Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 34 | 45 | 53 | 79 |
| 1440p QHD | 58 | 76 | 90 | 134 |
| 1080p Full HD | 84 | 110 | 130 | 191 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3070 Ti combination delivers a playable Rust experience at every tested resolution, but the ceiling for visual quality differs sharply. At 1080p, the combo can push Ultra settings at 84 FPS; at 1440p, High settings hold at 76 FPS; at 4K, only Low settings remain fluid at 79 FPS. The data shows a system that is clearly GPU-bound at higher resolutions, with the CPU’s strong single-thread performance becoming the limiting factor only when frame rates climb past the 130 FPS mark.
Best Settings per Resolution
1920x1080 (1080p): The most demanding preset that stays at or above 60 FPS is Ultra, with an average of 84 FPS. This is a comfortable margin above the 60 FPS playable threshold, leaving headroom for dips in busy scenes. The measured FPS at Medium is 130, at High is 110, and at Low is 191, so even the heaviest preset clears the bar by 24 FPS. For players prioritizing maximum visual fidelity, Ultra is the clear choice here because it runs at 84 FPS, which is 40% faster than the 60 FPS minimum required for smooth play.
2560x1440 (1440p): The best settings are High, delivering an average of 76 FPS. Ultra drops to 58 FPS, which falls below the 60 FPS playable threshold, so it is not recommended for consistent performance. Medium runs at 90 FPS and Low at 134 FPS, but High offers the best balance of visual quality and frame rate. The 76 FPS average is 16 FPS above the playable line, providing a buffer for open-world rendering loads that Rust frequently throws at the system.
3840x2160 (4K): Only Low settings remain playable, with an average of 79 FPS. Medium dips to 53 FPS, High to 45 FPS, and Ultra to 34 FPS — all below the 60 FPS threshold. The jump from Low to Medium costs 26 FPS, which indicates a steep scaling penalty as texture detail and shadow complexity increase at 4K. Players with 4K displays must accept Low settings for a fluid experience, as no other preset clears the 60 FPS line.
CPU and GPU Roles
The data reveals a clear division of labor that shifts with resolution. At 1080p, the CPU plays a more significant role because the GPU can generate frames quickly enough to expose processor limits. The Low preset at 1080p hits 191 FPS, which is 43% higher than the 134 FPS at 1440p Low and 142% higher than the 79 FPS at 4K Low. This scaling pattern indicates that at 1080p, the Ryzen 5 5600’s six cores and 12 threads are the primary driver, especially in Rust’s simulation-heavy gameplay where entity updates and physics calculations tax the processor.
At 1440p, the balance shifts toward the GPU. The difference between Low and High at 1440p is 58 FPS (134 versus 76), while at 1080p the same preset gap is 81 FPS (191 versus 110). The smaller delta at 1440p suggests the GPU is beginning to bottleneck, as the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth handle the increased pixel count with less headroom for frame rate variation.
At 4K, the GPU becomes the dominant constraint. The RTX 3070 Ti’s 21.75 TFLOPS of FP32 compute is not sufficient to maintain high preset fidelity at this resolution. The evidence is stark: Ultra at 4K runs at 34 FPS, which is 60% slower than High at 1440p (76 FPS) and 60% slower than Ultra at 1080p (84 FPS). The resolution scaling from 1080p Ultra to 4K Ultra shows a 50 FPS drop, while the CPU’s workload remains relatively constant, proving that the graphics card is the limiting factor at 4K.
The medium preset data reinforces this: 1080p Medium runs at 130 FPS, 1440p Medium at 90 FPS, and 4K Medium at 53 FPS. The 40 FPS drop from 1080p to 1440p and the 37 FPS drop from 1440p to 4K are almost linear, which is characteristic of GPU-bound scenarios where pixel throughput dictates performance. For this reason, players seeking higher frame rates at 1440p or 4K should consider GPU upgrades first, while 1080p players might benefit more from CPU tuning.
How This Combo Ranks
This combination ranks 1341 out of 3723 tested combos in Rust, placing it in the 64th percentile of all systems tested. That means it outperforms roughly two-thirds of the configurations in the database for this specific game. The rank is respectable but not top-tier, reflecting the RTX 3070 Ti’s position as a high-end last-generation GPU paired with a mid-range current-generation CPU.
The combo’s performance is consistent with its component percentiles: the Ryzen 5 5600 sits in the 74th percentile among all CPUs, and the RTX 3070 Ti sits in the 75th percentile among all GPUs. The game-specific rank of 1341 out of 3723 is slightly lower than either component’s general percentile, suggesting that Rust’s particular optimization favors other hardware traits — likely the CPU’s cache hierarchy or the GPU’s memory bandwidth — that this pairing does not fully exploit.
At 1080p, the combo’s 84 FPS on Ultra is strong enough to rank in the top half of systems, but the 4K results drag the overall position down. Many higher-ranked combos likely feature GPUs with more than 8 GB of VRAM, which is a critical factor for Rust’s large texture sets at high resolutions. The 34 FPS at 4K Ultra is a clear weak point that prevents this combo from climbing higher in the rankings.
Similar Performance Alternatives
The Ryzen 5 5600’s nearest rivals in CPU benchmark scores are the Intel Core Ultra 7 258V, which scores 0.1% higher, the AMD Ryzen 5 8500G at 0.2% higher, the AMD EPYC 9454P at 0.2% higher, and the AMD EPYC 7713 at 0.5% higher. These processors would deliver nearly identical CPU-bound performance in Rust, meaning the 1080p frame rates would be indistinguishable in practice. The Core Ultra 7 258V is a mobile-focused chip, but its benchmark parity suggests that laptop users with that processor would see similar simulation performance.
The RTX 3070 Ti’s nearest GPU rivals are the NVIDIA GeForce RTX 5070 Mobile at 0.1% higher score, the AMD Radeon RX 6800 at 0.5% lower, the NVIDIA GeForce RTX 2080 Ti at 0.5% higher, and the AMD Radeon RX 6700 at 1.6% lower. In gaming terms, swapping the RTX 3070 Ti for an RTX 2080 Ti would produce nearly identical frame rates across all resolutions, since their average benchmark scores differ by less than 1%. The RX 6800, despite its slightly lower score, has 16 GB of VRAM compared to the 3070 Ti’s 8 GB, which could offer an advantage in Rust at 4K if texture memory becomes a bottleneck.
For players considering a GPU swap, the RX 6700 would cost about 1.6% performance in synthetic benchmarks, but its different memory configuration might alter real-world Rust results. The RTX 5070 Mobile is a laptop part, so desktop builders would more likely consider the RX 6800 or RTX 2080 Ti as direct replacements. None of these alternatives would change the fundamental verdict: the system remains playable at 1080p Ultra and 1440p High, but struggles at 4K beyond Low settings.
FAQ
Q: Can this PC run Rust at 60 FPS on 1080p with maximum settings?
A: Yes. The Ultra preset at 1920x1080 delivers an average of 84 FPS, which is 24 FPS above the 60 FPS playable threshold. The Medium preset runs at 130 FPS and High at 110 FPS, so all settings at 1080p clear the bar.
Q: What is the best preset for 1440p gaming?
A: High settings at 2560x1440 produce an average of 76 FPS, which is the most demanding preset that stays above 60 FPS. Ultra drops to 58 FPS, which falls below the playable threshold, so High is the recommended choice.
Q: Is 4K gaming viable with this hardware?
A: Only at Low settings, which average 79 FPS. Medium drops to 53 FPS, High to 45 FPS, and Ultra to 34 FPS, so any preset above Low will not maintain 60 FPS at 3840x2160.
Q: How does the Ryzen 5 5600 compare to its closest CPU rivals?
A: The Intel Core Ultra 7 258V scores 0.1% higher, the AMD Ryzen 5 8500G scores 0.2% higher, the AMD EPYC 9454P scores 0.2% higher, and the AMD EPYC 7713 scores 0.5% higher. These differences are negligible for gaming, so real-world Rust performance would be nearly identical.
Q: What GPU alternatives perform similarly to the RTX 3070 Ti?
A: The RTX 5070 Mobile scores 0.1% higher, the RX 6800 scores 0.5% lower, the RTX 2080 Ti scores 0.5% higher, and the RX 6700 scores 1.6% lower. The RTX 2080 Ti is the closest desktop equivalent, while the RX 6800 offers more VRAM at a slight benchmark deficit.
Q: Is the CPU or GPU more important for Rust at 1080p?
A: The CPU plays a larger role at 1080p, evidenced by the 191 FPS at Low settings versus 110 FPS at High. The 81 FPS gap between presets suggests the Ryzen 5 5600’s single-thread performance is the primary driver, while the GPU becomes the bottleneck at 1440p and 4K.
The Verdict
This PC can run Rust, and it does so with authority at most settings. At 1920x1080, every preset including Ultra clears the 60 FPS threshold, with the Ultra average of 84 FPS providing a 40% margin above the playable line. At 2560x1440, High settings are the ceiling, delivering 76 FPS, while Ultra falls to 58 FPS — just shy of the mark. The 4K story is more restrictive: only Low settings at 79 FPS are playable, with Medium at 53 FPS, High at 45 FPS, and Ultra at 34 FPS all failing the 60 FPS requirement.
The verdict is clear: this combo is a strong 1080p and 1440p machine for Rust, but a 4K player must make significant visual sacrifices. The RTX 3070 Ti’s 8 GB VRAM and 21.75 TFLOPS compute are sufficient for high-fidelity gaming at lower resolutions, but the 4K Ultra result of 34 FPS demonstrates a hard limit. The Ryzen 5 5600 handles the simulation load well, as shown by the 191 FPS at 1080p Low, but it is not the bottleneck at higher resolutions.
For players with 1080p monitors, this system is overqualified — Ultra settings at 84 FPS is a luxurious experience. For 1440p users, High settings offer a great balance at 76 FPS. For 4K enthusiasts, the system will run the game, but only at Low settings, which negates the visual benefits of the higher resolution. Overall, the combo ranks 1341 out of 3723 systems, placing it comfortably above average for Rust, with the caveat that its 4K performance lags behind its 1080p and 1440p capabilities.