Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
137 FPS
Ultra 1080p Measured
62 FPS

1440p (2K / QHD)

Low 1440p Measured
97 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
23 FPS
13ms Frame Time
20ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 19,593
Graphics Card
Required 28,194
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 34 37 53
1440p QHD 43 55 66 97
1080p Full HD 62 77 94 137

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 77
1920x1080 Low 137
1920x1080 Medium 94
1920x1080 Ultra 62
2560x1440 High 55
2560x1440 Low 97
2560x1440 Medium 66
2560x1440 Ultra 43
3840x2160 High 34
3840x2160 Low 53
3840x2160 Medium 37
3840x2160 Ultra 23

Performance Analysis: Rust on Your System

The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 3060 Ti combination delivers a playable Rust experience at 1080p and 1440p, but it is not viable at 4K. The data shows this pairing is fully capable of exceeding the 60 FPS threshold at 1080p across every preset, including Ultra, while 1440p users must settle for Medium settings to maintain smooth gameplay. At 3840x2160, no settings preset reaches the playable threshold, with even Low settings falling short at 53.4 FPS average. This analysis breaks down the measured performance across all resolutions and presets, identifies the CPU and GPU roles, and provides concrete settings recommendations.

Measured FPS Breakdown

The measured FPS data reveals a clear performance hierarchy across resolutions and settings presets. At 1920x1080, the combination delivers its strongest results. Low settings produce an average of 137.4 FPS, which is the highest recorded figure for this combo in Rust. Medium settings drop to 94.3 FPS average, while High settings yield 76.8 FPS. Ultra settings at 1080p produce 62 FPS average, which clears the 60 FPS playable threshold but leaves only 2 FPS of headroom. The scaling from Low to Ultra at 1080p shows a performance reduction of 75.4 FPS, indicating that the Ultra preset costs roughly 55% of the Low preset's performance.

Moving to 2560x1440, the performance drops are substantial but the combo remains playable on certain presets. Low settings average 96.6 FPS, which is a 40.8 FPS reduction compared to the same settings at 1080p. Medium settings at 1440p produce 66.3 FPS average, still above the 60 FPS threshold. High settings drop to 54.7 FPS average, falling below the playable line. Ultra settings at 1440p average 42.5 FPS, which is the lowest 1440p figure recorded. The gap between Low and Ultra at 1440p is 54.1 FPS, showing that resolution scaling amplifies the cost of higher presets.

At 3840x2160, no preset achieves playable performance. Low settings average 53.4 FPS, which is the highest 4K figure but still 6.6 FPS short of the 60 FPS threshold. Medium settings drop to 37.3 FPS average, while High settings produce 34.3 FPS. Ultra settings at 4K average 22.8 FPS, which is the lowest score across all tested configurations. The difference between Low and Ultra at 4K is 30.6 FPS, confirming that Rust's Ultra preset imposes a severe penalty at high resolutions. The resolution scaling from 1080p Low to 4K Low shows a 84 FPS reduction, highlighting how heavily this game is affected by pixel count.

FAQ

Q: Can this PC run Rust at 1080p with maximum settings?

A: Yes. The Ultra preset at 1920x1080 produces an average of 62 FPS, which is above the 60 FPS playable threshold. The data shows this is the only resolution where Ultra settings are playable.

Q: What is the best playable settings preset at 1440p?

A: Medium settings at 2560x1440 deliver 66.3 FPS average, which is the highest playable preset at that resolution. High settings fall to 54.7 FPS, below the threshold, so Medium is the recommended maximum.

Q: Is 4K gaming possible with this Ryzen 5 5500 and RTX 3060 Ti combination?

A: No. All four presets at 3840x2160 fail to reach 60 FPS. Low settings average 53.4 FPS, Medium averages 37.3 FPS, High averages 34.3 FPS, and Ultra averages 22.8 FPS. The highest 4K score is still 6.6 FPS short of playable.

Q: How does the RTX 3060 Ti's performance compare to its nearest rivals?

A: The GPU's average benchmark score is 16129, which places it 0.7% behind the AMD Radeon RX 9060 and 1.4% behind both the AMD Radeon Pro 5600M and AMD Radeon RX 5700 XT. It is 1.7% ahead of the AMD Radeon R9 370X.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: Low settings average 137.4 FPS, while Ultra settings average 62 FPS. This represents a 75.4 FPS reduction, meaning Ultra delivers approximately 45% of the Low preset's performance at 1080p.

Q: Does the CPU bottleneck the GPU in Rust at lower resolutions?

A: The data suggests the CPU becomes more relevant at lower resolutions. At 1080p, the FPS difference between Low and Ultra is 75.4 FPS, while at 4K the same preset gap is only 30.6 FPS. This indicates that at 4K, the GPU is the primary limiting factor, whereas at 1080p, the CPU's processing of game logic has a larger relative impact.

CPU and GPU Roles

The benchmark data reveals how the Ryzen 5 5500 and RTX 3060 Ti divide responsibilities across resolutions in Rust. At 3840x2160, the GPU is clearly the dominant constraint. The 4K FPS figures are uniformly low across all presets, with the spread from Low to Ultra being just 30.6 FPS (53.4 to 22.8). This narrow range indicates that even at Low settings, the RTX 3060 Ti cannot feed frames fast enough to overcome the pixel workload. The GPU's 8 GB VRAM and 256-bit memory bus are the limiting factors here, as the data shows no preset can reach 60 FPS.

At 2560x1440, the balance shifts slightly toward the CPU. The FPS range from Low to Ultra is 54.1 FPS (96.6 to 42.5), which is wider than at 4K but still constrained by GPU throughput. Medium settings at 66.3 FPS show that the combo can keep up with moderate graphical loads, but High and Ultra presets expose the GPU's limitations. The Ryzen 5 5500's 6 cores and 12 threads are sufficient to feed the GPU at 1440p, as evidenced by the fact that Low settings reach 96.6 FPS without a CPU bottleneck.

At 1920x1080, the CPU's role becomes more pronounced. The FPS range from Low to Ultra is 75.4 FPS (137.4 to 62), which is the widest spread of any resolution. This suggests that at 1080p, the CPU can push frame rates much higher when the GPU is not overloaded, but the GPU still caps performance on higher presets. The Ryzen 5 5500's single-thread score of 836 in 3DMark and Cinebench R23 single-core score of 2319 indicate strong per-core performance, which is critical for Rust's game logic. The CPU's 16 MB L3 cache and 51.2 GB/s memory bandwidth also contribute to maintaining high minimum frame rates in complex scenes.

The resolution scaling data further clarifies the roles. Dropping from 1080p Low to 4K Low reduces FPS by 84 (137.4 to 53.4), which is a 61% performance loss. This disproportionate drop confirms that the GPU is the primary bottleneck at higher resolutions. Conversely, the CPU's importance is highest at 1080p, where the 137.4 FPS Low result demonstrates that the Ryzen 5 5500 can drive frame rates well beyond the GPU's capability on lower graphical loads. The verdict is clear: for 4K, the RTX 3060 Ti is insufficient; for 1080p and 1440p, the CPU provides adequate support, but the GPU governs the upper limits of playable settings.

The Verdict

This PC can run Rust, but the playable experience depends entirely on resolution. At 1920x1080, the combination clears the 60 FPS threshold on all four presets. High settings average 76.8 FPS, Medium averages 94.3 FPS, Low averages 137.4 FPS, and even Ultra averages 62 FPS. This makes 1080p the only resolution where Ultra settings are viable, albeit with just 2 FPS of headroom. Gamers prioritizing visual fidelity should use Ultra at 1080p, while those seeking smoother frame rates can drop to High or Medium for a significant FPS boost.

At 2560x1440, the verdict is more restrictive. The playable settings are Low (96.6 FPS) and Medium (66.3 FPS). High settings at 54.7 FPS and Ultra at 42.5 FPS both fall below the 60 FPS threshold. The best playable setting at 1440p is Medium, which provides 66.3 FPS average. This configuration offers a balanced experience, though users must accept reduced graphical quality compared to 1080p Ultra.

At 3840x2160, the verdict is clear: this PC cannot run Rust at a playable frame rate. The highest average FPS is 53.4 on Low settings, which is 6.6 FPS below the playable threshold. Medium, High, and Ultra all produce averages below 40 FPS. The data shows no viable 4K configuration, so users should avoid attempting 4K with this combo. For the best experience, 1080p is the recommended resolution, with 1440p Medium serving as a viable alternative for those with higher-resolution monitors.

How This Combo Ranks

In the database of tested combinations, the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 3060 Ti pairing ranks 2544 out of 3723 combos for Rust. This places the combo in the bottom 32% of all tested systems, indicating that it is a below-average performer for this specific game. The rank reflects the measured FPS data, which shows strong 1080p performance but severe limitations at higher resolutions. The CPU's percentile rank of 73 out of 100 against all CPUs is respectable, while the GPU's percentile rank of 59 is moderate. However, Rust's demanding nature at high resolutions drags the overall combo ranking down.

The CPU's nearest rivals provide context for its performance. The Ryzen 5 5500 has an average benchmark score of 19593, which is 0.1% behind the AMD Ryzen AI 5 430 (19617) and 0.4% behind the Intel Core i5-12500 (19668). It is 0.5% ahead of the Intel Core i7-10700F (19499) and 0.7% ahead of the Intel Core i5-11600KF (19723). These deltas are negligible, meaning the CPU is effectively on par with its closest competitors. The GPU's nearest rivals show similar parity: the RTX 3060 Ti's average score of 16129 is 0.7% behind the AMD Radeon RX 9060 (16014), 1.4% behind the AMD Radeon Pro 5600M (16351), 1.4% behind the AMD Radeon RX 5700 XT (16361), and 1.7% ahead of the AMD Radeon R9 370X (15862).

The low combo rank of 2544 out of 3723 is more a reflection of Rust's optimization and system requirements than the individual components' quality. Both the CPU and GPU are mid-range parts with solid benchmark scores, but Rust's heavy reliance on GPU throughput at high resolutions punishes this pairing. The data indicates that this combo is best suited for 1080p gaming, where it ranks competitively, but it falls behind in the broader database due to poor 4K performance.

Best Settings per Resolution

The optimal settings for each resolution prioritize the highest visual preset that maintains an average of 60 FPS or above. At 1920x1080, the Ultra preset is the best choice, delivering 62 FPS average. This is the most demanding setting that clears the playable threshold. Users who prefer higher frame rates can choose High (76.8 FPS), Medium (94.3 FPS), or Low (137.4 FPS), but Ultra offers the best visual quality without dropping below 60 FPS. The 2 FPS margin at Ultra is narrow, so users with variable refresh rate monitors may prefer High for additional headroom.

At 2560x1440, the Medium preset is the best playable setting, producing 66.3 FPS average. This provides a 6.3 FPS buffer above the 60 FPS threshold. Low settings at 1440p deliver 96.6 FPS but with reduced visual quality. High and Ultra settings are not recommended at 1440p because they fall below 60 FPS (54.7 and 42.5 FPS respectively). The Medium preset at 1440p represents the best balance of visual fidelity and frame rate for this resolution.

At 3840x2160, there is no best setting because no preset achieves 60 FPS. The highest average is 53.4 FPS on Low settings, which is below the playable threshold. Medium (37.3 FPS), High (34.3 FPS), and Ultra (22.8 FPS) are all significantly below playable. Users with 4K displays should reduce the resolution to 1440p or 1080p to achieve playable frame rates. The data confirms that this combo is not suitable for 4K gaming in Rust, regardless of settings adjustments.