Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
126 FPS
Ultra 1080p Measured
54 FPS

1440p (2K / QHD)

Low 1440p Measured
87 FPS
Ultra 1440p Measured
37 FPS

4K (Ultra HD)

Low 4K Measured
51 FPS
Ultra 4K Measured
22 FPS
14.1ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 32,750
Graphics Card
Required 28,194
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 29 34 51
1440p QHD 37 49 58 87
1080p Full HD 54 71 85 126

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 71
1920x1080 Low 126
1920x1080 Medium 85
1920x1080 Ultra 54
2560x1440 High 49
2560x1440 Low 87
2560x1440 Medium 58
2560x1440 Ultra 37
3840x2160 High 29
3840x2160 Low 51
3840x2160 Medium 34
3840x2160 Ultra 22

Performance Analysis: Rust on Your System

AMD Ryzen 5 7400F + AMD Radeon RX 6600 (Rust) — Benchmark Analysis

The AMD Ryzen 5 7400F paired with the AMD Radeon RX 6600 delivers a mixed performance profile in Rust, with clear 60 FPS capability at 1080p and 1440p under specific settings, but a hard ceiling at 4K. Measured data across three resolutions and four quality presets shows the combination is most comfortable at 1920x1080, where it clears the 60 FPS playability threshold in three of four presets, while 2560x1440 requires dropping to Low settings to maintain smooth gameplay. At 3840x2160, no preset reaches the 60 FPS threshold, with the best result being 51 FPS average on Low settings. This analysis breaks down the exact frame rates, component roles, and optimal settings for each resolution.

Measured FPS Breakdown

At 1920x1080, the combination produces its strongest results. The Low preset delivers 126 FPS average, which is the highest frame rate recorded across the entire test matrix. Medium settings yield 85 FPS average with a minimum of 72 FPS and a maximum of 97 FPS, indicating consistent performance within a narrow band. High settings drop to 71 FPS average, still comfortably above the 60 FPS playability threshold. Ultra settings fall to 54 FPS average, which sits below the playable threshold but remains functional for less demanding scenarios. The spread from Low to Ultra represents a 72 FPS swing, highlighting the significant impact of quality settings at this resolution.

Moving to 2560x1440, the frame rates step down noticeably. Low settings produce 87 FPS average, which is the only preset at this resolution that clears the 60 FPS threshold. Medium settings average 58 FPS, with a minimum of 49 FPS and a maximum of 67 FPS — this puts the average just below the playability line, though the maximum suggests occasional peaks into playable territory. High settings drop to 49 FPS average, while Ultra settings fall further to 37 FPS average. The gap between Low and Ultra at this resolution is 50 FPS, a slightly narrower range than at 1080p, which indicates the GPU is becoming a more significant constraint.

At 3840x2160, performance degrades substantially. Low settings produce 51 FPS average, which is the best result at this resolution but still below the 60 FPS threshold. Medium settings average 34 FPS, with a minimum of 29 FPS and a maximum of 40 FPS — the minimum value here represents the lowest recorded frame rate in the entire dataset. High settings average 29 FPS, while Ultra settings drop to 22 FPS average. The resolution scaling from 1080p Low (126 FPS) to 4K Low (51 FPS) represents a 75 FPS reduction, showing how heavily the RX 6600 is taxed at higher pixel counts.

The min/max data available for Medium settings across all resolutions shows consistent behavior: at 1080p Medium, the range is 72-97 FPS; at 1440p Medium, it narrows to 49-67 FPS; at 4K Medium, it tightens further to 29-40 FPS. This progressive narrowing suggests that as resolution increases, the GPU becomes more saturated and frame pacing becomes more constrained, reducing the variance between minimum and maximum frame times.

CPU and GPU Roles

The data indicates a clear shift in bottleneck behavior across resolutions. At 1920x1080, the Ryzen 5 7400F's strong single-thread performance — evidenced by its Cinebench R23 single-core score of 3072 — appears sufficient to feed the RX 6600, as the average frame rates scale almost linearly with preset quality. The 126 FPS at Low versus 54 FPS at Ultra suggests the GPU is the primary limiter even at 1080p, since the CPU would need to handle the increased draw calls and physics calculations at higher presets, yet the frame rate drop is consistent with GPU workload scaling.

At 2560x1440, the balance shifts further toward GPU limitation. The 87 FPS at Low compared to 37 FPS at Ultra represents a 50 FPS drop, which is proportionally similar to the 1080p scaling but at lower absolute values. The Ryzen 5 7400F's 6 cores and 12 threads, coupled with 32 MB of shared L3 cache, provide ample processing headroom for Rust's simulation and building mechanics, but the RX 6600's 8 GB of GDDR6 memory and 224.0 GB/s bandwidth become increasingly stressed as pixel count rises.

At 3840x2160, the GPU is unambiguously the dominant constraint. Even the Low preset, which typically reduces draw distance and texture quality, only achieves 51 FPS average. The RX 6600's 1792 shading units and 8.928 TFLOPS FP32 compute are insufficient to maintain 60 FPS at 4K in Rust, regardless of how much CPU headroom the Ryzen 5 7400F provides. The fact that the 7400F is a modern Zen 4 architecture processor with a boost clock of 4.70 GHz and PCIe Gen 5 support (though the GPU uses PCIe 4.0 x8) means CPU-side bottlenecks are unlikely at any tested resolution.

The scaling patterns between presets reveal that Rust's engine is sensitive to both CPU and GPU workload. At 1080p, the 41 FPS difference between Low and Medium (126 to 85 FPS) suggests the CPU still contributes meaningfully to frame rate, as the GPU should be less saturated at lower pixel counts. However, the 31 FPS drop from Medium to High (85 to 71 FPS) and the 17 FPS drop from High to Ultra (71 to 54 FPS) indicate diminishing returns as GPU load increases, confirming that the RX 6600 is the long-term performance ceiling for this combination.

Best Settings per Resolution

For 1920x1080, the High preset at 71 FPS average is the most demanding setting that maintains 60 FPS or above. This represents the optimal balance, as it provides quality enhancements over Medium (85 FPS) while still clearing the playability threshold. The data shows High at 1080p outperforms Medium at 1440p (58 FPS) and Low at 4K (51 FPS), making it the strongest playable configuration in the entire dataset. Ultra at 54 FPS is not viable for sustained 60 FPS gameplay, though it remains an option for users who prioritize visual fidelity over smoothness.

At 2560x1440, only the Low preset at 87 FPS average meets the 60 FPS threshold. This is the sole playable setting at this resolution, and while 87 FPS provides headroom, the next step up (Medium at 58 FPS) falls just short of the threshold. The 29 FPS gap between Low and Medium at this resolution suggests that the GPU is the limiting factor, as the CPU would likely handle the additional workload without significant frame time impact. Users seeking higher quality at 1440p would need to accept sub-60 FPS performance or reduce resolution.

At 3840x2160, no preset achieves 60 FPS. The best result is Low at 51 FPS average, which represents the maximum performance available at this resolution. Medium at 34 FPS and High at 29 FPS are both well below playable thresholds, and Ultra at 22 FPS is only suitable for static scenes or screenshot purposes. The verdictByResolution data confirms this, listing no playable settings for 4K, with a bestSettings value of null and no average FPS at best.

The Verdict

This PC can run Rust at 60 FPS or above, but only under specific conditions. At 1920x1080, the system clears the playability threshold at Low (126 FPS), Medium (85 FPS), and High (71 FPS), with Ultra (54 FPS) falling just short. At 2560x1440, only Low settings achieve 87 FPS average — the medium preset at 58 FPS misses the mark by 2 FPS, making it borderline but technically below the threshold. At 3840x2160, the system cannot reach 60 FPS under any preset, with Low at 51 FPS being the maximum achievable.

The verdictByResolution data provides a clear summary: 1080p offers three playable presets with High being the best; 1440p offers one playable preset (Low); 4K offers none. For users targeting 60 FPS as the minimum acceptable frame rate, this combination is best suited for 1080p gaming, with 1440p possible only at the lowest quality settings. The 71 FPS at 1080p High represents the sweet spot for visual quality and performance, while the 87 FPS at 1440p Low provides higher resolution but reduced graphical fidelity.

Similar Performance Alternatives

The CPU's nearest rivals based on average benchmark scores show that the Ryzen 5 7400F (avg score 32750) performs nearly identically to several other processors. The Intel Core i5-14600T (avg score 32707) is a 0.1% delta, meaning it would deliver virtually the same CPU-bound performance in Rust. The AMD Ryzen 7 PRO 6850H (avg score 32812) is 0.2% faster, while the Intel Core Ultra 7 155H (avg score 32697) is 0.1% slower, and the AMD Ryzen AI 7 PRO 360 (avg score 32662) is 0.3% slower. These differences are negligible in real-world gaming, so any of these CPUs paired with the RX 6600 would produce nearly identical frame rates.

For the GPU, the RX 6600 (avg score 19036) has four nearest rivals with very tight performance deltas. The NVIDIA Quadro K6000 (avg score 19030) is a 0% difference, making it functionally equivalent in benchmark terms. The NVIDIA GeForce RTX 4050 Mobile (avg score 19049) is 0.1% faster, the NVIDIA Tesla K20m (avg score 19089) is 0.3% faster, and the NVIDIA RTX 2000 Ada Generation (avg score 18954) is 0.4% slower. In practice, any of these GPUs would produce nearly identical FPS numbers in Rust at the tested settings, though the Quadro and Tesla cards are workstation-oriented and may have different driver characteristics.

How This Combo Ranks

Among all tested hardware combinations in the benchmark database, this specific pairing ranks at position 2900 out of 3723 total combos. This places it in the bottom 22% of tested configurations, indicating that while it can play Rust at 1080p and 1440p Low, it is far from a high-end solution. The rank reflects the RX 6600's mid-range positioning (63rd percentile among all GPUs) and the Ryzen 5 7400F's solid but not exceptional CPU standing (83rd percentile among all CPUs). The combination's relatively low rank is primarily driven by the GPU's limitations at higher resolutions, as the CPU's performance percentile is substantially higher.

FAQ

Q: What is the best preset for 60 FPS at 1920x1080?

A: The High preset at 71 FPS average is the most demanding setting that maintains 60 FPS or above at 1080p, according to the measured data.

Q: Can this system run Rust at 2560x1440?

A: Yes, but only on Low settings, which produce 87 FPS average. Medium settings at 58 FPS fall just below the 60 FPS playability threshold.

Q: Is 4K gaming possible with this hardware?

A: No. The best result at 3840x2160 is 51 FPS average on Low settings, which remains below the 60 FPS threshold. No preset at 4K is considered playable.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Ryzen 5 7400F has an average benchmark score of 32750, which is within 0.3% of all four nearest rivals, ranging from the AMD Ryzen AI 7 PRO 360 (0.3% slower) to the AMD Ryzen 7 PRO 6850H (0.2% faster).

Q: What GPU performance is equivalent to the RX 6600?

A: The NVIDIA GeForce RTX 4050 Mobile is 0.1% faster, the NVIDIA Quadro K6000 is exactly 0% different, and the NVIDIA RTX 2000 Ada Generation is 0.4% slower, based on average benchmark scores.

Q: What is the lowest frame rate recorded in testing?

A: The minimum FPS of 29 occurs at 3840x2160 Medium settings, which has an average of 34 FPS and a maximum of 40 FPS.