Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

59%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
113 FPS
Ultra 1080p Measured
49 FPS

1440p (2K / QHD)

Low 1440p Measured
78 FPS
Ultra 1440p Measured
33 FPS

4K (Ultra HD)

Low 4K Measured
46 FPS
Ultra 4K Measured
20 FPS
15.6ms Frame Time
23ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 32,750
Graphics Card
Required 28,194
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 26 31 46
1440p QHD 33 44 52 78
1080p Full HD 49 64 76 113

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 113
1920x1080 Medium 76
1920x1080 Ultra 49
2560x1440 High 44
2560x1440 Low 78
2560x1440 Medium 52
2560x1440 Ultra 33
3840x2160 High 26
3840x2160 Low 46
3840x2160 Medium 31
3840x2160 Ultra 20

Performance Analysis: Rust on Your System

How This Combo Ranks

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce GTX 1070 ranks 3082 out of 3723 tested combinations in the database for Rust. This places the combo in the lower 17% of all tested systems, meaning roughly 83% of recorded configurations deliver higher average frame rates in this title. The ranking reflects a hardware pairing where the GPU, an end-of-life Pascal part from 2016, becomes the primary constraint at higher visual loads.

The CPU itself is a strong modern part. The Ryzen 5 7400F sits in the 83rd percentile among all CPUs in the database, with an average benchmark score of 32750. Its nearest rivals include the Intel Core i5-14600T (32707, 0.1% slower), the Intel Core Ultra 7 155H (32697, 0.2% slower), and the AMD Ryzen 7 PRO 6850H (32812, 0.2% faster). These deltas are negligible, so any performance difference between these processors in Rust would be within measurement noise.

The GPU, however, is a different story. The GTX 1070 ranks in the 47th percentile among all GPUs, with an average benchmark score of 9780. Its nearest rivals are the AMD FirePro W5000 (9803, 0.2% faster), the NVIDIA Quadro M2000M (9832, 0.5% faster), the NVIDIA Tesla M10 (9724, 0.6% slower), and the NVIDIA Tesla C2070 (9716, 0.7% slower). These are all older or workstation-oriented parts, which reinforces that the GTX 1070 is now a mid-to-low tier gaming GPU.

The combination of a high-end modern CPU with a dated mid-range GPU creates a system that is heavily GPU-limited in Rust. The data confirms this: at 1080p Low, the combo achieves 113 FPS average, but at 1080p Ultra it drops to 49 FPS. The CPU has ample headroom; the GPU cannot sustain high frame rates at demanding settings.

FAQ

Q: Can this PC run Rust at 60 FPS on a 1080p monitor?

A: Yes, at 1080p the combo clears the 60 FPS threshold at Low (113 FPS average), Medium (76 FPS average), and High (64 FPS average) settings. Ultra settings fall short at 49 FPS average.

Q: What is the best resolution for this system in Rust?

A: 1920x1080 is the only resolution where the system can run at High preset while staying above 60 FPS. At 2560x1440, only Low settings achieve 60+ FPS (78 FPS average). At 3840x2160, no settings clear 60 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 7400F scores 32750 on average, which is within 0.3% of the Intel Core i5-14600T (32707), the Intel Core Ultra 7 155H (32697), and the AMD Ryzen 7 PRO 6850H (32812). These differences are effectively zero for gaming purposes.

Q: How does the GPU compare to its nearest rivals?

A: The GTX 1070 scores 9780 on average. The AMD FirePro W5000 is 0.2% faster (9803), the NVIDIA Quadro M2000M is 0.5% faster (9832), the NVIDIA Tesla M10 is 0.6% slower (9724), and the NVIDIA Tesla C2070 is 0.7% slower (9716). All are statistically equivalent.

Q: What is the frame rate drop from Low to Ultra at 1440p?

A: At 2560x1440, Low settings produce 78 FPS average, while Ultra produces 33 FPS average. That is a 58% reduction in average frame rate when moving from the lowest to the highest preset.

Q: Is Rust more demanding on the CPU or GPU for this combo?

A: The data indicates the GPU is the limiting factor. At 1080p Low, the CPU can push 113 FPS, but at 1080p Ultra the GPU only manages 49 FPS. The scaling between presets is far larger than what would be expected from a CPU-bound scenario.

CPU and GPU Roles

The recorded FPS data shows a clear pattern: Rust scales heavily with GPU load for this combination. The Ryzen 5 7400F is a modern 6-core, 12-thread Zen 4 part with a boost clock of 4.70 GHz and 32 MB of L3 cache. It is more than capable of feeding the GTX 1070 in most scenarios. The bottleneck appears when the GPU's 8 GB of GDDR5 memory and 256.3 GB/s bandwidth are overwhelmed by higher resolutions and settings.

At 1920x1080, the progression from Low (113 FPS) to Medium (76 FPS) to High (64 FPS) to Ultra (49 FPS) shows a steady decline. The CPU is likely not the constraint here, as even the Low preset at 1080p delivers 113 FPS, which is near the practical limit for many games. The GPU's shading units (1920) and texture units (120) are being pushed harder as settings increase.

At 2560x1440, the same pattern continues but with lower absolute numbers: Low (78 FPS), Medium (52 FPS), High (44 FPS), Ultra (33 FPS). The jump from 1080p Low (113 FPS) to 1440p Low (78 FPS) represents a 31% drop, which aligns with the increased pixel count. At 3840x2160, the GPU is severely overloaded: Low (46 FPS), Medium (31 FPS), High (26 FPS), Ultra (20 FPS). No preset at 4K comes close to 60 FPS.

The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the system reaches 113 FPS, which suggests the CPU can drive high frame rates when the GPU is not the limiting factor. However, the GPU's capabilities cap out quickly. The measured data shows the GPU's percentile ranking (47th) is far below the CPU's (83rd), confirming that the graphics card is the primary constraint in Rust.

The Verdict

The database records a clear verdict for this PC in Rust. At 3840x2160, there are no playable settings; every preset falls below the 60 FPS threshold. At 2560x1440, only Low settings are playable, delivering 78 FPS average. At 1920x1080, three presets are playable: Low (113 FPS), Medium (76 FPS), and High (64 FPS). Ultra at 1080p is not playable at 49 FPS.

The best playable configuration overall is 1920x1080 with High settings, achieving 64 FPS average. This is the most demanding preset that stays at or above 60 FPS at any resolution. For 1440p users, the system can run the game, but only at Low settings. For 4K users, the system is not viable for Rust at playable frame rates.

Measured FPS Breakdown

At 3840x2160, the recorded average frame rates are as follows: Low 46 FPS, Medium 31 FPS (min 26, max 35), High 26 FPS, Ultra 20 FPS. None of these reach the 60 FPS playable threshold.

At 2560x1440, the averages are: Low 78 FPS, Medium 52 FPS (min 44, max 60), High 44 FPS, Ultra 33 FPS. Only Low exceeds 60 FPS.

At 1920x1080, the averages are: Low 113 FPS, Medium 76 FPS (min 64, max 87), High 64 FPS, Ultra 49 FPS. The first three presets all clear 60 FPS.

The min and max values are only recorded for Medium settings at each resolution. At 4K Medium, the frame rate fluctuates between 26 and 35 FPS. At 1440p Medium, it ranges from 44 to 60 FPS. At 1080p Medium, it ranges from 64 to 87 FPS. These ranges indicate that Medium settings produce noticeable frame time variation, with the 1080p Medium being the only one that never dips below 60 FPS.

Best Settings per Resolution

At 3840x2160, no settings are playable. The highest average FPS is 46 at Low, which is below the 60 FPS threshold.

At 2560x1440, the best playable setting is Low, with an average of 78 FPS. Medium averages 52 FPS, which is below 60. High and Ultra are progressively worse at 44 and 33 FPS respectively.

At 1920x1080, the best playable setting is High, with an average of 64 FPS. This is the most demanding preset that stays above 60 FPS. Medium (76 FPS) and Low (113 FPS) are also playable, but High offers the best visual quality while maintaining smooth gameplay. Ultra (49 FPS) should be avoided.

Similar Performance Alternatives

For the CPU, the Ryzen 5 7400F's nearest rivals in the database are the Intel Core i5-14600T (32707, 0.1% slower), the Intel Core Ultra 7 155H (32697, 0.2% slower), the AMD Ryzen 7 PRO 6850H (32812, 0.2% faster), and the AMD Ryzen AI 7 PRO 360 (32662, 0.3% slower). Any of these CPUs would produce nearly identical frame rates in Rust when paired with the same GPU, since the differences are within 0.3%.

For the GPU, the GTX 1070's nearest rivals are the AMD FirePro W5000 (9803, 0.2% faster), the NVIDIA Quadro M2000M (9832, 0.5% faster), the NVIDIA Tesla M10 (9724, 0.6% slower), and the NVIDIA Tesla C2070 (9716, 0.7% slower). These are all workstation or older professional cards, meaning they would deliver essentially the same Rust performance as the GTX 1070. However, none of these alternatives offer any meaningful uplift; the entire group sits within 0.7% of each other.

If a user were to swap the GTX 1070 for any of these rivals, the measured FPS numbers would remain virtually unchanged. The same applies to swapping the Ryzen 5 7400F for its rivals. The combination's rank of 3082 out of 3723 is therefore robust across these near-identical alternatives. The limiting factor remains the GPU, and none of the listed rivals change that dynamic.