Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
126 FPS
Ultra 1080p Measured
54 FPS

1440p (2K / QHD)

Low 1440p Measured
87 FPS
Ultra 1440p Measured
37 FPS

4K (Ultra HD)

Low 4K Measured
51 FPS
Ultra 4K Measured
22 FPS
14.1ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 36,945
Graphics Card
Required 28,194
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 29 34 51
1440p QHD 37 49 58 87
1080p Full HD 54 71 85 126

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 71
1920x1080 Low 126
1920x1080 Medium 85
1920x1080 Ultra 54
2560x1440 High 49
2560x1440 Low 87
2560x1440 Medium 58
2560x1440 Ultra 37
3840x2160 High 29
3840x2160 Low 51
3840x2160 Medium 34
3840x2160 Ultra 22

Performance Analysis: Rust on Your System

The AMD Ryzen 5 5600F and AMD Radeon RX 6600 combination delivers a markedly different experience in Rust depending on the resolution selected. At 1920x1080, the system is comfortably playable across most presets, but the performance ceiling drops sharply as resolution climbs, leaving 4K as an unplayable option. The measured data provides a clear hierarchy of settings and resolutions for this mid-range pairing.

Measured FPS Breakdown

The benchmark results for this combo cover three resolutions and four quality presets, with average FPS recorded for every configuration. Minimum and maximum FPS values are only available for the Medium preset at each resolution. The overall pattern shows a steep performance cost when moving from 1080p to 1440p, and an even more severe drop at 2160p.

At 1920x1080, the system performs best. The Low preset produces an average of 126 FPS, which is the highest figure recorded for this combination anywhere. High settings average 71 FPS, and Medium averages 85 FPS with a minimum of 72 FPS and a maximum of 97 FPS. The Ultra preset is the only 1080p configuration that fails to clear the 60 FPS threshold, averaging 54 FPS. The gap between Low and Ultra is substantial: 126 FPS versus 54 FPS, a difference of 72 FPS that illustrates the heavy cost of the highest quality settings.

At 2560x1440, performance drops considerably. The Low preset averages 87 FPS, which remains above the playable threshold. Medium averages 58 FPS with a minimum of 49 FPS and a maximum of 67 FPS, placing it just below the 60 FPS line. High settings average 49 FPS, and Ultra drops to 37 FPS. The scaling from 1080p Low to 1440p Low shows a reduction from 126 FPS to 87 FPS, a 39 FPS loss purely from increasing resolution. Similarly, 1080p High at 71 FPS falls to 1440p High at 49 FPS, a 22 FPS decline.

At 3840x2160, the system struggles across the board. Low settings average 51 FPS, which is the only 4K preset that comes close to playable. Medium averages 34 FPS with a minimum of 29 FPS and a maximum of 40 FPS. High averages 29 FPS, and Ultra averages 22 FPS. No 4K preset reaches 60 FPS, and even the lowest setting falls short by 9 FPS. The drop from 1440p Low (87 FPS) to 4K Low (51 FPS) represents a 36 FPS loss, confirming that Rust at 4K demands far more from this GPU than it can deliver.

The Medium preset data reveals the consistency of the frame delivery at each resolution. At 1080p Medium, the range from 72 to 97 FPS shows a 25 FPS spread. At 1440p Medium, the range narrows to 49 to 67 FPS, an 18 FPS spread. At 4K Medium, the range is 29 to 40 FPS, an 11 FPS spread. This tightening of the frame range at higher resolutions suggests that the GPU becomes the limiting factor more uniformly as pixel count increases.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for how this combo compares to other hardware that might be substituted in a similar build. For the AMD Ryzen 5 5600F, the closest alternatives in terms of average benchmark score are the Intel Core Ultra 5 225, the AMD Ryzen 5 5500X3D, the AMD Ryzen AI 7 PRO 450, and the Intel Core i9-12900T. The Ryzen 5 5600F has an average benchmark score of 36945, placing it in the 85th percentile among all CPUs. The Intel Core Ultra 5 225 scores 36938, a delta of 0 percent, making it effectively identical in raw compute performance. The AMD Ryzen 5 5500X3D scores 37018, which is 0.2 percent higher. The AMD Ryzen AI 7 PRO 450 scores 37093, 0.4 percent higher. The Intel Core i9-12900T scores 37112, 0.5 percent higher. These deltas are all within a fraction of a percent, meaning that swapping the Ryzen 5 5600F for any of these chips would produce nearly indistinguishable CPU-bound results in Rust.

For the AMD Radeon RX 6600, the nearest rivals are the NVIDIA Quadro K6000, the NVIDIA GeForce RTX 4050 Mobile, the NVIDIA Tesla K20m, and the NVIDIA RTX 2000 Ada Generation. The RX 6600 has an average benchmark score of 19036, placing it in the 63rd percentile among all GPUs. The NVIDIA Quadro K6000 scores 19030, a delta of 0 percent. The NVIDIA GeForce RTX 4050 Mobile scores 19049, 0.1 percent higher. The NVIDIA Tesla K20m scores 19089, 0.3 percent higher. The NVIDIA RTX 2000 Ada Generation scores 18954, 0.4 percent lower. These GPU alternatives bracket the RX 6600 within a narrow band of roughly half a percent, so any of them would deliver similar frame rates in Rust at the same settings.

The practical implication is that this specific CPU-GPU pairing sits at a point where neither component is dramatically faster or slower than its nearest competitors. A build with the Intel Core Ultra 5 225 instead of the Ryzen 5 5600F would likely produce nearly identical results, as would a system with the NVIDIA GeForce RTX 4050 Mobile instead of the RX 6600. The measured FPS data for this combo can therefore be considered representative of a small cluster of similar hardware.

CPU and GPU Roles

The data indicates that the GPU is the dominant constraint for this game at higher resolutions, while the CPU becomes relatively less important as the pixel count rises. The scaling between resolutions shows this clearly. At 1080p Low, the system produces 126 FPS, which is well above what most displays can show. At 1440p Low, that figure drops to 87 FPS, and at 4K Low it falls to 51 FPS. The consistent decline with increasing resolution points to the GPU's rendering capacity as the primary bottleneck.

The CPU's role is more apparent at lower resolutions where the GPU has less work to do. At 1080p Low, the 126 FPS average suggests that the Ryzen 5 5600F can feed the RX 6600 enough data to keep it busy, but the high frame rate also indicates that the GPU is not overwhelmed. The Ryzen 5 5600F, with its 6 cores and 12 threads based on Zen 3 architecture, provides sufficient single-thread performance for Rust's simulation and draw-call overhead. At 4K, however, the GPU's workload increases to the point where the CPU is likely idle waiting on the graphics pipeline.

The preset scaling reinforces this interpretation. At 1080p, moving from Low to Ultra costs 72 FPS (126 to 54), a 57 percent reduction. At 1440p, the same preset change costs 50 FPS (87 to 37), a 57 percent reduction. At 4K, the cost is 29 FPS (51 to 22), again a 57 percent reduction. The proportional cost of raising quality settings is nearly identical across resolutions, which suggests that the GPU handles the additional shading and texture work in a consistent manner, while the CPU's contribution remains roughly constant.

At 1440p Medium, the average of 58 FPS with a minimum of 49 FPS indicates that the system is borderline playable, with occasional dips below the threshold. The fact that 1080p Medium maintains 85 FPS with a minimum of 72 FPS shows that the extra 78 percent of pixels at 1440p pushes the GPU past its comfort zone. The CPU is unlikely to be the limiting factor in either case, as the Ryzen 5 5600F's single-thread score of 2872 in the PassMark test places it well above the level where it would starve the GPU in this title.

The Verdict

The question of whether this PC can run Rust depends entirely on the target resolution. The verdict data provides a clear answer. At 3840x2160, there are no playable settings. The best option, Low, averages 51 FPS, which falls 9 FPS short of the 60 FPS threshold. Medium, High, and Ultra average 34, 29, and 22 FPS respectively. This resolution is not viable for smooth gameplay.

At 2560x1440, the system is playable only on Low settings. The Low preset averages 87 FPS, which clears the 60 FPS mark comfortably. Medium averages 58 FPS, just below the threshold, and High and Ultra average 49 and 37 FPS. Players at this resolution must accept Low quality to maintain a playable frame rate.

At 1920x1080, the system is playable on three presets. High settings average 71 FPS, Medium averages 85 FPS, and Low averages 126 FPS. Only Ultra fails to reach 60 FPS, averaging 54 FPS. This is the resolution where the combo performs best, offering a smooth experience on High without needing to compromise on quality.

The overall verdict is that this PC can run Rust at 1080p with high quality and at 1440p with low quality, but it cannot run the game at 4K. The 60 FPS threshold is met and exceeded at the lower resolutions, while 4K remains out of reach even with the most aggressive quality reductions.

Best Settings per Resolution

The optimal setting at each resolution is defined as the most demanding preset that still maintains an average of at least 60 FPS. The data shows the following:

At 1920x1080, the best setting is High, which averages 71 FPS. This is the highest quality preset that clears the threshold. Medium averages 85 FPS and Low averages 126 FPS, but High offers the best visual quality among the playable options. Ultra averages 54 FPS, so it cannot be recommended.

At 2560x1440, the best setting is Low, which averages 87 FPS. This is the only preset at this resolution that reaches 60 FPS. Medium averages 58 FPS, which is close but still below the threshold, so players must sacrifice quality to maintain smooth performance.

At 3840x2160, there is no best setting, as no preset achieves 60 FPS. The closest is Low at 51 FPS, which falls short. The verdict data confirms that the playable settings list is empty for this resolution.

These recommendations prioritize a consistent 60 FPS experience. At 1080p, High delivers a strong balance of visual fidelity and performance. At 1440p, Low is the only viable option, and at 4K, the system simply lacks the capability.

How This Combo Ranks

Among all tested combinations of CPUs and GPUs in Rust, this pairing of the AMD Ryzen 5 5600F and AMD Radeon RX 6600 ranks 2900 out of 3723 total combinations. This places the combo in the lower portion of the rankings, at roughly the 78th percentile of tested systems. The rank reflects the overall performance across all resolutions and settings, and the fact that it lands in the bottom quarter of the list indicates that most other tested combos deliver higher frame rates in this game.

The rank is consistent with the measured FPS results. At 1080p, the system performs adequately, but the inability to handle 4K at all and the limited 1440p options drag down its overall standing. The 85th percentile CPU score and 63rd percentile GPU score suggest that neither component is particularly weak, but Rust is a demanding title that benefits from higher-end hardware. The 2900th rank out of 3723 means that roughly 823 tested combos perform worse, while the vast majority perform better.

The GPU's 63rd percentile ranking among all GPUs is the more telling statistic. The RX 6600 is a mid-range card, and Rust's heavy rendering load at high resolutions exposes its limitations. The CPU's 85th percentile ranking shows that the Ryzen 5 5600F is a stronger component relative to its peers, but it cannot compensate for the GPU's constraints in this title.

FAQ

Q: Can this system run Rust at 1920x1080 with 60 FPS on High settings?

A: Yes. The measured average FPS at 1080p High is 71, which is above the 60 FPS playable threshold. The verdict data lists High as the best playable setting at this resolution.

Q: What is the highest frame rate this combo achieves in Rust?

A: The highest recorded average FPS is 126, which occurs at 1920x1080 with the Low preset. This is the maximum across all tested resolutions and settings.

Q: Is 2560x1440 playable with this CPU and GPU?

A: Only on Low settings. The Low preset averages 87 FPS at 1440p, which clears the 60 FPS threshold. Medium averages 58 FPS, which is below the threshold, and High and Ultra are not playable.

Q: Does the system support 4K gaming in Rust?

A: No. At 3840x2160, no preset reaches 60 FPS. The best result is Low at 51 FPS, which is 9 FPS short of the playable threshold. The verdict data lists no playable settings at this resolution.

Q: How does the Ryzen 5 5600F compare to its closest CPU rivals?

A: The Ryzen 5 5600F scores 36945 in the average benchmark, while the Intel Core Ultra 5 225 scores 36938, the AMD Ryzen 5 5500X3D scores 37018, and the AMD Ryzen AI 7 PRO 450 scores 37093. All deltas are within 0.5 percent, so performance is effectively identical.

Q: What is the minimum FPS at 1440p Medium in Rust?

A: The measured minimum FPS at 2560x1440 with Medium settings is 49. The average is 58 FPS and the maximum is 67 FPS, showing that the frame rate dips below 60 at times.

Q: How does the RX 6600 rank against other GPUs?

A: The RX 6600 sits in the 63rd percentile among all GPUs, with an average benchmark score of 19036. Its nearest rivals are the NVIDIA Quadro K6000, the NVIDIA GeForce RTX 4050 Mobile, and the NVIDIA Tesla K20m, all within a 0.3 percent delta.