Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 51 | 58 | 86 |
| 1440p QHD | 65 | 83 | 100 | 144 |
| 1080p Full HD | 92 | 122 | 144 | 193 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 5600 paired with the AMD Radeon RX 9070 presents a compelling mid-range combination for Rust, a survival title known for its demanding simulation and rendering loads. The measured data shows this pairing is broadly capable, though its performance envelope varies significantly depending on resolution and quality preset. At 1080p and 1440p, this combo delivers smooth, high-refresh-rate gameplay, while 4K requires more conservative settings to maintain fluidity. The benchmark results indicate a system that scales predictably, with the GPU becoming the primary bottleneck as resolution increases.
Measured FPS Breakdown
The measured FPS data provides a clear picture of how this hardware handles Rust across three resolutions and four quality presets. At 1920x1080, performance is exceptionally strong across the board. The Low preset delivers an average of 193 FPS, which is the highest recorded average for this combo. Moving up the quality ladder, the Medium preset hits 144 FPS, High achieves 122.2 FPS, and even the demanding Ultra preset maintains a solid 92.2 FPS. This indicates that at 1080p, the combination of the Ryzen 5 5600 and RX 9070 has ample headroom, likely being limited more by the CPU's single-thread performance in lighter scenes than by the GPU's rendering capacity.
At 2560x1440, the performance remains highly playable but begins to show the GPU's workload increasing. The Low preset produces an average of 144.3 FPS, which is still excellent for competitive play. Medium follows at 99.5 FPS, and High at 82.5 FPS. The Ultra preset at 1440p yields 65.4 FPS, which just clears the 60 FPS threshold, indicating that this is the ceiling for maximum visual fidelity at this resolution. The scaling from 1080p to 1440p suggests a roughly 30-40% drop in frame rate at each preset, which is typical for a GPU-bound scenario at higher resolutions.
The 3840x2160 results show a more pronounced performance cliff. At 4K, the Low preset averages 85.6 FPS, which is still respectable. However, Medium drops to 58.2 FPS, High falls to 51.2 FPS, and Ultra plummets to 37.9 FPS. These numbers clearly indicate that the RX 9070, while powerful, is not sufficient for high-fidelity 4K gaming in Rust without significant compromises. The transition from 1440p to 4K represents a substantial increase in pixel count, and the data shows the GPU struggling to maintain 60 FPS beyond the Low preset. Notably, the min and max FPS values are not provided in the data, so this analysis relies solely on average frame rates, which may obscure occasional stutters or frame time spikes.
Similar Performance Alternatives
Examining the nearest rivals for both components helps contextualize this combo's standing. The CPU, AMD Ryzen 5 5600, sits at the 74th percentile of all tested CPUs with an average benchmark score of 20468. Its closest competitors are remarkably close in performance: the Intel Core Ultra 7 258V scores 20454 (0.1% slower), the AMD Ryzen 5 8500G scores 20425 (0.2% slower), the AMD EPYC 9454P scores 20422 (0.2% slower), and the AMD EPYC 7713 scores 20363 (0.5% slower). This clustering suggests that for Rust's CPU demands, the Ryzen 5 5600 is effectively interchangeable with these other processors, with negligible differences in overall compute capability. The data implies that users with any of these CPUs would see nearly identical frame rates in CPU-bound scenarios.
For the GPU, the AMD Radeon RX 9070 holds the 69th percentile among all tested GPUs, with an average benchmark score of 23877. Its nearest rivals present an interesting mix: the NVIDIA GeForce GTX TITAN Z scores 23736 (0.6% slower), the AMD Radeon RX 6800S scores 24063 (0.8% faster), the NVIDIA GeForce RTX 3080 Mobile scores 23628 (1.1% slower), and the NVIDIA GeForce RTX 2080 SUPER scores 24170 (1.2% faster). These deltas are all within a narrow band, suggesting that the RX 9070's performance in Rust would be closely mirrored by these alternatives. In practice, a system with an RTX 2080 SUPER or RX 6800S would produce nearly identical average FPS in this game, making them viable substitutes for budget-conscious builders. The GTX TITAN Z and RTX 3080 Mobile are slightly slower but still within a 1.1% margin, meaning real-world differences would be imperceptible.
Best Settings per Resolution
Determining the best settings requires identifying the most demanding preset that still maintains an average of at least 60 FPS. At 1920x1080, the Ultra preset achieves 92.2 FPS, which is well above the threshold. Therefore, Ultra is the recommended setting at 1080p, offering the highest visual quality without sacrificing smoothness. At 2560x1440, the Ultra preset also clears 60 FPS with an average of 65.4 FPS. While this is a slimmer margin than at 1080p, it remains comfortably playable, so Ultra is again the best choice for 1440p. The data suggests that this combo can handle maximum settings at these two resolutions.
At 3840x2160, the situation changes dramatically. The Ultra preset only manages 37.9 FPS, which is far below the playable threshold. High (51.2 FPS) and Medium (58.2 FPS) also fail to reach 60 FPS. Only the Low preset, with an average of 85.6 FPS, clears the bar. Consequently, the best settings for 4K are Low, as it is the only preset that provides a fluid experience. Pushing to Medium would result in a noticeable drop to 58.2 FPS, which might be acceptable for some players but falls short of the stated 60 FPS target. The data clearly shows that 4K gaming with this combo requires substantial graphical compromises to remain smooth.
The Verdict
Based on the verdictByResolution data, the answer to whether this PC can run Rust is a definitive yes, but with caveats at higher resolutions. At 1920x1080, all four presets—Low, Medium, High, and Ultra—are listed as playable, with the best being Ultra at 92.2 FPS. This makes the system ideal for high-refresh-rate monitors (144Hz or higher) at 1080p, as even the most demanding settings provide excellent frame rates. At 2560x1440, all presets are also playable, with Ultra delivering 65.4 FPS. This is sufficient for 60Hz displays and even some 75Hz or 100Hz panels, though users with 144Hz 1440p monitors may need to dial back to High (82.5 FPS) or Medium (99.5 FPS) to fully utilize their refresh rate.
At 3840x2160, the verdict is more restrictive. Only the Low preset is deemed playable, with an average of 85.6 FPS. The Medium, High, and Ultra presets all fall below 60 FPS (58.2, 51.2, and 37.9 FPS respectively). Therefore, for 4K gaming, users must accept Low settings to maintain smooth gameplay. This means sacrificing most visual enhancements, which may be a significant drawback for players who prioritize image quality. The data indicates that this combo is not suited for high-fidelity 4K Rust, but it can still deliver a playable experience at lower settings.
FAQ
Q: What is the highest preset that maintains 60 FPS at 2560x1440?
A: The Ultra preset at 2560x1440 achieves an average of 65.4 FPS, making it the most demanding preset that clears the 60 FPS threshold at this resolution.
Q: Can this system handle Rust at 4K with maximum settings?
A: No. At 3840x2160, the Ultra preset only averages 37.9 FPS. The lowest playable preset at 4K is Low, which delivers 85.6 FPS.
Q: How does the Ryzen 5 5600 compare to its closest CPU rivals?
A: The Ryzen 5 5600 has an average benchmark score of 20468, placing it at the 74th percentile. Its nearest rivals, such as the Intel Core Ultra 7 258V (20454) and AMD Ryzen 5 8500G (20425), are within 0.2% performance, meaning they are functionally equivalent for Rust.
Q: What is the average FPS at 1920x1080 with Medium settings?
A: At 1920x1080 with Medium settings, the average FPS is 144. This is well above the 60 FPS playable threshold and suitable for high-refresh-rate gaming.
Q: Is the RX 9070 significantly faster or slower than its nearest GPU rivals?
A: The RX 9070's closest rivals are all within a 1.2% margin. The RTX 2080 SUPER is 1.2% faster, while the RTX 3080 Mobile is 1.1% slower. These differences are negligible in practice.
Q: At which resolution does the Ultra preset become unplayable?
A: At 3840x2160, the Ultra preset drops to 37.9 FPS, which is below the 60 FPS threshold. The Ultra preset is only playable at 1920x1080 (92.2 FPS) and 2560x1440 (65.4 FPS).
How This Combo Ranks
The AMD Ryzen 5 5600 + AMD Radeon RX 9070 combination ranks 1104 out of 3723 tested combos in Rust. This places it in the top 30% of all tested systems, which is a respectable position for a mid-range pairing. The rank reflects the balance between the CPU's strong 74th percentile standing and the GPU's slightly lower 69th percentile. The data suggests that while this combo is not at the absolute top tier, it outperforms the majority of systems tested for this game. The gap between the CPU and GPU percentiles indicates that the graphics card is the limiting factor in most scenarios, particularly at higher resolutions where GPU load increases. In practical terms, this rank means players can expect a smooth experience at 1080p and 1440p, with the system falling short only at 4K with high-quality presets. This positioning makes it a solid choice for gamers who prioritize 1080p or 1440p gaming without needing the absolute highest frame rates or 4K capabilities.
CPU and GPU Roles
Understanding which component matters more for Rust at each resolution requires analyzing the scaling between presets and resolutions. At 1920x1080, the CPU's role is more pronounced. The frame rate difference between Low (193 FPS) and Ultra (92.2 FPS) is 100.8 FPS, indicating that the GPU is heavily utilized when settings increase. However, the CPU's 74th percentile score and 6-core/12-thread configuration suggest it has enough headroom to feed the GPU at lower settings, where the 193 FPS result implies a CPU-bound scenario. The high frame rates at Low settings indicate that the Ryzen 5 5600 can push well beyond 144 FPS in less demanding scenes, but the GPU becomes the bottleneck as settings rise.
At 2560x1440, the balance shifts toward the GPU. The frame rate drops from Low (144.3 FPS) to Ultra (65.4 FPS), a reduction of 78.9 FPS. This larger drop compared to 1080p suggests that the GPU is working harder to fill the additional pixels. The CPU's influence diminishes, as even the highest preset still achieves 65.4 FPS, which is above the 60 FPS threshold. This indicates that the RX 9070 is the primary constraint at 1440p, but the CPU is still sufficient to avoid becoming a limiting factor.
At 3840x2160, the GPU is unequivocally the dominant component. The frame rate plummets from Low (85.6 FPS) to Ultra (37.9 FPS), a difference of 47.7 FPS. The fact that even the Low preset at 4K (85.6 FPS) is lower than the Ultra preset at 1440p (65.4 FPS) highlights the massive pixel count increase. The CPU's role is minimal here, as the GPU is clearly overwhelmed by the 4K resolution. The data suggests that upgrading the CPU would yield little benefit at 4K, while a more powerful GPU would be required to improve frame rates at this resolution. Conversely, at 1080p, a CPU upgrade might help push frame rates higher in CPU-bound scenarios, but the current combo already delivers excellent performance.