Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

87%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
242 FPS
Ultra 1080p Measured
113 FPS

1440p (2K / QHD)

Low 1440p Measured
185 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
105 FPS
Ultra 4K Measured
46 FPS
6.7ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 27,636
Graphics Card
Required 28,194
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 62 75 105
1440p QHD 80 106 122 185
1080p Full HD 113 149 176 242

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 149
1920x1080 Low 242
1920x1080 Medium 176
1920x1080 Ultra 113
2560x1440 High 106
2560x1440 Low 185
2560x1440 Medium 122
2560x1440 Ultra 80
3840x2160 High 62
3840x2160 Low 105
3840x2160 Medium 75
3840x2160 Ultra 46

Performance Analysis: Rust on Your System

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 4070 Ti combination delivers a robust experience in Rust, with benchmark data showing strong performance across all tested resolutions. The pairing ranks 421st out of 3,723 tested combos in this game, placing it in the top ~11% of configurations. The data reveals that this system can handle Rust at high settings in 4K and at maximum settings in lower resolutions, though the most demanding presets will challenge it at higher pixel counts.

Similar Performance Alternatives

The CPU and GPU each have near-neighbor components that would produce very similar frame rates in Rust. For the AMD Ryzen 5 7600X, the benchmark data shows its average score of 27,636 is nearly identical to several alternatives. The AMD Ryzen 7 5700X scores 27,578, a mere 0.2% difference, making it effectively interchangeable in gaming workloads. The Intel Core i5-12600K also matches at 27,578, again with just a 0.2% delta. The AMD Ryzen 5 8500GE sits slightly higher at 27,712 (+0.3%), while the AMD Ryzen 7 5800 trails marginally at 27,535 (+0.4% slower). These four chips would all deliver statistically indistinguishable performance in Rust, meaning users upgrading from any of them would see no measurable frame rate difference.

On the GPU side, the RTX 4070 Ti's average benchmark score of 44,795 places it amid some unexpected rivals. The NVIDIA GeForce RTX 5090 Mobile scores 45,152, which is 0.8% higher, suggesting desktop and mobile parts are converging in raw compute for this title. The AMD Radeon Pro 5500 XT posts 45,384 (+1.3%), while the Intel Arc A730M reaches 45,592 (+1.7%). Only the NVIDIA RTX A6000 falls behind at 44,075, which is 1.6% lower. These delta values are all within ~2%, so in practical terms, any of these GPUs would produce nearly identical frame rates in Rust, though the RTX 4070 Ti's specific feature set and driver optimization for this game could shift real-world results slightly.

What these rival clusters imply is that the Ryzen 5 7600X + RTX 4070 Ti combo sits in a performance tier where small percentage differences in synthetic benchmarks translate to negligible FPS variations in actual gameplay. The 0.2-1.7% deltas are well within run-to-run variance for Rust's procedural world generation and complex simulation.

CPU and GPU Roles

The measured FPS data reveals how the balance between CPU and GPU shifts across resolutions. At 1920x1080, the system achieves 242.1 FPS on Low settings, but this drops to 113.2 FPS on Ultra — a 53% reduction that indicates the GPU is becoming the limiting factor as pixel shading demands increase. However, the CPU still plays a significant role at this resolution, as Rust's simulation and entity tracking require substantial single-thread performance. The Ryzen 5 7600X's strong single-core score of 1,960 in Cinebench R23 (single-core) and 4,135 in Passmark single-thread tests ensures the game logic doesn't bottleneck the frame pipeline.

At 2560x1440, the scaling pattern becomes clearer. Low settings yield 184.5 FPS, while Ultra drops to 79.5 FPS — a 57% reduction. This steeper decline compared to 1080p indicates the GPU is shouldering more of the load at higher pixel counts. The RTX 4070 Ti's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth become increasingly important here, as texture uploads and frame buffer operations grow with resolution.

The 3840x2160 results show the most dramatic GPU dependence. Low settings produce 104.8 FPS, Medium 74.5 FPS, High 61.8 FPS, and Ultra falls to 45.5 FPS — a 57% drop from Low to Ultra. This steep degradation suggests the GPU is heavily saturated at 4K, while the CPU has ample headroom. The Ryzen 5 7600X's 6 cores and 12 threads with 32 MB of L3 cache handle Rust's simulation comfortably, as evidenced by the relatively small FPS penalties when moving from 1440p to 4K at the same settings. For example, High settings drop from 105.5 FPS at 1440p to 61.8 FPS at 4K, a 41% reduction that primarily reflects the GPU's rendering load rather than CPU limitations.

Measured FPS Breakdown

At 1920x1080, the system delivers exceptional performance across all settings. Low settings average 242.1 FPS, making this combination capable of driving high-refresh-rate monitors well beyond 144Hz. Medium settings still produce 176.0 FPS, High reaches 148.5 FPS, and even Ultra maintains 113.2 FPS. All four presets clear the 60 FPS playable threshold by a wide margin, with the minimum being nearly double the target.

At 2560x1440, performance remains strong but the scaling begins to show. Low settings average 184.5 FPS, Medium 122.0 FPS, High 105.5 FPS, and Ultra 79.5 FPS. The jump from Low to Medium costs 62.5 FPS (34% reduction), while going from High to Ultra costs 26 FPS (25% reduction). Every preset still comfortably exceeds 60 FPS, with Ultra providing a 32% buffer above the threshold.

At 3840x2160, the limits of this combination become visible. Low settings average 104.8 FPS, Medium 74.5 FPS, and High 61.8 FPS — just barely above the 60 FPS target. Ultra drops to 45.5 FPS, which falls below the playable threshold. The gradient from Low to Ultra is steep: each step reduces performance by roughly 20-30 FPS, reflecting the GPU's struggle with 8.3 million pixels per frame. The gap between Medium and High is 12.7 FPS, while High to Ultra costs 16.3 FPS, showing that the most demanding preset demands significantly more GPU throughput.

FAQ

Q: Can this system run Rust at 4K with all settings maxed?

A: No. At 3840x2160 with Ultra settings, the average FPS is 45.5, which falls below the 60 FPS playable threshold. The verdict data lists only High, Low, and Medium as playable at 4K.

Q: What is the best preset for 1440p gaming?

A: Ultra settings at 2560x1440 produce an average of 79.5 FPS, which is the highest preset that remains above 60 FPS. This provides a 32% margin above the threshold, allowing for some frame drops without hitting stutter territory.

Q: How does the system perform at 1080p for competitive play?

A: At 1920x1080 with Low settings, the average FPS is 242.1, which is ideal for high-refresh-rate monitors. Even at Ultra settings, the system maintains 113.2 FPS, so competitive players can choose between maximum visual fidelity and maximum frame rate.

Q: What is the performance difference between High and Ultra at 4K?

A: High settings at 3840x2160 average 61.8 FPS, while Ultra drops to 45.5 FPS — a difference of 16.3 FPS (26% reduction). This makes High the highest playable preset at 4K, with Ultra being unplayable.

Q: Which component is the bottleneck at 4K Ultra?

A: The GPU is the primary limiter at 3840x2160 Ultra. The RTX 4070 Ti's 12 GB VRAM and 40.09 TFLOPS FP32 compute are insufficient for Rust's Ultra preset at this resolution, while the CPU's strong single-thread performance (1,960 in Cinebench R23 single-core) provides adequate headroom.

Q: Is this combo better suited for 1440p or 1080p?

A: The data shows excellent performance at both resolutions, but 1440p Ultra (79.5 FPS) offers a better balance of visual quality and frame rate than 1080p Ultra (113.2 FPS). The 1080p results are more useful for competitive play where maximizing FPS matters more than visual fidelity.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 113.2 FPS. This gives players the full visual experience with a 53.2 FPS buffer above the threshold. The RTX 4070 Ti's 12 GB VRAM and 504.2 GB/s bandwidth are sufficient for all textures and effects at this resolution.

At 2560x1440, Ultra is also the best choice, averaging 79.5 FPS. This provides a 19.5 FPS margin above the playable threshold, which should absorb most scene complexity spikes in Rust's dynamic world. The 79.5 FPS average suggests occasional dips into the high-60s during intense firefights or large base raids, but the overall experience remains smooth.

At 3840x2160, the best playable preset is High, averaging 61.8 FPS. This is only 1.8 FPS above the threshold, leaving minimal headroom for demanding scenes. Players at 4K may want to consider Medium (74.5 FPS) for a more comfortable buffer, but High is technically playable per the data. The 45.5 FPS Ultra result confirms that maxing out settings at 4K is not viable with this hardware.

How This Combo Ranks

The combination of AMD Ryzen 5 7600X and NVIDIA GeForce RTX 4070 Ti ranks 421st out of 3,723 tested combos in Rust, placing it in the 88.7th percentile of all configurations. This top-12% ranking reflects the system's ability to deliver playable frame rates at all resolutions up to 4K High, with particularly strong performance at 1080p and 1440p. The rank suggests that while this is not an extreme high-end setup, it outperforms the vast majority of systems tested for this game.

The ranking makes sense given the component benchmarks: the CPU's 79th percentile among all CPUs and the GPU's 84th percentile among all GPUs combine to produce a system that excels in most scenarios but falls short of the absolute top tier. The 421st rank indicates that roughly 420 other combinations achieve higher average FPS in Rust, likely featuring more powerful GPUs like the RTX 4090 or RX 7900 XTX, but the Ryzen 5 7600X's strong single-thread performance keeps it competitive in this CPU-sensitive title.

The Verdict

This PC can absolutely run Rust, with playable performance at every resolution tested. At 1920x1080, all four presets (Low 242.1 FPS, Medium 176.0 FPS, High 148.5 FPS, Ultra 113.2 FPS) clear the 60 FPS threshold, making this an excellent choice for both competitive and casual play. At 2560x1440, all presets also remain playable, with Ultra achieving 79.5 FPS — enough for a smooth experience on high-refresh-rate monitors. At 3840x2160, the system handles Low (104.8 FPS), Medium (74.5 FPS), and High (61.8 FPS) settings, but Ultra drops to 45.5 FPS, which is below the 60 FPS target.

The verdict data specifically lists High as the best playable setting at 4K with 61.8 FPS average, but this leaves minimal headroom. For the most stable 4K experience, Medium at 74.5 FPS offers a safer margin while still delivering good visual quality. Overall, this combination is a strong performer for Rust, capable of high-refresh-rate gaming at 1080p and 1440p, with acceptable 4K performance at reduced settings. The Ryzen 5 7600X's 6 cores and 12 threads prove sufficient for Rust's simulation demands, while the RTX 4070 Ti's 40.09 TFLOPS of compute power handles modern graphical effects at all but the most demanding 4K preset.