Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

94%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
216 FPS
Ultra 1080p Measured
117 FPS

1440p (2K / QHD)

Low 1440p Measured
187 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
110 FPS
Ultra 4K Measured
47 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 32,750
Graphics Card
Required 28,194
Your GPU 49,957

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 62 74 110
1440p QHD 80 106 125 187
1080p Full HD 117 154 182 216

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 154
1920x1080 Low 216
1920x1080 Medium 182
1920x1080 Ultra 117
2560x1440 High 106
2560x1440 Low 187
2560x1440 Medium 125
2560x1440 Ultra 80
3840x2160 High 62
3840x2160 Low 110
3840x2160 Medium 74
3840x2160 Ultra 47

Performance Analysis: Rust on Your System

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5070 Ti delivers a high-refresh-rate experience in Rust, with benchmark results indicating that the combination is capable of handling the game at maximum settings at both 1080p and 1440p, while 4K gaming requires a slight reduction in graphical fidelity to maintain smooth performance. The measured data shows this combo ranks in the 88.8th percentile among tested configurations for this title, placing it firmly in the upper tier of systems for Rust.

Measured FPS Breakdown

The benchmark results provide a clear picture of performance across three resolutions and four quality presets. At 1920x1080, the system demonstrates exceptional headroom, with the Low preset producing an average of 216 FPS. Medium settings deliver 182 FPS on average, with minimums of 155 FPS and maximums reaching 209 FPS. High settings reduce the average to 154 FPS, while the Ultra preset still maintains a robust 117 FPS average. These numbers indicate that at 1080p, the RTX 5070 Ti is rarely the limiting factor, and the Ryzen 5 7400F's Zen 4 architecture keeps frame pacing consistent even when the GPU is not fully saturated.

Moving to 2560x1440, the scaling pattern remains strong but shows expected declines. The Low preset averages 187 FPS, which is only a 13% reduction from the 1080p result. Medium settings produce an average of 125 FPS, with recorded minimums at 106 FPS and maximums at 144 FPS. High settings yield 106 FPS on average, and the Ultra preset maintains an 80 FPS average. The transition from 1080p to 1440p costs approximately 30% performance at the Ultra preset, which aligns with typical pixel-count scaling for a GPU with 16 GB of GDDR7 memory on a 256-bit bus.

At 3840x2160, the data reveals the first meaningful compromises. The Low preset still produces a very playable 110 FPS average, while Medium settings deliver 74 FPS with minimums of 63 FPS and maximums of 85 FPS. High settings average 62 FPS, but the Ultra preset drops to 47 FPS, which falls below the 60 FPS playability threshold. The 4K results show a steep performance cliff between High and Ultra, indicating that the 8,960 shading units and 43.94 TFLOPS of FP32 compute are sufficient for most settings but struggle with the most demanding preset at this resolution.

Best Settings per Resolution

For 1920x1080, the data shows that the Ultra preset is fully playable, maintaining an average of 117 FPS. This is the most demanding preset that stays well above the 60 FPS threshold, and the high average leaves ample room for dips during intense combat or large-scale building demolitions.

At 2560x1440, the Ultra preset also clears the threshold comfortably, producing an 80 FPS average. This represents the best visual quality available in the game while keeping performance at a level suitable for competitive play. The gap between the 80 FPS average and the 60 FPS threshold provides a safety margin for complex scenes.

For 3840x2160, the High preset is the most demanding option that maintains 60 FPS or higher, averaging exactly 62 FPS. While this passes the threshold, the margin is thin, and players seeking guaranteed smoothness may prefer the Medium preset, which offers a 74 FPS average and a 63 FPS minimum. The Ultra preset at 4K is the only combination that fails to meet the playability standard, with a 47 FPS average.

CPU and GPU Roles

The Ryzen 5 7400F provides six cores and twelve threads based on the Zen 4 architecture, with a boost clock of 4.70 GHz. In Rust, which is known for its CPU-intensive simulation and physics calculations, this processor's 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth help maintain consistent frame times. The benchmark data shows that at 1080p, the CPU has a significant influence on performance, as evidenced by the relatively modest 36% improvement when moving from Ultra to Low settings (117 FPS to 216 FPS), which indicates that the GPU is not the sole bottleneck at lower settings.

At 1440p, the balance shifts slightly toward the GPU, with the Ultra-to-Low spread narrowing to a 57% performance difference (80 FPS to 187 FPS). This suggests that while the CPU still plays a role, the increased pixel count begins to load the RTX 5070 Ti more heavily. The 16 GB of GDDR7 memory operating at 896.0 GB/s bandwidth is more than sufficient for Rust's texture and asset streaming requirements at this resolution.

The 4K results demonstrate a clear GPU-bound scenario. The scaling from Low to Ultra shows a 57% performance drop (110 FPS to 47 FPS), which is consistent with the GPU becoming the primary limiting factor. The CPU's influence diminishes at this resolution, as frame rates are constrained by the rendering pipeline rather than physics or simulation updates. The RTX 5070 Ti's 70 RT cores and 280 tensor cores do not directly benefit Rust's rasterized rendering, but the overall GPU compute capacity determines the 4K performance envelope.

FAQ

Q: Can this system run Rust at 4K with maximum settings?

A: No. The Ultra preset at 3840x2160 produces a 47 FPS average, which falls below the 60 FPS playability threshold. The High preset is the best option at 4K, averaging exactly 62 FPS.

Q: How much performance is lost when moving from 1080p to 1440p?

A: At the Ultra preset, the average FPS drops from 117 at 1920x1080 to 80 at 2560x1440, representing a 32% reduction. At the Low preset, the drop is from 216 to 187 FPS, which is a 13% reduction.

Q: Is the Ultra preset playable at 1440p?

A: Yes. The Ultra preset at 2560x1440 produces an 80 FPS average, which clears the 60 FPS threshold by a comfortable margin of 33%.

Q: What is the minimum FPS recorded at 1440p Medium settings?

A: The data shows a minimum of 106 FPS at 2560x1440 with Medium settings, with an average of 125 FPS and a maximum of 144 FPS.

Q: How does this combo rank among all tested systems for Rust?

A: The combination ranks 417th out of 3,723 tested configurations, placing it in the top 11.2% of all systems benchmarked for this game.

Q: Does the CPU or GPU matter more at 1080p?

A: At 1920x1080, the CPU has a more significant role, as the performance difference between Low and Ultra settings is only 46%, suggesting that the Ryzen 5 7400F's six-core design contributes meaningfully to frame rates when the GPU is not fully loaded.

The Verdict

The benchmark data clearly answers whether this PC can run Rust: it can, with considerable authority at standard gaming resolutions. At 1920x1080, all four presets—Low, Medium, High, and Ultra—produce averages of 216, 182, 154, and 117 FPS respectively, all far above the 60 FPS threshold. The Ultra preset's 117 FPS average offers maximum visual fidelity with performance that suits high-refresh-rate monitors.

At 2560x1440, the system again passes every preset, with Ultra averaging 80 FPS, High at 106 FPS, Medium at 125 FPS, and Low at 187 FPS. The 80 FPS Ultra result demonstrates that this resolution is the sweet spot for balancing image quality and frame rate, providing a 33% cushion above the playability threshold.

The 3840x2160 results present the only limitations. The High preset averages 62 FPS, which passes the threshold but leaves little margin for demanding scenes. Medium settings provide a safer 74 FPS average with a 63 FPS minimum, while Low reaches 110 FPS. The Ultra preset's 47 FPS average is the sole failure case, confirming that 4K gaming requires dropping to High or Medium settings for consistent performance.

How This Combo Ranks

The Ryzen 5 7400F and RTX 5070 Ti combination ranks 417th out of 3,723 tested configurations for Rust, placing it in the 88.8th percentile of all systems benchmarked. This top-12% placement reflects the hardware's strong overall capability, though the ranking suggests that other combinations with higher-end CPUs or GPUs achieve better frame rates in this title.

For context, the CPU alone sits in the 83rd percentile among all processors, with an average benchmark score of 32,750, placing it within 0.1% of the Intel Core i5-14600T and 0.2% of the Intel Core Ultra 7 155H. The GPU achieves an 86th percentile ranking among all graphics cards, with an average score of 49,957, sitting 2% below the AMD Radeon RX 6900 XT and 3.1% above the AMD Radeon RX 6800 XT. The combination of these two components creates a system that is well-matched for Rust's demands, though the 4K Ultra limitation and the 417th overall rank indicate that enthusiasts seeking absolute maximum performance at 4K would need to consider higher-tier hardware.