Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
173 FPS
Ultra 1080p Measured
75 FPS

1440p (2K / QHD)

Low 1440p Measured
119 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
70 FPS
Ultra 4K Measured
30 FPS
10.2ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 32,750
Graphics Card
Required 28,194
Your GPU 15,852

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 40 47 70
1440p QHD 51 67 80 119
1080p Full HD 75 98 116 173

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 173
1920x1080 Medium 116
1920x1080 Ultra 75
2560x1440 High 67
2560x1440 Low 119
2560x1440 Medium 80
2560x1440 Ultra 51
3840x2160 High 40
3840x2160 Low 70
3840x2160 Medium 47
3840x2160 Ultra 30

Performance Analysis: Rust on Your System

The AMD Ryzen 5 7400F paired with the AMD Radeon RX 7700 delivers a solid, if not spectacular, showing in Rust. The data indicates a system that comfortably handles 1080p and 1440p gaming, but struggles to maintain smooth frame rates at 4K resolution. The benchmark results show a clear progression of performance scaling, with the combination of a Zen 4 six-core processor and a 16 GB RDNA 3 graphics card proving well-matched for the game's demands at mainstream resolutions.

Best Settings per Resolution

At 1920x1080, the system achieves its highest visual fidelity while maintaining playability at the Ultra preset, with an average frame rate of 75 FPS. This is the most demanding setting tested at this resolution that stays above the 60 FPS playability threshold.

For 2560x1440, the most demanding playable preset is High, delivering an average of 67 FPS. While the Medium preset runs faster at 80 FPS, the High preset offers superior visual quality while still clearing the 60 FPS target.

At 3840x2160, the only playable option is the Low preset, which averages 70 FPS. The Medium preset at this resolution dips to 47 FPS average, falling below the playability threshold. The data shows that 4K gaming requires a significant reduction in graphical fidelity to remain fluid.

FAQ

Q: Can this system run Rust at 4K resolution with high settings?

A: No. At 3840x2160, the High preset averages only 40 FPS, which is below the 60 FPS playability threshold. The Medium preset also fails to reach playable levels, averaging 47 FPS. Only the Low preset at this resolution achieves playable performance, averaging 70 FPS.

Q: What is the best preset for 1440p gaming?

A: The High preset is the best choice for 2560x1440, as it is the most demanding setting that maintains an average of 67 FPS, exceeding the 60 FPS playable threshold. Lower presets like Medium and Low run faster, but High offers the best balance of visual quality and performance.

Q: How does the system perform at 1080p on Ultra settings?

A: At 1920x1080 with the Ultra preset, the system averages 75 FPS, comfortably surpassing the 60 FPS playability threshold. This makes Ultra the recommended setting for 1080p, as it provides maximum visual fidelity without sacrificing smooth gameplay.

Q: Is there a significant performance difference between 1080p and 1440p?

A: Yes, the data shows a notable drop when moving up in resolution. At 1080p Ultra, the average is 75 FPS, while at 1440p High, it drops to 67 FPS. The gap widens at lower presets: 1080p Low averages 173 FPS compared to 119 FPS at 1440p Low.

Q: Which component is more important for Rust performance?

A: The CPU and GPU both play significant roles, but the GPU becomes the primary bottleneck at higher resolutions. At 4K, the frame rates drop sharply across all settings, indicating the RX 7700's limits. The CPU's strong single-thread performance, evidenced by a Cinebench R23 single-core score of 3072, helps maintain high frame rates at lower resolutions where the GPU has more headroom.

Q: What frame rates can be expected at 1440p on Medium settings?

A: At 2560x1440 with the Medium preset, the system averages 80 FPS, with a minimum of 68 FPS and a maximum of 92 FPS. This provides a consistently smooth experience well above the 60 FPS playability threshold.

Measured FPS Breakdown

The measured frame rates reveal a consistent scaling pattern across resolutions and settings. At 1920x1080, the system delivers its highest performance: 173 FPS average on Low, 116 FPS on Medium, 98 FPS on High, and 75 FPS on Ultra. The Medium preset at this resolution shows a minimum of 99 FPS and a maximum of 133 FPS, indicating very stable performance.

Moving to 2560x1440, the averages decrease as expected. Low settings produce 119 FPS, Medium 80 FPS, High 67 FPS, and Ultra 51 FPS. The Medium preset at 1440p has a reported minimum of 68 FPS and maximum of 92 FPS, showing that even at the lower end, performance remains above the playability threshold.

At 3840x2160, the performance drops significantly. Low settings average 70 FPS, Medium 47 FPS, High 40 FPS, and Ultra 30 FPS. Only the Low preset at this resolution provides a playable experience. The Medium preset at 4K has a reported minimum of 40 FPS and maximum of 54 FPS, which falls short of the 60 FPS target across the board.

The frame rate deltas between presets are substantial. At 1080p, the jump from Ultra to Low represents an increase of 98 FPS. At 1440p, the same jump yields a 52 FPS increase. At 4K, the difference between Ultra and Low is 40 FPS. This scaling indicates that the GPU handles lower settings much more efficiently, particularly at higher resolutions where pixel throughput becomes the limiting factor.

How This Combo Ranks

The AMD Ryzen 5 7400F and AMD Radeon RX 7700 combination ranks 1728 out of 3723 tested combos for Rust. This places the system in the upper-middle range of all tested configurations, meaning it outperforms a majority of systems but is not near the top end. The percentile position reflects the balance of mid-range CPU and GPU hardware.

The CPU itself performs well relative to other processors, sitting in the 83rd percentile against all CPUs. This strong showing comes from its Zen 4 architecture, which delivers solid multi-threaded performance with a Cinebench R23 multi-core score of 21765 and a single-core score of 3072. The GPU, however, is less exceptional, ranking in the 58th percentile against all GPUs, with a Passmark G3D score of 20974.

The combination's rank suggests that while the CPU has headroom, the GPU limits overall performance in Rust, especially at higher resolutions. The system's overall benchmark score of 32750 for the CPU and 15852 for the GPU confirms that the CPU is the stronger component relative to its peers.

Similar Performance Alternatives

The nearest rivals for the CPU provide insight into comparable processors. The Intel Core i5-14600T has an average benchmark score of 32707, which is 0.1% lower than the Ryzen 5 7400F's 32750. The Intel Core Ultra 7 155H scores 32697, a 0.2% difference. The AMD Ryzen 7 PRO 6850H scores 32812, which is 0.2% higher, and the AMD Ryzen AI 7 PRO 360 scores 32662, 0.3% lower. These processors would deliver nearly identical CPU-bound performance in Rust.

For the GPU, the closest rivals include the AMD Radeon R9 370X with an average score of 15862, which is 0.1% lower than the RX 7700's 15852 average benchmark score. The AMD Radeon RX 9060 scores 16014, 1% higher, while the AMD Radeon Pro W5500 scores 15679, 1.1% lower. The NVIDIA GeForce RTX 3060 Ti scores 16129, 1.7% higher. Systems with these GPUs would show very similar frame rates in Rust, with the RTX 3060 Ti potentially offering a marginal performance advantage.

The Verdict

The data confirms that this PC can run Rust effectively at 1080p and 1440p, but not at 4K with high quality settings. At 1920x1080, all four tested presets—Low, Medium, High, and Ultra—exceed the 60 FPS playability threshold, with Ultra averaging 75 FPS. This makes 1080p the optimal resolution for this system, allowing maximum visual settings.

At 2560x1440, three of the four presets are playable: Low at 119 FPS, Medium at 80 FPS, and High at 67 FPS. The Ultra preset at 51 FPS falls short of playable standards. For 1440p users, High settings provide the best visual experience while maintaining smooth gameplay.

At 3840x2160, only the Low preset at 70 FPS is playable. The Medium, High, and Ultra presets all fail to reach the 60 FPS threshold, with averages of 47 FPS, 40 FPS, and 30 FPS respectively. The verdict is clear: this system is not suited for 4K gaming in Rust unless the player accepts significantly reduced graphical quality.

CPU and GPU Roles

The performance scaling across resolutions indicates that the GPU becomes the primary bottleneck as resolution increases. At 1080p, the CPU's strong single-thread performance allows the GPU to work at high utilization, producing 173 FPS on Low settings. The Ryzen 5 7400F's Zen 4 architecture, with a boost clock of 4.70 GHz and 6 cores/12 threads, provides ample processing power for Rust's simulation and entity logic at lower resolutions.

At 1440p, the frame rates drop by roughly 30-40% across all settings compared to 1080p. This reduction is primarily due to the GPU's increased pixel workload. The RX 7700's 16 GB of GDDR6 memory and 624.1 GB/s bandwidth handle the higher resolution, but the rendering demands begin to exceed its capabilities at Ultra settings, where the 51 FPS average falls below the playable threshold.

At 4K, the GPU is clearly the limiting factor. The frame rates at 4K Low (70 FPS) are lower than at 1440p Ultra (51 FPS), showing that resolution scaling has a more significant impact than settings changes. The RX 7700's 2560 shading units and 96 ROPs struggle with the 3840x2160 pixel count, resulting in sub-60 FPS performance on all but the lowest settings.

The CPU's role remains consistent across resolutions, but its impact diminishes as the GPU becomes more strained. The processor's Cinebench R20 multi-core score of 9141 and single-core score of 1290 indicate it has sufficient headroom for Rust at all tested settings. The bottleneck analysis shows that at 1080p, the system is well-balanced, while at 4K, the GPU holds back overall performance. For users seeking higher frame rates at 4K, a more powerful GPU would be necessary, while the CPU could remain unchanged.