Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
212 FPS
Ultra 1080p Measured
91 FPS

1440p (2K / QHD)

Low 1440p Measured
146 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
86 FPS
Ultra 4K Measured
37 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 24,964
Graphics Card
Required 28,194
Your GPU 23,877

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 49 58 86
1440p QHD 63 83 98 146
1080p Full HD 91 120 142 212

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 120
1920x1080 Low 212
1920x1080 Medium 142
1920x1080 Ultra 91
2560x1440 High 83
2560x1440 Low 146
2560x1440 Medium 98
2560x1440 Ultra 63
3840x2160 High 49
3840x2160 Low 86
3840x2160 Medium 58
3840x2160 Ultra 37

Performance Analysis: Rust on Your System

The AMD Ryzen 5 7500F and AMD Radeon RX 9070 combination delivers a broad range of performance in Rust, with results that vary dramatically depending on resolution and quality preset. This pairing sits in the upper-middle tier of tested hardware, and the measured data shows that its behavior in Rust is defined by a clear split: at 1080p the system is overwhelmingly CPU-bound, while at 4K the GPU becomes the dominant constraint. The following analysis breaks down how this combo performs, where it stands among other tested configurations, and what settings deliver a smooth experience.

Similar Performance Alternatives

The CPU and GPU in this system each have close rivals based on aggregate benchmark scores, which helps contextualize where this hardware sits in the broader landscape. For the AMD Ryzen 5 7500F, the average benchmark score is 24964, placing it at the 77th percentile of all CPUs. Its nearest rival is the Intel Core i7-11850H, which scores 24935, a delta of just 0.1 percent — these two processors are effectively indistinguishable in overall compute performance. The AMD Ryzen 5 8400F scores 25005, which is 0.2 percent higher, while the Intel Core i7-13620H scores 24911 (0.2 percent lower) and the Intel Core 5 210H scores 24872 (0.4 percent lower). What this means for Rust is that any of these CPUs would likely produce very similar frame rates in CPU-limited scenarios, since their aggregate compute scores are within a fraction of a percent of each other.

On the GPU side, the AMD Radeon RX 9070 achieves an average benchmark score of 23877, landing at the 69th percentile of all GPUs. Its nearest listed rival is the NVIDIA GeForce GTX TITAN Z, which scores 23736, a delta of 0.6 percent. The AMD Radeon RX 6800S scores 24063, which is 0.8 percent higher, while the NVIDIA GeForce RTX 3080 Mobile scores 23628 (1.1 percent lower) and the NVIDIA GeForce RTX 2080 SUPER scores 24170 (1.2 percent higher). In practical terms, these GPU rivals would deliver nearly identical rasterization performance in Rust, though the RX 9070 has a substantial 16 GB memory buffer and RDNA 4.0 architecture, which the benchmark scores alone do not fully capture. Still, the data indicates that a system with an RTX 2080 SUPER or RX 6800S would be within a couple of percent of this RX 9070 in overall GPU compute.

For Rust specifically, the similarity of these rivals matters most at 4K, where the GPU is the primary bottleneck. At 1080p, the CPU comparisons are more relevant, and the Ryzen 5 7500F’s closeness to the Core i7-13620H suggests that users with either processor would see nearly identical frame rates in CPU-bound scenarios. The data also shows that the Ryzen 5 7500F’s 6 cores and 12 threads are sufficient to push the RX 9070 to high frame rates at lower resolutions, as evidenced by the 212 FPS average at 1080p Low settings. In short, anyone considering this combo should expect performance that is representative of a mid-to-high-end 2023-era CPU paired with a strong 2025 GPU, with rivals from both the NVIDIA and AMD camps offering similar aggregate results.

How This Combo Ranks

Among the 3723 tested combinations of CPUs and GPUs in Rust, this specific pairing of the AMD Ryzen 5 7500F and AMD Radeon RX 9070 ranks 1068th. That places it in the 71st percentile of all tested combos — a solidly above-average position, but not near the top of the leaderboard. The rank reflects the aggregate performance across all resolutions and settings measured, which includes the 4K Ultra result of just 37 FPS and the 1080p Low result of 212 FPS. Because Rust is a survival game with heavy CPU simulation demands, the combo’s rank is likely held back by the CPU’s position at the 77th percentile rather than the GPU’s 69th percentile, since the GPU is more than capable of high frame rates at lower resolutions.

The rank of 1068 out of 3723 means that roughly 28 percent of tested combos outperform this pairing in Rust. That is a meaningful data point, but it should be interpreted with caution: the rank is an average across all settings, so it includes scenarios where the CPU is the limiter (1080p) and scenarios where the GPU is the limiter (4K). In practice, a user playing at 1080p with High settings will experience performance that feels much stronger than the rank suggests, because the 120 FPS average at that configuration is well above the 60 FPS playable threshold. Conversely, at 4K Ultra, the 37 FPS result is far below playable, which drags the overall rank down. The data shows that this combo is best suited for 1080p and 1440p gaming, where it ranks much higher in real-world usability than the aggregate number implies.

Measured FPS Breakdown

The measured frame rates for this combo in Rust are as follows, organized by resolution and settings preset. At 3840x2160 (4K), the Low preset averages 86 FPS, with no min or max values recorded. The Medium preset averages 58 FPS, with a minimum of 49 and a maximum of 67. The High preset averages 49 FPS, and the Ultra preset averages 37 FPS. This shows a steep drop-off as settings increase: from Low to Medium is a 28 FPS decline (86 to 58), and from Medium to Ultra is another 21 FPS decline (58 to 37). The gap between Low and Ultra at 4K is 49 FPS, meaning the Ultra preset delivers less than half the frame rate of Low.

At 2560x1440 (1440p), the Low preset averages 146 FPS, with no min or max values recorded. The Medium preset averages 98 FPS, with a minimum of 83 and a maximum of 113. The High preset averages 83 FPS, and the Ultra preset averages 63 FPS. The scaling here is smoother than at 4K: Low to Medium drops by 48 FPS, Medium to High drops by 15 FPS, and High to Ultra drops by 20 FPS. The total range from Low to Ultra is 83 FPS, but notably, even the Ultra preset at 1440p stays above the 60 FPS playable threshold with a 63 FPS average.

At 1920x1080 (1080p), the Low preset averages 212 FPS, with no min or max values recorded. The Medium preset averages 142 FPS, with a minimum of 121 and a maximum of 164. The High preset averages 120 FPS, and the Ultra preset averages 91 FPS. The scaling from Low to Medium is a 70 FPS drop, which is the largest single-step decline across all resolutions. From Medium to High is a 22 FPS drop, and from High to Ultra is a 29 FPS drop. The total range from Low to Ultra is 121 FPS, yet even the Ultra preset at 1080p delivers 91 FPS, which is well above the playable threshold.

The min/max data recorded only for the Medium preset at each resolution provides additional insight into frame time consistency. At 4K Medium, the range is 49 to 67 FPS, a spread of 18 FPS. At 1440p Medium, the range is 83 to 113 FPS, a spread of 30 FPS. At 1080p Medium, the range is 121 to 164 FPS, a spread of 43 FPS. The wider spread at lower resolutions suggests that the CPU is causing more variance in frame times, which is consistent with Rust’s simulation-heavy workload.

The Verdict

Can this PC run Rust? The data shows a clear yes, but with important caveats based on resolution and settings. The playable threshold is defined as 60 FPS average, and the verdict by resolution is as follows. At 3840x2160, only the Low preset is playable, with an average of 86 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 58, 49, and 37 FPS respectively. At 2560x1440, all four presets are playable: Low averages 146 FPS, Medium averages 98 FPS, High averages 83 FPS, and Ultra averages 63 FPS. At 1920x1080, all four presets are also playable: Low averages 212 FPS, Medium averages 142 FPS, High averages 120 FPS, and Ultra averages 91 FPS.

The practical takeaway is that this combo is fully capable of running Rust at 1080p and 1440p with any settings preset, including Ultra, which clears 60 FPS at both resolutions. At 4K, the system can only handle Low settings comfortably, and even then, the 86 FPS average leaves headroom for dips in demanding scenes, though no min values were recorded for that preset. The verdict is that 1440p is the sweet spot for this pairing: Ultra settings deliver 63 FPS, which is just above the playable threshold, and dropping to High yields 83 FPS for a more comfortable margin. For users prioritizing visual quality at 4K, the data suggests that Medium settings at 58 FPS are borderline unplayable, so Low is the only viable option at that resolution.

CPU and GPU Roles

The measured FPS data reveals a clear division of labor between the CPU and GPU in Rust, with the balance shifting significantly across resolutions. At 1080p, the system is heavily CPU-bound. The evidence is in the scaling from Low to Ultra: the Low preset averages 212 FPS, which is far beyond what most GPUs can deliver at 1080p in modern games, yet the RX 9070 is clearly capable of more in less CPU-limited titles. The fact that the FPS drops to 91 at Ultra while the GPU load presumably increases suggests that the Ryzen 5 7500F’s 6 cores and 12 threads are the limiting factor at this resolution. The 70 FPS drop from Low to Medium at 1080p is the largest single-step decline in the entire dataset, which indicates that the CPU cannot maintain the same frame rate when settings increase, even though the GPU has headroom.

At 1440p, the balance shifts somewhat toward the GPU, but the CPU still plays a significant role. The Low preset averages 146 FPS, which is still very high and suggests CPU limitation. The drop from Low to Medium is 48 FPS, and from Medium to Ultra is 35 FPS, which is a more gradual decline than at 1080p. This indicates that the GPU is starting to become more relevant, but the CPU is still able to push frame rates well above 100 FPS on Low settings. The Ultra preset at 1440p averages 63 FPS, which is just above the playable threshold, and this is where the GPU’s workload becomes the primary constraint. The RX 9070’s 16 GB of GDDR6 memory and 644.6 GB/s bandwidth are sufficient for 1440p Ultra, but the frame rate suggests that the GPU is nearing its limit.

At 4K, the GPU is clearly the dominant factor. The Low preset averages 86 FPS, which is a significant drop from the 146 FPS at 1440p Low, indicating that the resolution increase is taxing the GPU far more than the CPU. The Medium preset at 4K averages 58 FPS, and the High preset drops to 49 FPS, with Ultra at 37 FPS. This steep decline across settings at 4K is characteristic of a GPU-bound scenario, where the RX 9070’s 3584 shading units and 128 ROPs are working at full capacity. The CPU’s role at 4K diminishes because the frame rates are lower, giving the Ryzen 5 7500F ample time to process game logic between frames. The data shows that the CPU is the bottleneck at 1080p, a co-bottleneck at 1440p, and the GPU is the bottleneck at 4K.

Best Settings per Resolution

Based on the measured FPS data and the 60 FPS playable threshold, the best settings for each resolution are as follows. At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, which averages 86 FPS. The Medium preset falls short at 58 FPS, so Low is the only viable choice for 4K gaming. This means users at 4K must sacrifice visual quality to achieve smooth performance, and the 86 FPS average provides a comfortable margin above the threshold, though it may dip in crowded scenes.

At 2560x1440, the best settings are Ultra, which averages 63 FPS. This is the most demanding preset that clears 60 FPS, and it does so by a narrow margin of just 3 FPS. For users who want more headroom, High settings average 83 FPS, which is a safer choice for maintaining consistent frame rates during intense moments. However, the data shows that Ultra at 1440p is technically playable, so it is listed as the best settings for that resolution. The 63 FPS average at Ultra confirms the RX 9070’s capability, but the lack of min/max data for that preset means there is some uncertainty about frame time consistency.

At 1920x1080, the best settings are Ultra, which averages 91 FPS. This is the most demanding preset at 1080p, and it clears the 60 FPS threshold by a wide margin of 31 FPS. The Ultra preset at 1080p delivers a smooth experience, and users can also choose High settings for 120 FPS or Medium for 142 FPS if they have high-refresh-rate monitors. The 91 FPS average at 1080p Ultra indicates that the CPU is still a limiting factor, but it is not severe enough to prevent a fully playable experience. In summary, the best settings per resolution are Low at 4K, Ultra at 1440p, and Ultra at 1080p, with the 1440p Ultra result being the most marginal of the three.