Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
164 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
117 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
69 FPS
Ultra 4K Measured
30 FPS
10.4ms Frame Time
16ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 36,945
Graphics Card
Required 28,194
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 39 46 69
1440p QHD 50 66 78 117
1080p Full HD 73 96 114 164

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 96
1920x1080 Low 164
1920x1080 Medium 114
1920x1080 Ultra 73
2560x1440 High 66
2560x1440 Low 117
2560x1440 Medium 78
2560x1440 Ultra 50
3840x2160 High 39
3840x2160 Low 69
3840x2160 Medium 46
3840x2160 Ultra 30

Performance Analysis: Rust on Your System

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3060 Ti combination delivers a playable Rust experience across most modern resolutions, with the data showing a clear ceiling at 4K. Benchmark results indicate this pairing is well-suited for 1080p and 1440p gaming, while 4K requires a significant settings reduction to maintain the 60 FPS playable threshold. The measured FPS data, derived from actual testing rather than estimation, provides a precise picture of what this hardware can achieve.

Measured FPS Breakdown

At 1920x1080, the combination performs strongly across all four tested presets. The Low preset produces an average of 164 FPS, which is more than double the playable threshold. Medium settings see a drop to 114 FPS average, with a minimum of 97 FPS and a maximum of 131 FPS, indicating consistent frame delivery. High settings yield 96 FPS average, while the demanding Ultra preset still manages a 73 FPS average. All 1080p configurations clear the 60 FPS bar with substantial headroom, making this resolution the most comfortable operating point for the hardware.

Moving to 2560x1440, the performance scales down predictably but remains strong. The Low preset achieves 117 FPS average, which is still nearly double the threshold. Medium settings deliver 78 FPS average, with a minimum of 67 FPS and a maximum of 90 FPS, meaning even the worst-case frame drops stay above the playable line. High settings produce 66 FPS average, which is just above the 60 FPS target, while Ultra drops to 50 FPS average and falls below the playable threshold. The 1440p results show a tighter margin, but three of the four presets remain viable.

At 3840x2160, the picture changes dramatically. The Low preset is the only playable option, producing 69 FPS average. Medium settings fall to 46 FPS average, with a minimum of 39 FPS and a maximum of 53 FPS, all below the threshold. High settings manage only 39 FPS average, and Ultra bottoms out at 30 FPS average. The 4K data reveals a steep performance cliff between Low and Medium settings, suggesting that the memory bandwidth and pixel throughput of the RTX 3060 Ti become limiting factors at this resolution. The gap between Low (69 FPS) and Medium (46 FPS) represents a 33% performance loss from a single settings tier, which is a substantial sensitivity to visual quality changes.

Similar Performance Alternatives

The CPU benchmarks place the Ryzen 5 5600F in close competition with several other processors. The Intel Core Ultra 5 225 scores 36938, a 0% delta from the 5600F's 36945 average. The AMD Ryzen 5 5500X3D scores 37018, a -0.2% delta, meaning it is essentially identical in performance. The AMD Ryzen AI 7 PRO 450 scores 37093 (-0.4%), and the Intel Core i9-12900T scores 37112 (-0.5%). All four alternatives sit within half a percent of the 5600F, so any of them would deliver nearly indistinguishable CPU-bound behavior in Rust.

On the GPU side, the RTX 3060 Ti's nearest rivals show similar clustering. The AMD Radeon RX 9060 scores 16014, a 0.7% delta from the 3060 Ti's 16129 average. The AMD Radeon Pro 5600M scores 16351 (-1.4%), and the AMD Radeon RX 5700 XT scores 16361 (-1.4%). The AMD Radeon R9 370X scores 15862 (1.7%). These deltas are all within two percent, meaning the RX 9060, RX 5700 XT, and Pro 5600M would produce nearly identical frame rates in Rust. The R9 370X trails slightly but remains within a negligible margin. For practical purposes, swapping in any of these GPUs would not change the playable settings breakdown at any resolution.

FAQ

Q: Can this system run Rust at 4K with playable performance?

A: Yes, but only on the Low preset. The measured data shows 69 FPS average at 3840x2160 with Low settings. Medium settings drop to 46 FPS, which is below the 60 FPS playable threshold.

Q: What is the best 1080p preset this combo can handle?

A: The Ultra preset is playable at 1920x1080, producing 73 FPS average. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold at this resolution.

Q: How does the RTX 3060 Ti compare to its nearest GPU rival?

A: The AMD Radeon RX 9060 scores 16014 versus the RTX 3060 Ti's 16129, a 0.7% difference. The AMD Radeon RX 5700 XT scores 16361, a -1.4% delta, indicating near-identical performance in synthetic benchmarks.

Q: Is the CPU a bottleneck at 1440p High settings?

A: The data shows 66 FPS average at 2560x1440 High, which clears the 60 FPS threshold. The CPU's nearest rival, the Intel Core Ultra 5 225, scores within 0% of the Ryzen 5 5600F, so CPU performance is not a limiting factor at this setting.

Q: What is the minimum FPS at 1080p Medium?

A: The measured minimum is 97 FPS, with an average of 114 FPS and a maximum of 131 FPS. Even the worst-case frame time stays well above the 60 FPS playable threshold.

Q: Does the 4K performance gap between Low and Medium indicate a hardware limit?

A: Yes. The drop from 69 FPS to 46 FPS between Low and Medium at 3840x2160 suggests the GPU's 8 GB memory and 448.0 GB/s bandwidth are insufficient for higher-quality textures at that pixel count.

The Verdict

This PC configuration can run Rust at 1080p and 1440p with multiple playable presets, but 4K is limited to Low settings. The verdict by resolution shows that at 3840x2160, only Low settings clear the 60 FPS threshold, achieving 69 FPS average. At 2560x1440, the playable settings are High (66 FPS), Low (117 FPS), and Medium (78 FPS), while Ultra falls short at 50 FPS. At 1920x1080, all four presets are playable, with Ultra delivering 73 FPS average. The system is therefore most capable at 1080p, where it can run the highest visual quality preset, and remains viable at 1440p for high-end visuals. For 4K gaming, the hardware requires the lowest settings to maintain smooth performance.

How This Combo Ranks

Among the 3723 tested combinations in the benchmark database, this pairing of Ryzen 5 5600F and RTX 3060 Ti ranks 1880th for Rust performance. This places it slightly below the median of all tested combos, which is a reasonable position given the hardware generation. The rank reflects the GPU's 59th percentile standing among all GPUs and the CPU's 85th percentile among all CPUs. The CPU is comparatively stronger in its percentile position, but the GPU's lower percentile ranking pulls the overall combo down. In practice, this means the system outperforms a majority of CPUs but is more average on the GPU side, which aligns with the 4K limitations observed in the measured data.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves 73 FPS average. This is the maximum visual quality available at this resolution without sacrificing playability. At 2560x1440, the best playable preset is High, producing 66 FPS average. Ultra at 1440p falls to 50 FPS, so it cannot be recommended. At 3840x2160, the only playable option is Low, which delivers 69 FPS average. Medium at 4K drops to 46 FPS, making it unsuitable for the 60 FPS target. These recommendations maximize visual fidelity while respecting the playable threshold.

CPU and GPU Roles

The data reveals a clear shift in component importance as resolution changes. At 1080p, the CPU's high percentile ranking (85th) allows the GPU to stretch its legs, evidenced by the 164 FPS Low preset result. The GPU's 59th percentile is sufficient to keep up with the CPU at this resolution. At 1440p, the balance remains stable, with High settings producing 66 FPS and Medium producing 78 FPS, suggesting both components are working in concert without a dominant bottleneck.

At 4K, the GPU becomes the clear limiting factor. The drop from 69 FPS at Low to 46 FPS at Medium, and further to 30 FPS at Ultra, indicates that the RTX 3060 Ti's 8 GB memory capacity and 448.0 GB/s bandwidth are overwhelmed by higher texture loads at 3840x2160. The CPU's performance delta from its nearest rival (0% from the Intel Core Ultra 5 225) shows that processor speed is not the constraint at this resolution. The scaling between presets at 4K is steep, while the scaling between resolutions at the same preset (e.g., High: 96 FPS at 1080p to 66 FPS at 1440p to 39 FPS at 4K) demonstrates that the GPU workload grows faster than the CPU workload as pixel count increases. For this game and this hardware, the GPU dictates the playable settings ceiling at higher resolutions, while the CPU provides ample headroom even in the most demanding single-threaded scenarios.