Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

85%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
227 FPS
Ultra 1080p Measured
107 FPS

1440p (2K / QHD)

Low 1440p Measured
165 FPS
Ultra 1440p Measured
75 FPS

4K (Ultra HD)

Low 4K Measured
102 FPS
Ultra 4K Measured
46 FPS
7.1ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 26,324
Graphics Card
Required 28,194
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 53 64 102
1440p QHD 75 94 112 165
1080p Full HD 107 140 162 227

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 140
1920x1080 Low 227
1920x1080 Medium 162
1920x1080 Ultra 107
2560x1440 High 94
2560x1440 Low 165
2560x1440 Medium 112
2560x1440 Ultra 75
3840x2160 High 53
3840x2160 Low 102
3840x2160 Medium 64
3840x2160 Ultra 46

Performance Analysis: Rust on Your System

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 5070 delivers a deeply capable Rust experience, but the data reveals a clear ceiling at 4K. At 3840x2160, the combination averages 45.7 FPS on Ultra settings, which falls below the 60 FPS playability threshold. Dropping to Medium settings raises the average to 63.5 FPS, while Low settings hit 101.6 FPS. The 1440p and 1080p results are uniformly positive, with every preset clearing 60 FPS. Benchmark results indicate this combo is best suited for high-refresh 1440p gaming or maxed-out 1080p, with 4K requiring a settings compromise.

Measured FPS Breakdown

The measured FPS data shows a predictable scaling pattern across resolutions, with the RTX 5070's 12 GB GDDR7 memory and 672.0 GB/s bandwidth handling Rust's demanding draw distances. At 3840x2160, the averages range from 45.7 FPS on Ultra to 101.6 FPS on Low. The Medium preset lands at 63.5 FPS, while High sits at 53.4 FPS. The gap between Low and Ultra at 4K is 55.9 FPS, indicating that the GPU's 30.87 TFLOPS FP32 throughput is the limiting factor at this resolution.

Moving to 2560x1440, the picture improves substantially. Low settings produce 164.6 FPS, Medium reaches 112.3 FPS, High achieves 94.2 FPS, and Ultra still delivers 74.8 FPS. The spread between Low and Ultra narrows to 89.8 FPS, but every preset comfortably exceeds the 60 FPS threshold. This resolution appears to be the sweet spot for this hardware, as the 6-core Ryzen 5 7600 with its 32 MB L3 cache and the RTX 5070 balance load more evenly.

At 1920x1080, the combo shows its full strength. Low settings hit 227.4 FPS, Medium reaches 162.1 FPS, High manages 139.8 FPS, and Ultra holds 107.1 FPS. The delta between Low and Ultra is 120.3 FPS, which suggests that even at the highest preset, the system has ample headroom. The 1080p results indicate that the CPU's single-thread performance, reflected in its 1852 Cinebench R23 single-core score, is sufficient to feed the GPU's 201.0 GPixel/s pixel rate without bottlenecking.

Notably, the data does not include min or max FPS values, so the analysis relies solely on average FPS. The absence of frame-time variance data means the verdict is based on sustained averages rather than 1% lows, which could matter for a survival game like Rust where sudden combat or base raids can cause stutters.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which averages 63.5 FPS. This is a narrow margin above the 60 FPS threshold, so players seeking more visual fidelity would need to accept the 53.4 FPS average of High settings. Low settings at 101.6 FPS provide the smoothest 4K experience but sacrifice significant graphical quality.

For 2560x1440, the best settings are Ultra, which averages 74.8 FPS. This is the highest preset available, and it still clears the 60 FPS threshold by 14.8 FPS. The data shows that all four presets—Low at 164.6 FPS, Medium at 112.3 FPS, High at 94.2 FPS, and Ultra at 74.8 FPS—are playable, making 1440p the resolution where this combo can run Rust at full visual settings without compromise.

At 1920x1080, Ultra is again the best setting, averaging 107.1 FPS. This is 47.1 FPS above the playability threshold, and the 227.4 FPS Low result shows the system can push well beyond 144 Hz monitors if desired. The 1080p Ultra result is particularly strong given that Rust's procedural maps and dynamic lighting typically tax GPU memory bandwidth, and the RTX 5070's 12 GB GDDR7 at 28 Gbps effective appears sufficient.

CPU and GPU Roles

The scaling between resolutions and presets reveals a clear division of labor. At 1920x1080, the CPU plays a more prominent role, as evidenced by the 227.4 FPS Low result. The Ryzen 5 7600's 3.80 GHz base clock and 5.10 GHz boost clock, combined with its 12 threads, allow it to keep up with the GPU's output at lower resolutions where pixel fill rate is less demanding. The CPU's 78th percentile ranking among all CPUs, based on its 26324 average benchmark score, suggests it is a solid mid-range performer.

At 2560x1440, the GPU begins to assert dominance. The drop from 164.6 FPS at Low to 74.8 FPS at Ultra represents a 54.5% reduction, which is steeper than the 1080p drop from 227.4 FPS to 107.1 FPS (52.9%). This indicates that the RTX 5070's shading units and TMUs are becoming the limiting factor as resolution increases. The GPU's 482.3 GTexel/s texture rate and 80 ROPs are well-matched for this resolution, but the 4K results confirm the GPU's workload is the primary constraint there.

At 3840x2160, the GPU is unequivocally the bottleneck. The Ultra preset's 45.7 FPS is below the CPU's capability, as the processor's 12735 Cinebench R23 multicore score shows ample headroom. The 4K results show a 55.9 FPS spread between Low and Ultra, which is larger than the 120.3 FPS spread at 1080p in absolute terms but smaller proportionally. This suggests that at 4K, the GPU's 30.87 TFLOPS FP32 performance is the deciding factor, and the CPU's role diminishes to feeding draw calls and physics calculations.

The data also shows that Rust is not particularly sensitive to CPU thread count at higher resolutions. The Ryzen 5 7600's 6 cores and 12 threads are sufficient, as the 4K scaling from Low to Ultra follows a GPU-bound pattern. Players with this combo should prioritize GPU settings at 4K, while at 1080p, they could theoretically push higher frame rates if the CPU were stronger, but the 227.4 FPS Low result indicates no practical bottleneck.

Similar Performance Alternatives

For the CPU, the nearest rivals based on average benchmark scores are all within 0.5% of the Ryzen 5 7600's 26324 average score. The AMD Ryzen 7 7435HS scores 26402, a 0.3% advantage, while the AMD Ryzen 9 6900HX scores 26274, a 0.2% deficit. The Intel Core i9-11900KF at 26212 is 0.4% behind, and the AMD Ryzen 5 8540U at 26187 is 0.5% behind. These CPUs would deliver nearly identical Rust performance, though the Ryzen 7 7435HS and Ryzen 9 6900HX are mobile parts, which may have different thermal and power characteristics in practice.

For the GPU, the nearest rivals show a wider delta range. The AMD Radeon Pro 580 scores 40318, just 0.1% behind the RTX 5070's 40377 average. The AMD Radeon Pro WX 7100 at 40063 is 0.8% behind, while the AMD Radeon Pro 5300 at 40870 is 1.2% ahead. The NVIDIA RTX A500 Mobile at 39568 is 2% behind. These are all professional or mobile GPUs, which means their real-world gaming performance may differ from the desktop RTX 5070, but the benchmark scores suggest they would produce similar FPS in Rust at the same settings.

The practical implication is that if a user had one of these rival GPUs instead of the RTX 5070, the measured FPS would be within a few frames per second. For example, the Radeon Pro 5300's 1.2% higher score would push the 4K Medium result from 63.5 FPS to approximately 64.3 FPS, while the RTX A500 Mobile's 2% lower score would drop the 1440p Ultra result from 74.8 FPS to approximately 73.3 FPS. These differences are negligible in gameplay terms.

The Verdict

This PC can run Rust, but the playable settings vary by resolution. At 3840x2160, the verdict is conditional: Low settings at 101.6 FPS and Medium at 63.5 FPS are playable, while High at 53.4 FPS and Ultra at 45.7 FPS are not. The best 4K experience is Medium, which averages 63.5 FPS, barely clearing the 60 FPS threshold. Players who prefer visual quality over frame rate would have to settle for High at 53.4 FPS, which is below the playability standard.

At 2560x1440, the verdict is unambiguous: all four presets are playable. Ultra averages 74.8 FPS, which is 14.8 FPS above the threshold, and the lower presets offer increasingly higher frame rates up to 164.6 FPS at Low. This is the resolution where the combo shines, offering both high visual fidelity and smooth performance. The 1440p Ultra result is the recommended target for this hardware.

At 1920x1080, the verdict is equally strong. Ultra averages 107.1 FPS, nearly double the playability threshold, and even the most demanding preset leaves substantial headroom. The 1080p results show this combo is overkill for standard monitors, making it suitable for 144 Hz or 165 Hz displays. The 227.4 FPS Low result confirms the system can handle esports-level frame rates if needed, though Rust's gameplay benefits more from the visual detail of Ultra.

Overall, the data indicates this PC is a strong Rust performer for 1080p and 1440p gaming, with 4K requiring a settings compromise. The 60 FPS threshold is met at 4K only on Medium and below, so players with 4K displays should expect to dial back settings or accept lower frame rates on higher presets.

How This Combo Ranks

Among tested combinations, this pairing ranks 653rd out of 3723 combos, placing it in the top 17.5% of all tested configurations for Rust. This percentile positioning reflects the RTX 5070's 82nd percentile ranking among all GPUs, based on its 40377 average benchmark score, combined with the Ryzen 5 7600's 78th percentile CPU ranking. The combo's rank suggests it outperforms the majority of systems tested in this game, which is consistent with the measured FPS results showing 60+ FPS at 1440p Ultra and 1080p Ultra.

The rank of 653 out of 3723 indicates there are 652 tested combos that perform better in Rust, likely featuring higher-tier GPUs like the RTX 5080 or 5090, or CPUs with stronger single-thread performance. However, the 653rd rank also means this combo sits above 3070 other tested configurations, which is a solid position for a mid-range CPU paired with a current-generation GPU. The data shows the combo's strength is consistency: it delivers playable frame rates across all resolutions, with only the 4K Ultra preset falling below the threshold.

The rank also contextualizes the 4K limitation. While the combo is not a top-100 performer, its 653rd position out of 3723 is respectable, and the measured FPS confirms it can handle Rust's demanding survival gameplay. For players targeting 1440p or 1080p, this rank understates the practical experience, as the combo's performance at those resolutions is far above the 60 FPS minimum. The 4K results are the only area where the rank reflects a compromise, and even then, Medium settings provide a playable experience.