Rust

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5090 delivers a wide range of frame rates in Rust, scaling predictably with resolution and preset level. Across all tested configurations, the combo consistently exceeds the 60 FPS playable threshold, with the lowest recorded average being 59.7 FPS at 4K Ultra. This places the pairing in the 101st position out of 3,723 tested combinations, indicating strong overall performance for this specific title.

Measured FPS Breakdown

At 1920x1080, the combination produces exceptional frame rates that leave substantial headroom for high-refresh-rate displays. The Low preset reaches an average of 222.4 FPS, which is the highest figure recorded across the entire test suite. Moving to Medium, the average drops to 193.1 FPS, while the High preset maintains 183.5 FPS. The most demanding option, Ultra, still delivers a robust 142.8 FPS average. The progression from Low to Ultra at this resolution shows a performance cost of approximately 36% when comparing the lowest to highest preset.

At 2560x1440, the frame rates remain very high but begin to show the increased rendering load. The Low preset produces a 201.1 FPS average, which is only a modest reduction from the 1080p result. Medium follows at 152.7 FPS, and High comes in at 127.7 FPS. The Ultra preset still clears the 60 FPS threshold comfortably with a 96.2 FPS average. The step from Low to Ultra at this resolution represents a reduction of roughly 52% in average frame rate, showing that the Ultra preset carries a significant performance penalty.

At 3840x2160, the rendering demands become substantial, yet the RTX 5090 continues to deliver playable results. The Low preset achieves a 132.5 FPS average, which is still far above the playable threshold. Medium produces 87.9 FPS, and High delivers 76.6 FPS. The Ultra preset is the only configuration that dips below 60 FPS, with an average of 59.7 FPS. The scaling from Low to Ultra at 4K shows a performance drop of about 55%, demonstrating that the highest quality settings are particularly demanding at this resolution across all tested presets.

Best Settings per Resolution

For 1920x1080, the Ultra preset is the best choice since it maintains a 142.8 FPS average while providing the highest visual quality. This is well above the 60 FPS threshold, leaving ample room for frame rate fluctuations during intense gameplay moments.

At 2560x1440, the Ultra preset remains viable with a 96.2 FPS average. This configuration offers the full visual experience while still maintaining a comfortable margin above the playable threshold. The data indicates that even the most demanding settings at this resolution do not compromise the experience.

For 3840x2160, the High preset is the optimal selection, delivering a 76.6 FPS average. While the Ultra preset technically falls just short at 59.7 FPS, the High preset provides a smoother experience with a significant margin above 60 FPS. The Medium preset also remains playable at 87.9 FPS, but High offers superior visual quality without requiring a substantial frame rate sacrifice.

Similar Performance Alternatives

Looking at the CPU benchmarks, the Ryzen 5 7500F scores an average of 24,964 across all tests, placing it in the 77th percentile of all CPUs. Its closest rival is the AMD Ryzen 5 8400F with an average score of 25,005, which is 0.2% higher. The Intel Core i7-11850H scores 24,935, just 0.1% lower, while the Intel Core i7-13620H achieves 24,911, a 0.2% deficit. The Intel Core 5 210H trails by 0.4% with a score of 24,872. These results indicate that systems built around any of these processors would deliver nearly identical CPU-bound performance in Rust.

On the GPU side, the RTX 5090 achieves an average benchmark score of 79,842, placing it in the 92nd percentile of all GPUs. Its nearest rival is the NVIDIA Tesla P100 PCIe 16 GB with a score of 79,605, which is 0.3% lower. The Tesla P100 PCIe 12 GB scores 79,396, a 0.6% deficit, while the AMD Radeon RX 6850M XT reaches 78,940, which is 1.1% lower. The AMD Radeon Pro Vega 64X actually scores higher at 80,959, representing a 1.4% advantage. These figures suggest that GPU performance in this class is tightly clustered, with the RTX 5090 sitting near the top of a narrow band.

The Verdict

This PC can absolutely run Rust across all tested resolutions and settings. The benchmark data shows that every configuration except one clears the 60 FPS playable threshold. At 1920x1080, all four presets deliver frame rates from 142.8 FPS at Ultra to 222.4 FPS at Low, providing an exceptionally smooth experience. At 2560x1440, the Ultra preset maintains a 96.2 FPS average, with all settings remaining well above 60 FPS.

At 3840x2160, the High preset is the recommended choice, delivering a 76.6 FPS average. The Ultra preset falls just short of the playable threshold at 59.7 FPS, which means it may be usable for some players but does not consistently meet the 60 FPS standard. The Low and Medium presets at 4K both perform admirably, with 132.5 FPS and 87.9 FPS averages respectively. Overall, this combination provides playable performance in nearly every scenario, with only the most demanding 4K Ultra setting falling marginally below the target.

FAQ

Q: Can this system run Rust at 4K resolution?

A: Yes, at 3840x2160 the High preset achieves a 76.6 FPS average, while Medium delivers 87.9 FPS and Low reaches 132.5 FPS. Only the Ultra preset falls below 60 FPS at 59.7 FPS.

Q: What is the best preset for 1440p gaming?

A: The Ultra preset at 2560x1440 produces a 96.2 FPS average, making it the most demanding setting that still comfortably clears the 60 FPS threshold.

Q: How does the CPU compare to its nearest competitors?

A: The Ryzen 5 7500F scores 24,964 on average, which is 0.1% higher than the Intel Core i7-11850H and 0.2% lower than the AMD Ryzen 5 8400F. Performance differences among these rivals are minimal.

Q: Is the RTX 5090 significantly faster than its closest GPU rivals?

A: The RTX 5090 scores 79,842, which is 0.3% higher than the Tesla P100 PCIe 16 GB and 1.1% higher than the Radeon RX 6850M XT. However, the Radeon Pro Vega 64X scores 1.4% higher.

Q: What frame rate can I expect at 1080p with High settings?

A: At 1920x1080 with the High preset, the average frame rate is 183.5 FPS, with Ultra delivering 142.8 FPS and Low reaching 222.4 FPS.

Q: Does the system maintain 60 FPS at 4K Ultra?

A: No, the 3840x2160 Ultra preset produces a 59.7 FPS average, which falls just below the 60 FPS playable threshold. The High preset at 76.6 FPS is the recommended alternative.

How This Combo Ranks

This specific combination of AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 ranks 101st out of 3,723 tested combinations in Rust. This places the pairing in the top 3% of all tested systems, indicating that it delivers performance well above the median. The ranking reflects the GPU's strong position in the 92nd percentile of all GPUs and the CPU's solid 77th percentile standing. The high rank suggests that this configuration is particularly well-suited for Rust, with the powerful GPU compensating for the mid-range CPU to achieve excellent overall results.

The ranking also highlights that while the CPU is not a top-tier performer, it does not bottleneck the system in this game. The combination of a capable six-core processor with a flagship GPU produces results that compete with systems using more expensive processors. This suggests that Rust benefits more from GPU horsepower than from extreme CPU multithreading capabilities.

CPU and GPU Roles

The performance scaling across resolutions reveals how the CPU and GPU divide responsibilities in Rust. At 1920x1080, the frame rates are exceptionally high, with the Low preset reaching 222.4 FPS and Ultra still delivering 142.8 FPS. The relatively small gap between Low and Ultra at this resolution suggests that the CPU is capable of feeding frames quickly enough to keep the GPU busy, even at lower graphical settings.

At 2560x1440, the frame rates decrease across all presets, but the pattern changes. The Low preset drops to 201.1 FPS, while Ultra falls to 96.2 FPS. The larger performance gap between presets at this resolution indicates that the GPU begins to take on a more significant role as the pixel count increases. The CPU still provides sufficient throughput, but the rendering load becomes more demanding.

At 3840x2160, the GPU becomes the dominant factor. The Low preset still produces 132.5 FPS, but the Ultra preset drops to 59.7 FPS. The 55% performance difference between Low and Ultra at 4K, compared to the 36% difference at 1080p, clearly demonstrates that the GPU is the primary constraint at higher resolutions. The CPU's role diminishes as the resolution increases, with the RTX 5090's raw rendering power determining the final frame rates. The data indicates that for players targeting 4K, the GPU choice matters significantly more than the CPU, while at 1080p the CPU has enough headroom to support very high frame rates.