Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 62 | 74 | 110 |
| 1440p QHD | 80 | 106 | 125 | 187 |
| 1080p Full HD | 117 | 154 | 182 | 216 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 5070 Ti combination delivers a strong performance profile for Rust, with benchmark results showing that the system is capable of high frame rates across most settings and resolutions. The CPU, based on the Zen 4 architecture with 6 cores and 12 threads, posts a Cinebench R23 multicore score of 20851 and a Passmark multithread score of 24389, placing it in the 77th percentile of all CPUs. The GPU, built on the Blackwell 2.0 architecture with 8960 shading units and 16 GB of GDDR7 memory on a 256-bit bus, achieves a Passmark G3D score of 32974 and ranks in the 86th percentile of all GPUs. When paired together, this combo ranks 417th out of 3723 tested combinations for Rust, placing it in the top 11.2% of all systems evaluated.
Similar Performance Alternatives
The AMD Ryzen 5 8400F sits in a tightly clustered group of processors in terms of average benchmark scores. Its nearest rival is the AMD Ryzen 5 7500F, which scores 24964 on average, a mere 0.2% difference from the 8400F’s 25005 average. This places the two AMD chips at near-parity, meaning users upgrading between them would see negligible performance changes in CPU-bound scenarios. The Intel Core i7-11850H and Intel Core i7-13620H are also close, with average scores of 24935 and 24911 respectively, showing deltas of 0.3% and 0.4% from the 8400F. On the other side, the AMD EPYC 9474F scores 25103, which is 0.4% higher than the 8400F, indicating that even a server-class chip does not provide a meaningful advantage over this desktop processor in general workloads. For Rust specifically, where single-thread performance matters for game logic and physics calculations, the 8400F’s 3DMark single-thread score of 951 and Cinebench R23 single-core score of 2943 suggest it will handle the game’s CPU demands competently.
The NVIDIA GeForce RTX 5070 Ti is similarly surrounded by close competitors in the GPU benchmark landscape. Its average score of 49957 is nearly identical to the AMD Radeon RX Vega 64, which scores 50001, a difference of just 0.1%. The Intel Arc A550M trails slightly at 49737, representing a 0.4% gap. More notably, the AMD Radeon RX 6900 XT scores 50951, which is 2% higher, while the AMD Radeon RX 6800 XT scores 48477, putting it 3.1% lower. These deltas indicate that the RTX 5070 Ti delivers performance comparable to previous-generation high-end AMD cards, with the RX 6900 XT being the only nearby rival to show a meaningful lead. In Rust, where GPU load varies significantly with resolution and settings, this positioning means the 5070 Ti should handle demanding configurations well, though it may not be the absolute fastest option available.
FAQ
Q: What is the average frame rate for this system at 1920x1080 with Ultra settings?
A: The combination achieves an average of 117 FPS at 1920x1080 with Ultra settings, which is well above the 60 FPS playable threshold and represents the highest preset tested at this resolution.
Q: How does the CPU compare to its closest rival in synthetic benchmarks?
A: The Ryzen 5 8400F has an average benchmark score of 25005, which is just 0.2% higher than the AMD Ryzen 5 7500F’s score of 24964, indicating near-identical overall performance between the two processors.
Q: Is the RTX 5070 Ti significantly faster than the RX 6900 XT?
A: No, the data shows the opposite: the RX 6900 XT scores 50951 on average, which is 2% higher than the RTX 5070 Ti’s 49957, suggesting the AMD card holds a slight edge in general GPU benchmarks.
Q: What is the highest playable setting at 3840x2160?
A: At 4K resolution, the system can run High settings with an average of 62 FPS, which just clears the 60 FPS threshold. Ultra settings at this resolution drop to 47 FPS, which is not playable.
Q: How does this combo rank among all tested systems for Rust?
A: The combination ranks 417th out of 3723 tested combos, placing it in the top 11.2% of all configurations evaluated for this game.
Q: What is the minimum frame rate recorded in any tested configuration?
A: The lowest minimum FPS recorded is 63, which occurs at 3840x2160 with Medium settings, where the average is 74 FPS and the maximum is 85 FPS.
Measured FPS Breakdown
At 1920x1080, the system delivers its strongest performance across all settings. With Low settings, the average frame rate reaches 216 FPS, which is the highest recorded in any test configuration. Medium settings produce an average of 182 FPS, with a minimum of 155 FPS and a maximum of 209 FPS, showing a tight frame time distribution. High settings yield 154 FPS on average, while Ultra settings still maintain a solid 117 FPS. All of these configurations remain far above the 60 FPS playable threshold, indicating that this resolution is well within the system’s comfort zone, even for high-refresh-rate monitors.
Moving to 2560x1440, the performance remains strong but shows expected scaling penalties. Low settings produce 187 FPS on average, which is 29 FPS lower than at 1080p. Medium settings average 125 FPS, with a minimum of 106 FPS and a maximum of 144 FPS, demonstrating that the frame rate remains consistent under load. High settings achieve 106 FPS, while Ultra settings drop to 80 FPS. All four presets clear the 60 FPS threshold, and even the Ultra preset maintains a comfortable 20 FPS headroom above the playable minimum.
At 3840x2160, the system begins to show its limits. Low settings still deliver a highly playable 110 FPS average, suggesting that the GPU has substantial headroom when visual quality is reduced. Medium settings produce 74 FPS on average, with a minimum of 63 FPS and a maximum of 85 FPS, meaning the lowest frame rate recorded still exceeds the 60 FPS threshold, though barely. High settings average 62 FPS, which is just 2 FPS above the playable minimum. Ultra settings at 4K drop to 47 FPS on average, which falls below the 60 FPS threshold and is therefore not considered playable. The progression from Low to Ultra at this resolution shows a clear performance penalty of 63 FPS between the lowest and highest presets.
How This Combo Ranks
In the database of tested combinations for Rust, this pairing of the Ryzen 5 8400F and RTX 5070 Ti holds the 417th position out of 3723 total combos. This places the system in the top 11.2% of all tested configurations, indicating that it is a high-performing setup for this game. The ranking reflects a balance between the CPU’s 77th percentile standing among all processors and the GPU’s 86th percentile among all graphics cards, with the combination leveraging both components effectively. The data suggests that while the system is not in the absolute top tier, it outperforms the vast majority of tested hardware combinations, making it a robust choice for Rust enthusiasts. The proximity of the CPU and GPU to their respective rivals, with deltas of 0.2% to 0.4% for the CPU and 0.1% to 3.1% for the GPU, indicates that this combo’s rank is not the result of either component dramatically exceeding its peers, but rather a well-matched pairing that avoids significant bottlenecks.
The Verdict
This system can run Rust with playable performance at all tested resolutions, though the settings ceiling varies. At 3840x2160, the playable settings include High, Low, and Medium, with High being the best performing preset that clears the 60 FPS threshold, achieving an average of 62 FPS. Ultra at this resolution is not playable, as it drops to 47 FPS. At 2560x1440, all four settings presets are playable, with Ultra delivering an average of 80 FPS, which is the highest quality option that maintains playability. At 1920x1080, the system can run every preset above the threshold, with Ultra producing 117 FPS on average, making this the resolution where the full visual quality of Rust can be experienced without sacrificing frame rate. The verdict by resolution confirms that the system is most comfortable at 1440p and below, where even the most demanding settings remain well above the 60 FPS playable minimum.
Best Settings per Resolution
At 3840x2160, the most demanding preset that remains at or above 60 FPS is High, which achieves an average of 62 FPS. This provides a marginal 2 FPS cushion above the playable threshold, meaning that while the game is playable, there is limited headroom for demanding scenes. Medium settings at this resolution offer a more comfortable 74 FPS average, but High is the highest quality option that still qualifies as playable. For 2560x1440, Ultra settings are the best choice, delivering an average of 80 FPS. This provides a 20 FPS buffer above the threshold, allowing for consistent performance even during intense gameplay moments. At 1920x1080, Ultra settings again represent the optimal choice, with an average of 117 FPS. This configuration offers a substantial 57 FPS margin above the playable minimum, making it the recommended setup for users with high-refresh-rate displays who want maximum visual fidelity.
CPU and GPU Roles
The performance scaling across resolutions and presets reveals how the CPU and GPU contribute differently to Rust’s frame rate. At 1920x1080, the system achieves 216 FPS on Low settings and 117 FPS on Ultra, a difference of 99 FPS that is primarily driven by GPU load as the resolution increases. However, the CPU’s role becomes more apparent when comparing Low settings across resolutions: at 1080p Low the system hits 216 FPS, while at 1440p Low it reaches 187 FPS, and at 4K Low it drops to 110 FPS. This 106 FPS reduction from 1080p to 4K at the same settings indicates that the GPU is the dominant factor at lower quality presets, where the CPU can maintain high frame rates but the GPU becomes the limiting factor as pixel count rises. The CPU’s 3DMark max-threads score of 6165 and Passmark physics score of 1332 suggest it has sufficient headroom to feed the GPU at lower resolutions, but the data shows that the GPU’s workload scales more dramatically with resolution.
At higher presets, the GPU’s influence grows further. Comparing Medium settings, the system moves from 182 FPS at 1080p to 125 FPS at 1440p and 74 FPS at 4K, a 108 FPS drop across the resolution range. For Ultra settings, the same comparison shows 117 FPS at 1080p, 80 FPS at 1440p, and 47 FPS at 4K, a 70 FPS reduction. The smaller absolute drop at Ultra settings, despite the higher quality, suggests that the CPU begins to play a more significant role at the highest preset, as the frame rate is not solely determined by GPU pixel throughput. The minimum FPS data also supports this interpretation: at 1080p Medium, the minimum is 155 FPS, while at 1440p Medium it is 106 FPS, and at 4K Medium it is 63 FPS. These minimums show that the GPU’s ability to maintain consistent frame times degrades with resolution, while the CPU maintains its frame delivery rate. Overall, the GPU is the primary driver of performance differences across resolutions, with the CPU providing a stable foundation that allows the GPU to express its full capabilities at lower resolutions and presets.