Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 51 | 62 | 92 |
| 1440p QHD | 64 | 86 | 102 | 157 |
| 1080p Full HD | 97 | 128 | 148 | 217 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 8400F paired with the AMD Radeon RX 9070 XT delivers a wide range of performance in Rust, scaling from a highly fluid 1080p experience to a more demanding 4K situation. Benchmark data indicates that this combination is capable of clearing the 60 FPS threshold at every tested resolution, though the preset ceiling varies significantly. At 1920x1080, the system averages 216.7 FPS on Low settings, 147.5 FPS on Medium, 128.2 FPS on High, and 97 FPS on Ultra. Moving to 2560x1440, frame rates remain strong: 156.9 FPS on Low, 101.6 FPS on Medium, 85.5 FPS on High, and 64 FPS on Ultra. At 3840x2160, performance drops considerably, with the system producing 92.3 FPS on Low, 61.6 FPS on Medium, 51 FPS on High, and 36.6 FPS on Ultra.
Measured FPS Breakdown
The measured FPS data reveals a consistent pattern across the three resolutions, with the gap between Low and Ultra settings widening as pixel count increases. At 1920x1080, the difference between the lowest tested preset (Low at 216.7 FPS) and the highest (Ultra at 97 FPS) is 119.7 FPS, representing a 55.2% reduction in frame rate when moving to maximum quality. The scaling from Medium to High at this resolution is relatively moderate, with a drop from 147.5 FPS to 128.2 FPS, a 13.1% decrease. The jump from High to Ultra costs a further 31.2 FPS, landing at 97 FPS, which still comfortably exceeds the 60 FPS playable threshold.
At 2560x1440, the same settings hierarchy produces 156.9 FPS on Low, 101.6 FPS on Medium, 85.5 FPS on High, and 64 FPS on Ultra. The reduction from Low to Ultra here is 92.9 FPS, a 59.2% drop, which is slightly steeper than at 1080p. Notably, the transition from High to Ultra at 1440p results in a 21.5 FPS loss, bringing the system to just 4 FPS above the playable threshold. This makes Ultra the most demanding playable preset at this resolution, but with less headroom than the 1080p Ultra result.
The 3840x2160 results show the most pronounced impact of resolution scaling. Low settings yield 92.3 FPS, Medium drops to 61.6 FPS, High falls to 51 FPS, and Ultra bottoms out at 36.6 FPS. The difference between Low and Ultra here is 55.7 FPS, a 60.3% reduction. The critical boundary occurs between Medium and High: Medium stays above 60 FPS with a 1.6 FPS margin, while High falls 9 FPS short. This indicates that the GPU is the primary constraint at 4K, with the rendering load from higher presets exceeding what the RX 9070 XT can sustain at this resolution.
FAQ
Q: What is the maximum playable preset at 3840x2160 for this combination?
A: Medium is the most demanding preset that stays at or above 60 FPS at 4K, averaging 61.6 FPS. High settings drop below the threshold at 51 FPS, and Ultra falls to 36.6 FPS.
Q: Does this system maintain 60 FPS at 2560x1440 on Ultra settings?
A: Yes, the Ultra preset at 1440p averages 64 FPS, which clears the 60 FPS playable threshold by a margin of 4 FPS. This is the most demanding preset that remains playable at this resolution.
Q: How does the frame rate at 1920x1080 Low compare to 3840x2160 Ultra?
A: The 1080p Low result of 216.7 FPS is 180.1 FPS higher than the 4K Ultra result of 36.6 FPS. This represents a 5.9x difference in average frame rate between the most and least demanding tested configurations.
Q: What is the frame rate drop when moving from Medium to High at 3840x2160?
A: The drop is 10.6 FPS, from 61.6 FPS on Medium to 51 FPS on High. This 17.2% reduction pushes the system below the 60 FPS playable threshold.
Q: Which resolution shows the smallest relative difference between Low and Medium settings?
A: At 1920x1080, the difference between Low (216.7 FPS) and Medium (147.5 FPS) is 69.2 FPS, a 31.9% reduction. At 2560x1440, the drop is 55.3 FPS (35.2%), and at 3840x2160, the drop is 30.7 FPS (33.3%). The 1080p resolution shows the smallest relative drop.
Q: Can this system run Rust at 60 FPS on any preset at 3840x2160?
A: Yes, two presets are playable at 4K: Low at 92.3 FPS and Medium at 61.6 FPS. High and Ultra both fall below the 60 FPS threshold, with 51 FPS and 36.6 FPS respectively.
Best Settings per Resolution
For 1920x1080, the most demanding preset that remains at or above 60 FPS is Ultra, which averages 97 FPS. This provides a 37 FPS margin over the playable threshold, indicating substantial headroom for demanding scenes or future updates.
At 2560x1440, the best playable preset is also Ultra, with an average of 64 FPS. The margin here is only 4 FPS, making this configuration more sensitive to in-game variance. Players seeking a more stable experience could consider High at 85.5 FPS, which offers a 25.5 FPS buffer.
For 3840x2160, the best playable preset is Medium, averaging 61.6 FPS. This is a marginal result, sitting just 1.6 FPS above the threshold. The Low preset provides a more comfortable experience at 92.3 FPS, but Medium represents the highest quality setting that still clears 60 FPS.
The Verdict
This PC can run Rust at playable frame rates across all tested resolutions, but the quality ceiling varies. At 1920x1080, the system handles Ultra settings with ease, averaging 97 FPS, which is 37 FPS above the 60 FPS playable threshold. At 2560x1440, Ultra remains playable at 64 FPS, though the margin is narrow. The most demanding playable configuration is 1440p Ultra, which leaves only 4 FPS of headroom.
At 3840x2160, the verdict is more restrained. The system can run the game at Medium settings with an average of 61.6 FPS, just clearing the threshold. High and Ultra presets are not playable at this resolution, producing 51 FPS and 36.6 FPS respectively. The data indicates that the RX 9070 XT is the limiting factor at 4K, as the CPU's performance headroom visible at lower resolutions does not compensate for the GPU's rendering load at higher pixel counts.
For players prioritizing visual fidelity, 1440p Ultra is the practical ceiling for this combination. For those targeting 4K, Medium settings are the maximum playable option, and even that result carries risk of dropping below 60 FPS in heavy scenes given the slim 1.6 FPS margin.
Similar Performance Alternatives
The nearest rivals for the AMD Ryzen 5 8400F, based on average benchmark scores, include the AMD Ryzen 5 7500F with a delta of 0.2%, the Intel Core i7-11850H at 0.3%, and the Intel Core i7-13620H at 0.4%. These CPUs would behave nearly identically in Rust, as their average scores are within 0.4% of the 8400F's 25005 average. The AMD EPYC 9474F is 0.4% faster, which would yield negligible real-world differences in gaming frame rates.
For the GPU, the nearest rivals show a wider relative spread. The AMD Radeon HD 7770M is 0.1% slower, the NVIDIA GeForce GTX 570 is 0.2% slower, the NVIDIA P106-090 is 0.5% slower, and the AMD Radeon Pro 555 is 1% slower. These alternatives would produce nearly identical FPS numbers in Rust, though the RX 9070 XT's 55th percentile ranking among all GPUs suggests that most tested GPUs outperform it. The practical implication is that swapping the RX 9070 XT for any of these rivals would not meaningfully change the playable settings or frame rates observed in this analysis.
How This Combo Ranks
The combination of the Ryzen 5 8400F and RX 9070 XT ranks 921st out of 3723 tested combos in Rust, placing it in the 75.3rd percentile of all configurations. This rank reflects the system's ability to hit 60 FPS at all resolutions with at least Medium settings, but it also captures the GPU's limitation at 4K Ultra. The rank is influenced more by the GPU's 55th percentile standing among all GPUs than by the CPU's 77th percentile among all CPUs, suggesting that the graphics card is the bottleneck in this pairing.
Given the CPU's benchmark scores, including a Cinebench R23 multicore score of 20851 and a single-core score of 2943, the processor is clearly capable of feeding the GPU at lower resolutions. The 3DMark max-threads score of 6165 and Passmark multithread score of 24389 reinforce this. However, the combo's overall rank indicates that many other tested systems deliver higher frame rates, likely due to more powerful GPUs that can sustain higher presets at 4K.
CPU and GPU Roles
The data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the CPU's performance is sufficient to drive very high frame rates, with Low settings reaching 216.7 FPS. This suggests the GPU is not fully saturated at lower presets, allowing the CPU to push frames as fast as the renderer permits. The scaling from Low to Ultra at 1080p (a 55.2% reduction) is driven by GPU load, as higher presets increase pixel shading and texture work.
At 2560x1440, the GPU begins to assert more influence. The frame rates drop by roughly 27-28% across all settings compared to 1080p, which is consistent with the 1.78x increase in pixel count (from 2.07 million to 3.69 million pixels). The CPU still has headroom, as evidenced by the 156.9 FPS on Low settings, but the GPU's limits become apparent at Ultra, where the frame rate falls to 64 FPS.
The 3840x2160 results demonstrate that the GPU is the dominant constraint. The pixel count jumps to 8.29 million, a 2.25x increase over 1440p, and the frame rates at Low settings drop from 156.9 FPS to 92.3 FPS, a 41.2% reduction. The CPU's role diminishes further as the GPU becomes the bottleneck; the difference between Low and Ultra at 4K is 55.7 FPS, which is a narrower absolute gap than at 1440p (92.9 FPS) or 1080p (119.7 FPS). This indicates that at 4K, the GPU is saturated even at Low settings, and the CPU's contribution to frame rate variance is minimal.
The verdict is clear: at 1080p and 1440p, the RX 9070 XT has enough headroom to allow the Ryzen 5 8400F to express its full potential, but at 4K, the GPU's rendering capacity caps performance regardless of CPU capability. Players targeting 4K would see no benefit from a stronger CPU, while those at 1080p might see marginal gains from a faster GPU, though the current configuration already exceeds 200 FPS on Low settings.