAllGpus is 57, meaning it sits slightly above the median. The RTX 3050 OEM is the closest GPU rival, and would likely produce FPS numbers within 1% of the RX 7600 in Rust. The GTX 660 Ti, despite its older architecture, is within 0.7% in average score, though its driver support and feature set may differ.

It is important to note that these rival comparisons are based on aggregate benchmark scores, not direct Rust FPS measurements. However, given the small deltaPct values (all under 1%), the performance in Rust would be effectively indistinguishable. A system with any of these CPUs paired with the RX 7600 would show the same resolution scaling patterns described above. Similarly, a Ryzen 5 9600X paired with any of the rival GPUs would produce frame rates within a percentage point of the measured data.

The Verdict

Can this PC run Rust? The answer depends entirely on the target resolution. At 1920x1080, the answer is a definitive yes. The verdictByResolution data shows that all four settings presets — Low, Medium, High, and Ultra — are playable, with the best being Ultra at 62.5 FPS. This clears the 60 FPS threshold and provides a smooth experience even at the highest visual quality.

At 2560x1440, the answer is a conditional yes. The playable settings are Low (94.6 FPS) and Medium (61.4 FPS). The best playable setting is Medium, which just barely clears 60 FPS. High and Ultra are not playable, falling to 51.5 FPS and 41.8 FPS respectively. Players at 1440p will need to accept Medium settings for a playable experience, which is a notable compromise from the 1080p Ultra capability.

At 3840x2160, the answer is no. No settings preset reaches 60 FPS, with the best case being Low at 59.7 FPS — a 0.3 FPS shortfall. This is not a playable configuration for 4K Rust. The GPU’s 8 GB memory and 128-bit bus are the likely culprits, as the data shows a consistent inability to maintain frame rates at this resolution.

The overall combo rank is 2492 out of 3723 combinations, placing this system in the lower-middle portion of tested configurations. The 57th percentile GPU and 81st percentile CPU show a CPU-favorable balance, but Rust’s demands at higher resolutions expose the GPU’s limitations. The verdict is clear: this is a 1080p gaming rig for Rust, with 1440p playable only at Medium, and 4K off the table.

FAQ

Q: Can this system run Rust at 4K with any settings?

A: No. The best 4K result is Low settings at 59.7 FPS, which is 0.3 FPS below the 60 FPS playable threshold. The verdictByResolution data shows no playable settings at 3840x2160.

Q: What is the best settings preset for 1080p?

A: Ultra settings, with an average of 62.5 FPS. This is the highest preset available and it clears the 60 FPS threshold, making it the recommended choice for 1080p play.

Q: How does the RX 7600 compare to its nearest GPU rival in Rust?

A: The RX 7600’s nearest rival is the NVIDIA GeForce RTX 3050 OEM, which has a deltaPct of -0.2% in average benchmark score. In Rust, the frame rates would be within 1% of each other, meaning the RTX 3050 OEM would produce nearly identical FPS at all resolutions and settings.

Q: Is the CPU or GPU the bottleneck at 1440p?

A: The GPU is the bottleneck at 1440p. The data shows a 52.8 FPS spread between Low (94.6 FPS) and Ultra (41.8 FPS) at 2560x1440, and the GPU’s 57th percentile ranking versus the CPU’s 81st percentile indicates the GPU is the limiting factor.

Q: What is the playable threshold, and which resolutions meet it?

A: The playable threshold is 60 FPS. At 1920x1080, all presets meet it (Low 141.4, Medium 90.4, High 82.2, Ultra 62.5). At 2560x1440, only Low (94.6) and Medium (61.4) meet it. At 3840x2160, no preset meets it, with Low at 59.7 FPS being the closest.

Q: What is the combo rank of this CPU-GPU pairing for Rust?

A: This combination ranks 2492 out of 3723 tested combos for Rust, placing it in the lower-middle third of all configurations. This ranking reflects the fact that it excels at 1080p but struggles at 4K.