Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 30 | 37 | 59 |
| 1440p QHD | 43 | 54 | 65 | 95 |
| 1080p Full HD | 57 | 79 | 95 | 141 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3060 Ti combination delivers a solid 1080p experience in Rust, with the data indicating that the most demanding preset that stays at or above the 60 FPS playable threshold is High, achieving an average of 79.3 FPS. At 2560x1440, the combo maintains 60 FPS up to Medium settings, with an average of 64.6 FPS, while at 3840x2160, no tested preset reaches the 60 FPS threshold, with the best result being 58.5 FPS on Low settings.
Best Settings per Resolution
The measured FPS data reveals a clear pattern of performance scaling across resolutions for this hardware pairing. At 1920x1080, the combo can handle the High preset with an average of 79.3 FPS, which is comfortably above the 60 FPS playable threshold. This makes High the most demanding preset that remains playable at this resolution, as the Ultra preset drops to 57.1 FPS, just below the target. The gap between High and Ultra at 1080p is 22.2 FPS, suggesting that the Ultra preset introduces a significant additional load that this hardware cannot fully absorb.
Moving to 2560x1440, the most demanding playable preset is Medium, which produces an average of 64.6 FPS. This is a notable step down from 1080p High, showing that the resolution increase from 1080p to 1440p costs roughly 14.7 FPS on the same preset tier. The Low preset at 1440p delivers 95.2 FPS, which is even higher than the 1080p High result, indicating that the Low preset is far less demanding than High, but the data shows that Medium is the sweet spot for visual quality without sacrificing playability at this resolution.
At 3840x2160, the situation changes dramatically. The Low preset yields 58.5 FPS, which is just 1.5 FPS short of the 60 FPS threshold. This means that even the lowest settings cannot achieve a fully playable experience at 4K, and the Medium preset drops to 37.0 FPS, a 21.5 FPS loss from Low. The High and Ultra presets at 4K are even more demanding at 29.6 and 24.7 FPS respectively, making 4K gaming with this combo impractical for smooth play.
How This Combo Ranks
The combo ranks 2545 out of 3723 tested configurations in Rust, placing it in the lower-middle tier of all possible hardware combinations. This percentile position suggests that while this setup can run the game, there are many other combos that deliver better performance, particularly at higher resolutions and settings. The rank of 2545 out of 3723 means that roughly 68% of tested combos outperform this pairing, which is a reflection of the RTX 3060 Ti's mid-range positioning and the Ryzen 5 5600's solid but not top-tier CPU performance.
The CPU's percentileVsAllCpus is 74, meaning it performs better than 74% of all CPUs in the benchmark database, while the GPU's percentileVsAllGpus is 59, meaning it outperforms 59% of all GPUs. This disparity suggests that the CPU is relatively stronger than the GPU in this pairing, which could influence how the system handles Rust's CPU-intensive game logic. The combo rank in-game being lower than either component's individual percentile indicates that Rust's specific workload does not favor this particular combination as much as other games might, likely due to the game's heavy reliance on both CPU and GPU resources simultaneously.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of performance across all resolutions and settings. At 1920x1080, the Low preset achieves 140.6 FPS, which is the highest result in the entire dataset. The Medium preset delivers 94.8 FPS, and the High preset produces 79.3 FPS, while the Ultra preset drops to 57.1 FPS. The scaling from Low to Medium at 1080p is a 45.8 FPS drop, while the drop from Medium to High is 15.5 FPS, and from High to Ultra is 22.2 FPS. This non-linear scaling suggests that the Ultra preset introduces disproportionately heavy effects that impact performance significantly.
At 2560x1440, the Low preset yields 95.2 FPS, which is 45.4 FPS lower than the 1080p Low result, showing the significant impact of resolution on frame rate. The Medium preset at 1440p produces 64.6 FPS, which is 30.2 FPS lower than the 1080p Medium result. The High preset at 1440p delivers 54.3 FPS, and the Ultra preset drops to 42.6 FPS. The relative scaling between presets at 1440p follows a similar pattern to 1080p, with the largest drop occurring between Low and Medium at 30.6 FPS.
At 3840x2160, the Low preset achieves 58.5 FPS, which is the highest result at this resolution. The Medium preset drops to 37.0 FPS, representing a 21.5 FPS loss, while the High preset produces 29.6 FPS and the Ultra preset yields 24.7 FPS. The 4K results show that the gap between Low and Medium is much smaller in absolute terms than at lower resolutions, but the percentage drop is similar, indicating that the GPU is becoming the primary bottleneck at this resolution.
Similar Performance Alternatives
Looking at the nearestRivals data for the CPU, the AMD Ryzen 5 5600's average benchmark score of 20468 is closely matched by several alternatives. The Intel Core Ultra 7 258V scores 20454, which is 0.1% lower, while the AMD Ryzen 5 8500G scores 20425, 0.2% lower. The AMD EPYC 9454P and AMD EPYC 7713 score 20422 and 20363 respectively, both within 0.5% of the Ryzen 5 5600. These CPUs would deliver nearly identical performance in Rust, meaning that swapping the Ryzen 5 5600 for any of these would result in negligible FPS differences.
For the GPU, the NVIDIA GeForce RTX 3060 Ti's average benchmark score of 16129 is closely matched by the AMD Radeon RX 9060, which scores 16014, just 0.7% lower. The AMD Radeon Pro 5600M and AMD Radeon RX 5700 XT score 16351 and 16361 respectively, both 1.4% higher, while the AMD Radeon R9 370X scores 15862, which is 1.7% lower. These GPU alternatives would produce nearly identical frame rates in Rust, with the RX 5700 XT being the closest performance match among the listed rivals. It is important to note that the R9 370X is a much older card, but the data shows its benchmark score is remarkably close, suggesting it may perform similarly in this specific game.
FAQ
Q: Can the AMD Ryzen 5 5600 + RTX 3060 Ti run Rust at 1080p with 60 FPS?
A: Yes, the data shows that at 1920x1080, the High preset achieves an average of 79.3 FPS, which is above the 60 FPS playable threshold. The Ultra preset, however, drops to 57.1 FPS, so High is the highest playable setting.
Q: What is the best setting for 2560x1440 gaming?
A: The Medium preset at 2560x1440 delivers an average of 64.6 FPS, which is the most demanding setting that stays above 60 FPS. The Low preset achieves 95.2 FPS, but Medium provides better visual quality while maintaining playability.
Q: Is this combo capable of 4K gaming in Rust?
A: No, the verdictByResolution data shows no playable settings at 3840x2160. The best result is the Low preset with an average of 58.5 FPS, which is below the 60 FPS threshold.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 5 5600's nearest rivals include the Intel Core Ultra 7 258V with a 0.1% lower score, the AMD Ryzen 5 8500G with a 0.2% lower score, and the AMD EPYC 9454P and EPYC 7713 with 0.2% and 0.5% lower scores respectively. All would perform nearly identically in Rust.
Q: What GPU alternatives would perform similarly to the RTX 3060 Ti?
A: The AMD Radeon RX 9060 is 0.7% slower, while the AMD Radeon Pro 5600M and AMD Radeon RX 5700 XT are both 1.4% faster. The AMD Radeon R9 370X is 1.7% slower, despite being an older card.
Q: How does the combo rank among all tested configurations?
A: The combo ranks 2545 out of 3723 tested combinations in Rust, placing it in the lower-middle tier. This means about 68% of tested combos perform better, though the system still offers playable performance at 1080p and 1440p.
The Verdict
The verdictByResolution data clearly indicates that this PC can run Rust at playable frame rates for most users. At 1920x1080, the combo clears the 60 FPS threshold with the High preset at 79.3 FPS, making this the recommended configuration for the best balance of visual quality and performance. The 2560x1440 resolution also offers playable performance with the Medium preset at 64.6 FPS, though users wanting higher settings would need to drop to Low to achieve 95.2 FPS. The 3840x2160 resolution is not playable at any setting, as even the Low preset falls short of 60 FPS with 58.5 FPS.
The data suggests that this combo is best suited for 1080p gaming, where it can handle High settings with a comfortable margin above the playable threshold. At 1440p, the system remains viable but requires more conservative settings, and at 4K, it falls short entirely. Users with 1080p or 1440p monitors will find this combination capable, but those with 4K displays should consider alternatives or be prepared for sub-60 FPS performance.
CPU and GPU Roles
The performance scaling across resolutions reveals important insights into which component matters more for Rust. The CPU's percentileVsAllCpus of 74 is notably higher than the GPU's percentileVsAllGpus of 59, suggesting that the CPU is the stronger component in this pairing. This is reflected in the FPS data: at 1080p, where the GPU is less stressed, the system achieves high frame rates across all settings, with the Ultra preset still reaching 57.1 FPS. This indicates that the CPU can feed the GPU sufficiently at lower resolutions.
The transition from 1080p to 1440p shows a significant FPS drop across all presets, with the Low preset dropping from 140.6 to 95.2 FPS, a 45.4 FPS loss. This 32% reduction suggests that the GPU becomes increasingly important as resolution increases, since the pixel count grows faster than the CPU's ability to compensate. The 4K results reinforce this trend, with even the Low preset dropping to 58.5 FPS, indicating that the GPU is the primary bottleneck at this resolution.
The data also shows that the gap between Low and Ultra settings widens at higher resolutions. At 1080p, the difference between Low and Ultra is 83.5 FPS, while at 1440p it is 52.6 FPS, and at 4K it is 33.8 FPS. This narrowing gap at higher resolutions suggests that the GPU's limitations dominate as resolution increases, making CPU performance less relevant to overall frame rates. For users planning to play at 1080p, the CPU's strength is more apparent, while at 1440p and 4K, the GPU's capabilities become the limiting factor.