Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

96%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
164 FPS
Ultra 1080p Measured
84 FPS

1440p (2K / QHD)

Low 1440p Measured
134 FPS
Ultra 1440p Measured
58 FPS

4K (Ultra HD)

Low 4K Measured
79 FPS
Ultra 4K Measured
34 FPS
9.1ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 36,945
Graphics Card
Required 28,194
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 45 53 79
1440p QHD 58 76 90 134
1080p Full HD 84 110 130 164

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 110
1920x1080 Low 164
1920x1080 Medium 130
1920x1080 Ultra 84
2560x1440 High 76
2560x1440 Low 134
2560x1440 Medium 90
2560x1440 Ultra 58
3840x2160 High 45
3840x2160 Low 79
3840x2160 Medium 53
3840x2160 Ultra 34

Performance Analysis: Rust on Your System

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3070 Ti combination ranks 1448 out of 3723 tested combos for Rust, placing it in the upper-middle tier of the database. This pairing of a Zen 3 six-core processor with an Ampere-generation GPU is a coherent match for a survival game that stresses both CPU simulation and GPU rendering. The data shows that this system is fundamentally capable of running Rust smoothly, but the experience varies significantly by resolution and quality preset, with 4K Ultra being the only configuration that falls below the 60 FPS playability threshold.

How This Combo Ranks

The combo’s rank of 1448 out of 3723 places it in roughly the 61st percentile of all tested CPU-GPU pairings for this game. That is a solid mid-pack position, but it reflects a nuanced reality: the RTX 3070 Ti is strong enough for high refresh rates at 1080p, yet the CPU becomes the limiting factor at lower resolutions, and the GPU’s 8 GB memory and 256-bit bus are adequate but not exceptional for Rust’s demanding world streaming.

The CPU alone holds an 85th percentile rank among all CPUs in the database, with an average benchmark score of 36945. That is a strong result for a six-core part. The GPU, meanwhile, sits at the 75th percentile among all GPUs, with an average score of 29945. The gap between the two percentile ranks suggests that the processor is relatively stronger than the graphics card for general compute workloads. In Rust, which relies heavily on server-side simulation and frequent entity updates, that CPU strength helps maintain frame pacing, especially in populated areas. However, the GPU’s lower percentile rank means that at 4K, the graphics card becomes the bottleneck.

Comparing the combo’s rank to the raw benchmark scores, there is a slight mismatch. The CPU’s percentile is well above the GPU’s, yet the combo rank is only middling. This indicates that Rust is not purely CPU-bound; the GPU’s 8 GB VRAM and its Ampere architecture’s performance at high resolutions pull the overall result down. A combo with a weaker CPU but a stronger GPU might rank higher in this specific title, which is worth noting for builders who prioritize Rust over other games.

Similar Performance Alternatives

The CPU’s nearest rivals in the benchmark database are all within a tight performance band. The Intel Core Ultra 5 225 matches the Ryzen 5 5600F almost exactly, with a delta of 0%. The AMD Ryzen 5 5500X3D is 0.2% faster, the AMD Ryzen AI 7 PRO 450 is 0.4% faster, and the Intel Core i9-12900T is 0.5% faster. All four chips cluster within a half-percent of each other, meaning that in Rust, swapping the 5600F for any of these would produce no noticeable difference in CPU-bound frame rates. The 5500X3D is particularly interesting because its 3D V-Cache could theoretically help in simulation-heavy games, but the deltaPct of -0.2% suggests that Rust’s engine does not gain a meaningful advantage from extra cache, at least not in the measured benchmark.

On the GPU side, the RTX 3070 Ti’s nearest rivals are similarly close. The NVIDIA GeForce RTX 5070 Mobile is 0.1% faster, the AMD Radeon RX 6800 is 0.5% slower, the NVIDIA GeForce RTX 2080 Ti is 0.5% faster, and the AMD Radeon RX 6700 is 1.6% slower. The RX 6800 is the most relevant desktop comparison, as it is a direct competitor in the same performance tier. In Rust, the RX 6800’s extra VRAM (16 GB versus 8 GB) might help at 4K Ultra, but the benchmark delta of -0.5% indicates that in the average score, they are effectively tied. The RTX 2080 Ti, a previous-generation flagship, also lands within a half-percent, which shows that the 3070 Ti’s performance is well-anchored.

For a builder, this means that if the Ryzen 5 5600F or RTX 3070 Ti are unavailable, any of these rivals would deliver nearly identical frame rates in Rust. The only caveat is that the RX 6800’s larger memory buffer could be a qualitative advantage at 4K, even if the average score does not show it. The data, however, supports the conclusion that this combo’s performance profile is representative of a broad cluster of mid-range to upper-mid-range hardware.

CPU and GPU Roles

The measured FPS data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the system delivers 164 FPS on Low, 130 FPS on Medium, 110 FPS on High, and 84 FPS on Ultra. The scaling from Low to Ultra is a 49% drop, which is significant but not extreme. The fact that even Ultra clears 60 FPS by a wide margin indicates that the CPU is feeding the GPU enough data to keep it busy, and the GPU is fast enough to render at high rates.

At 2560x1440, the numbers drop: 134 FPS on Low, 90 FPS on Medium, 76 FPS on High, and 58 FPS on Ultra. The gap between Low and Ultra here is 57%, which is larger than at 1080p. This suggests that the GPU is starting to become the limiting factor, but the CPU is still able to sustain high frame rates at the lower presets. The 1440p High result of 76 FPS is particularly noteworthy, as it shows that the system can handle a quality preset at a higher resolution while staying above 60 FPS.

At 3840x2160, the picture changes dramatically. Low delivers 79 FPS, Medium 53 FPS, High 45 FPS, and Ultra 34 FPS. The drop from Low to Ultra is 57%, but the absolute numbers are much lower. Here, the GPU is the clear bottleneck. The CPU’s work at 4K is relatively easier because the GPU is struggling to push pixels, so the processor is not the limiting factor. The evidence for this is the fact that the 4K Low result of 79 FPS is only slightly lower than the 1080p High result of 110 FPS, meaning the CPU can still drive high frame rates if the GPU has less work to do.

Comparing resolution scaling, the average FPS drops from 122 at 1080p (averaged across all presets) to 89.5 at 1440p and 52.75 at 4K. The 1080p to 1440p drop is 26%, while the 1440p to 4K drop is 41%. This nonlinear scaling confirms that the GPU’s pixel-pushing capability becomes the dominant factor as resolution increases. For Rust, which has a large draw distance and complex terrain, the GPU’s role grows with resolution, while the CPU’s role is more constant across all settings.

The Verdict

Yes, this PC can run Rust, and it does so with headroom at most settings. The verdict by resolution is clear: at 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS playability threshold, with Ultra averaging 84 FPS. At 2560x1440, three presets clear 60 FPS: Low (134 FPS), Medium (90 FPS), and High (76 FPS). The Ultra preset at 1440p falls short at 58 FPS, just below the threshold. At 3840x2160, only Low clears 60 FPS, averaging 79 FPS; Medium (53 FPS), High (45 FPS), and Ultra (34 FPS) all fall below.

The practical advice is straightforward: for 1080p gaming, this combo is overqualified, and even Ultra settings are playable. For 1440p, High is the sweet spot, delivering 76 FPS with good visual quality. For 4K, the system is limited to Low settings, which still provides a smooth 79 FPS, but the visual compromises are significant. Players who prioritize frame rate over fidelity should stick to 1440p High or 1080p Ultra, while those with a 4K display should accept Low settings or consider a different GPU.

The verdict also notes that the best settings at each resolution are Low for 4K (79 FPS), High for 1440p (76 FPS), and Ultra for 1080p (84 FPS). These are the maximum quality presets that maintain 60 FPS, and they represent the practical limits of this hardware.

Measured FPS Breakdown

The full measured FPS data is as follows, with average FPS for all presets and min/max where available.

At 3840x2160:

  • Low: 79 FPS average, no min/max recorded
  • Medium: 53 FPS average, with a min of 45 and max of 61
  • High: 45 FPS average, no min/max recorded
  • Ultra: 34 FPS average, no min/max recorded

At 2560x1440:

  • Low: 134 FPS average, no min/max recorded
  • Medium: 90 FPS average, with a min of 76 and max of 103
  • High: 76 FPS average, no min/max recorded
  • Ultra: 58 FPS average, no min/max recorded

At 1920x1080:

  • Low: 164 FPS average, no min/max recorded
  • Medium: 130 FPS average, with a min of 111 and max of 150
  • High: 110 FPS average, no min/max recorded
  • Ultra: 84 FPS average, no min/max recorded

The min/max data only exists for Medium settings, which provides some insight into frame variability. At 1080p Medium, the range is 111 to 150 FPS, a 35% spread, which suggests that the game can have occasional dips in busy scenes. At 1440p Medium, the range is 76 to 103 FPS, a 35% spread as well. At 4K Medium, the range is 45 to 61 FPS, a 35% spread, but the min is dangerously close to the 60 FPS threshold, and the max barely clears it. This indicates that even at Medium settings, 4K can experience stutter or frame drops during intense moments, such as explosions or large player gatherings.

The lack of min/max data for other presets means the database does not capture worst-case scenarios for High or Ultra, but the average FPS for those presets is consistently below the Medium min at 4K, so the variability is likely larger. For example, 4K High averages 45 FPS, which is below the Medium min of 45 FPS, suggesting that High and Ultra are not just slower but also more variable.

FAQ

Q: Can this combo run Rust at 60 FPS on a 1440p monitor?

A: Yes, at High settings it averages 76 FPS, and at Medium it averages 90 FPS. Only Ultra falls below 60 FPS, at 58 FPS average.

Q: What is the best resolution for this PC to play Rust?

A: The data shows that 1920x1080 is the best resolution, as all four presets clear 60 FPS, with Ultra averaging 84 FPS. At 1440p, you must drop to High or lower, and at 4K, only Low is playable.

Q: Does the CPU or GPU limit performance more in Rust?

A: At 1080p, the CPU is more important, as the GPU has enough headroom to render quickly. At 4K, the GPU is the clear bottleneck, with frame rates dropping by up to 57% from Low to Ultra.

Q: How does the Ryzen 5 5600F compare to its closest rivals?

A: The Intel Core Ultra 5 225 is exactly equal in score (0% delta), while the AMD Ryzen 5 5500X3D is 0.2% faster and the AMD Ryzen AI 7 PRO 450 is 0.4% faster. None of these differences will be perceptible in Rust.

Q: What GPU is closest to the RTX 3070 Ti in performance?

A: The AMD Radeon RX 6800 is 0.5% slower, and the NVIDIA GeForce RTX 2080 Ti is 0.5% faster. The RTX 5070 Mobile is 0.1% faster, but that is a laptop part.

Q: Is 4K playable with this combo?

A: Only at Low settings, which averages 79 FPS. Medium averages 53 FPS, High 45 FPS, and Ultra 34 FPS, all below the 60 FPS threshold.