Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
193 FPS
Ultra 1080p Measured
118 FPS

1440p (2K / QHD)

Low 1440p Measured
169 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
110 FPS
Ultra 4K Measured
51 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 20,468
Graphics Card
Required 28,194
Your GPU 49,957

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 51 65 74 110
1440p QHD 80 109 129 169
1080p Full HD 118 153 165 193

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 153
1920x1080 Low 193
1920x1080 Medium 165
1920x1080 Ultra 118
2560x1440 High 109
2560x1440 Low 169
2560x1440 Medium 129
2560x1440 Ultra 80
3840x2160 High 65
3840x2160 Low 110
3840x2160 Medium 74
3840x2160 Ultra 51

Performance Analysis: Rust on Your System

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 5070 Ti ranks 495th out of 3,723 tested combos for Rust, placing it in the top 13% of all system configurations. This is a strong showing for a mid-range CPU paired with a high-end GPU, though the ranking reflects that Rust is heavily dependent on both processor and graphics performance. The combo’s position suggests it outperforms the vast majority of tested systems while still leaving headroom above it for extreme enthusiast builds with newer flagship CPUs.

How This Combo Ranks

The 495th rank out of 3,723 combos puts this system squarely in the upper tier of tested configurations for Rust. The Ryzen 5 5600 holds a 74th percentile ranking among all CPUs, indicating it outperforms roughly three-quarters of processors in general benchmark workloads. The RTX 5070 Ti sits even higher, at the 86th percentile among all GPUs, showing it is a top-tier graphics solution. When combined, these components produce frame rates that place the system in the 86.7th percentile of all tested combos, meaning only about one in eight tested systems delivers higher average FPS in Rust.

The CPU’s average benchmark score of 20,468 places it within 0.1% of the Intel Core Ultra 7 258V, which scores 20,454, and within 0.2% of both the AMD Ryzen 5 8500G and AMD EPYC 9454P. The GPU’s average score of 49,957 is nearly identical to the AMD Radeon RX Vega 64 at 50,001, a difference of just 0.1%. This near-tie indicates that in raw compute terms, the RTX 5070 Ti and RX Vega 64 are effectively interchangeable, though the RTX 5070 Ti’s newer architecture provides features the older card lacks.

CPU and GPU Roles

The data reveals a clear division of labor between the Ryzen 5 5600 and the RTX 5070 Ti across Rust’s resolution and preset range. At 1080p, the system delivers 193.4 FPS on Low settings but drops to 118.3 FPS on Ultra, a 38.8% reduction. This scaling suggests that at lower resolutions, the CPU is the primary bottleneck, as the GPU has ample headroom to render frames quickly while the processor struggles to keep up with game logic and draw calls. The Ryzen 5 5600’s 6-core, 12-thread configuration with a 4.40 GHz boost clock provides solid single-thread performance, as evidenced by its Cinebench R23 single-core score of 2,584, but Rust’s demanding simulation threads can still limit maximum frame rates.

Moving to 1440p, the frame rate drop from Low to Ultra is 52.6% (169.4 to 80.3 FPS), indicating that the GPU begins to take on more responsibility as pixel count increases. At 4K, the gap widens dramatically: from 109.7 FPS on Low to 51.1 FPS on Ultra, a 53.4% reduction. This pattern shows that at 4K, the RTX 5070 Ti’s 16 GB of GDDR7 memory and 896.0 GB/s bandwidth become the limiting factor, as the GPU must process over four times the pixels of 1080p. The RTX 5070 Ti’s 43.94 TFLOPS of FP32 performance is substantial, but Rust’s high-detail rendering at 4K pushes even this powerful card to its limits on Ultra settings.

The transition from 1080p to 4K at each preset further illustrates this shift. At Low settings, 1080p yields 193.4 FPS while 4K yields 109.7 FPS, a 43.3% drop. At Ultra settings, 1080p yields 118.3 FPS while 4K yields 51.1 FPS, a 56.8% drop. The larger percentage drop at Ultra settings confirms that the GPU becomes increasingly dominant as both resolution and graphical complexity rise. At 1080p, the CPU’s 32 MB of L3 cache and DDR4 memory support are sufficient to feed the GPU, but at 4K Ultra, the GPU’s raw throughput determines the final frame rate.

Best Settings per Resolution

At 1080p, the system can run Rust at Ultra settings with an average of 118.3 FPS, far exceeding the 60 FPS playable threshold. This is the most demanding preset available, and it remains comfortably playable with significant headroom. High settings deliver 153.1 FPS, Medium 164.6 FPS, and Low 193.4 FPS, but none of these are necessary since Ultra already clears the playability bar by nearly double.

At 1440p, Ultra settings produce 80.3 FPS, which also exceeds the 60 FPS threshold with a 33.8% margin. This makes Ultra the best playable setting at this resolution. High settings reach 109.4 FPS, Medium 129.2 FPS, and Low 169.4 FPS, but again, the system can handle maximum quality without dipping below playable frame rates.

At 4K, the situation changes. Ultra settings drop to 51.1 FPS, which falls below the 60 FPS playable threshold. The best playable setting at 4K is High, which delivers 65.4 FPS. This is a modest 9% margin above the playability threshold, leaving little room for demanding scenes or background processes. Medium settings deliver 74.4 FPS, offering a more comfortable buffer, while Low reaches 109.7 FPS. For 4K gaming, High is the most demanding preset that stays playable, but users seeking consistent performance above 70 FPS should consider Medium.

Similar Performance Alternatives

The Ryzen 5 5600 has several near-identical CPU counterparts in terms of average benchmark scores. The Intel Core Ultra 7 258V scores 20,454, just 0.1% lower than the Ryzen 5 5600’s 20,468. The AMD Ryzen 5 8500G scores 20,425 (0.2% lower), and the AMD EPYC 9454P scores 20,422 (0.2% lower). These processors would likely produce nearly identical frame rates in Rust, as their compute performance is statistically indistinguishable. The AMD EPYC 7713, scoring 20,363 (0.5% lower), would also behave very similarly in gaming workloads, despite being a server-class chip.

For the GPU, the AMD Radeon RX Vega 64 scores 50,001, just 0.1% higher than the RTX 5070 Ti’s 49,957, making it the closest direct competitor. The Intel Arc A550M scores 49,737 (0.4% lower), and the AMD Radeon RX 6800 XT scores 48,477 (3.1% lower). The RX 6900 XT scores 50,951, which is 2% higher, indicating it would provide slightly better frame rates in Rust. However, none of these alternatives would change the fundamental playability picture: the system would still clear 60 FPS at 1080p and 1440p Ultra, and still fall short at 4K Ultra.

FAQ

Q: Can this PC run Rust at 60 FPS on 4K Ultra settings?

A: No. The measured average FPS at 3840x2160 Ultra is 51.1 FPS, which falls below the 60 FPS playable threshold. The best playable 4K setting is High, which averages 65.4 FPS.

Q: What is the highest quality preset that maintains 60 FPS at 1440p?

A: Ultra settings at 2560x1440 deliver an average of 80.3 FPS, which is above the 60 FPS threshold. This makes Ultra the most demanding playable preset at this resolution.

Q: How does the Ryzen 5 5600 compare to its closest CPU rivals?

A: The Ryzen 5 5600’s average benchmark score of 20,468 is within 0.2% of the Intel Core Ultra 7 258V, AMD Ryzen 5 8500G, and AMD EPYC 9454P. These processors would produce nearly identical frame rates in Rust.

Q: Is the RTX 5070 Ti significantly faster than the RX Vega 64 in Rust?

A: No. The RTX 5070 Ti’s average GPU score of 49,957 is only 0.1% lower than the RX Vega 64’s 50,001. In Rust, these cards would perform nearly identically in terms of average FPS.

Q: What frame rate can I expect at 1080p with Medium settings?

A: The system delivers an average of 164.6 FPS at 1920x1080 with Medium settings. This is well above the 60 FPS threshold and provides a very smooth experience.

Q: Does the CPU or GPU limit performance more at 1080p?

A: At 1080p, the CPU is the primary bottleneck. The frame rate difference between Low (193.4 FPS) and Ultra (118.3 FPS) is 38.8%, indicating that even the most demanding settings cannot fully saturate the RTX 5070 Ti at this resolution.

The Verdict

This system can definitely run Rust, and it does so exceptionally well at 1080p and 1440p. At 1920x1080, all four presets — Low, Medium, High, and Ultra — deliver frame rates well above 60 FPS, with Ultra averaging 118.3 FPS. This means players can max out every graphical setting at 1080p and still enjoy a smooth, responsive experience with nearly double the playable threshold.

At 2560x1440, the system again clears 60 FPS on every preset, with Ultra averaging 80.3 FPS. This provides a 33.8% buffer above the playability threshold, making 1440p Ultra a viable choice for high-refresh-rate monitors up to 75 Hz. For 1440p gaming, this combo is excellent, offering high detail without compromise.

At 3840x2160, the system hits a wall. Ultra settings average 51.1 FPS, which falls below the 60 FPS threshold. High settings are the most demanding playable option, averaging 65.4 FPS, but this is a slim margin. Medium settings provide a more comfortable 74.4 FPS, and Low reaches 109.7 FPS. For 4K, players must choose between High settings with a modest frame rate or Medium settings for a more stable experience. The system is playable at 4K, but not at maximum quality, and users prioritizing frame rate over fidelity should stick to Medium or High presets.