Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 20 | 30 |
| 1440p QHD | 22 | 29 | 34 | 51 |
| 1080p Full HD | 32 | 42 | 49 | 74 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
How This Combo Ranks
The AMD Ryzen 5 5500 paired with the AMD Radeon RX 580 lands at rank 3397 out of 3723 tested combos in Rust. That places this configuration in the lower portion of the database, roughly at the 91st percentile from the bottom. In practical terms, this combo is positioned well below the median tested system, and the recorded frame rates confirm that it struggles to deliver smooth gameplay except at the most modest settings.
The CPU itself sits at the 73rd percentile among all tested processors, which is respectable for a modern six-core part. The GPU, however, sits at the 53rd percentile among all tested graphics cards, meaning it is essentially average or slightly below average in the broader GPU landscape. When combined, the two components do not boost each other; the GPU becomes the limiting factor in most scenarios, especially as resolution increases.
Benchmark results indicate that the combo's overall standing is driven primarily by the GPU's age and architecture. The RX 580, built on GCN 4.0, shows its limitations in a game like Rust that is sensitive to both CPU and GPU performance. The CPU's strong multi-threaded showing, with a Cinebench R23 multi-core score of 16429 and a PassMark multi-thread score of 19330, does not translate into high frame rates when the GPU cannot keep pace. At 1080p Low, the combo achieves 74 FPS on average, which clears the 60 FPS playable threshold. At every other setting or resolution, the average falls below that mark.
The data shows a clear pattern: the lower the resolution and the lower the preset, the closer this combo gets to playable territory. At 1440p, even Low settings only reach 51 FPS on average. At 4K, the best case is 30 FPS on Low, which is half the playable threshold. This is a combo that can run Rust, but only under very specific conditions.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 5 5500 is bracketed by several processors with nearly identical average benchmark scores. The AMD Ryzen AI 5 430 scores 19617, just 0.1% higher than the Ryzen 5 5500's 19593 average. The Intel Core i5-12500 is 0.4% ahead with a score of 19668, while the Intel Core i7-10700F is 0.5% behind at 19499. The Intel Core i5-11600KF is 0.7% ahead at 19723. In Rust, any of these CPUs would deliver very similar CPU-bound behavior, meaning the frame rate differences would likely be negligible when paired with the same GPU.
For the GPU, the AMD Radeon RX 580's nearest rivals show a similarly tight cluster. The NVIDIA GeForce RTX 3050 Ti Mobile scores 12940, just 0.1% higher than the RX 580's 12928 average. The NVIDIA GeForce GTX 1660 SUPER is 0.4% ahead at 12986, while the AMD Radeon 740M is 0.5% behind at 12870. The AMD FirePro W5100 is 0.6% behind at 12847. In practical terms, a system with a GTX 1660 SUPER would produce nearly identical frame rates in Rust as the RX 580, assuming the same CPU. The same applies to the RTX 3050 Ti Mobile, though that is a mobile part and would not be a direct desktop replacement.
The implication is that if a user already owns a Ryzen 5 5500 and is considering a GPU upgrade, moving to any of these near-identical alternatives would not change the Rust experience meaningfully. The bottleneck would remain the GPU, and the frame rates would stay within a few percent of what the RX 580 delivers.
FAQ
Q: Can this PC run Rust at 60 FPS on any setting?
A: Yes, but only at 1920x1080 with Low settings. The recorded data shows an average of 74 FPS at that resolution and preset. No other resolution or preset combination reaches 60 FPS on average.
Q: What is the best resolution for this combo in Rust?
A: The only resolution where the combo clears the 60 FPS playable threshold is 1920x1080, and only with Low settings. At 2560x1440, the best average is 51 FPS on Low. At 3840x2160, the best average is 30 FPS on Low.
Q: How does the combo perform at Medium settings across resolutions?
A: At 1920x1080 Medium, the average is 49 FPS with a minimum of 42 and a maximum of 57. At 2560x1440 Medium, the average drops to 34 FPS with a range of 29 to 39. At 3840x2160 Medium, the average is 20 FPS with a range of 17 to 23.
Q: Is the CPU or GPU more responsible for the low frame rates?
A: The GPU is the primary constraint at higher resolutions and presets. The CPU has a strong multi-threaded score, but the RX 580's performance percentile is much lower. At 1080p Low, the CPU can feed the GPU enough to reach 74 FPS, but at higher settings the GPU cannot keep up.
Q: What are the minimum and maximum frame rates recorded at 1080p?
A: The only preset with recorded min and max values at 1080p is Medium, which shows a minimum of 42 and a maximum of 57. For Low, High, and Ultra, only the average is recorded: 74, 42, and 32 respectively.
Q: Does the combo rank suggest it is a good match for Rust?
A: The rank of 3397 out of 3723 combos places it in the bottom 9% of tested systems for this game. That indicates a poor match for anything beyond low-resolution, low-preset play.
The Verdict
The recorded data shows that this PC can run Rust, but only under a narrow set of conditions. At 1920x1080 with Low settings, the combo achieves an average of 74 FPS, which clears the 60 FPS playable threshold. This is the only configuration where the game is fully smooth. At 2560x1440, no preset reaches 60 FPS on average; the best case is Low at 51 FPS. At 3840x2160, even Low settings only average 30 FPS, which is far below playable.
For users who insist on higher visual quality, the situation is grim. At 1080p Medium, the average is 49 FPS, which is playable but not smooth, with dips to 42 FPS. At 1080p High, the average falls to 42 FPS. At 1080p Ultra, it drops to 32 FPS. At 1440p and 4K, every preset except 1440p Low falls below 40 FPS, and most fall below 30 FPS.
The verdict is straightforward: this combo is suitable for Rust only at 1080p with Low settings. Any attempt to raise the preset or resolution will result in frame rates that are noticeably choppy. The database's verdictByResolution field confirms this, listing only 1920x1080 Low as a playable setting, with an average of 74 FPS at that setting.
Measured FPS Breakdown
At 1920x1080, the measured averages across presets are as follows: Low averages 74 FPS, Medium averages 49 FPS with a minimum of 42 and a maximum of 57, High averages 42 FPS, and Ultra averages 32 FPS. The difference between Low and Medium is 25 FPS, which is a substantial jump. The gap between Medium and High is 7 FPS, and between High and Ultra is 10 FPS.
At 2560x1440, the averages drop significantly. Low averages 51 FPS, Medium averages 34 FPS with a range of 29 to 39, High averages 29 FPS, and Ultra averages 22 FPS. The drop from 1080p to 1440p at Low settings is 23 FPS, indicating that the GPU is struggling with the additional pixel count even at the lowest preset.
At 3840x2160, the averages are barely playable in any sense. Low averages 30 FPS, Medium averages 20 FPS with a range of 17 to 23, High averages 17 FPS, and Ultra averages 13 FPS. The drop from 1080p Low to 4K Low is 44 FPS, a reduction of nearly 60%.
The data shows a consistent trend: each step up in resolution costs roughly 20 to 30 FPS on the same preset, and each step up in preset costs roughly 7 to 10 FPS at the same resolution. The only exception is the jump from Low to Medium at 1080p, which costs 25 FPS, more than any other preset transition.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Low, with an average of 74 FPS. Medium falls to 49 FPS, which is below the threshold. Therefore, Low is the only viable preset at this resolution.
At 2560x1440, no preset reaches 60 FPS. The best average is 51 FPS on Low, which is 9 FPS short of the playable threshold. The database records no playable settings for this resolution.
At 3840x2160, no preset comes close to 60 FPS. The best average is 30 FPS on Low, which is exactly half the threshold. The database records no playable settings for this resolution.
For users who want the highest visual quality while maintaining 60 FPS, the answer is simple: 1080p Low is the only choice. Any attempt to increase the preset or resolution will result in average frame rates below 60 FPS.
CPU and GPU Roles
The data indicates that the GPU is the dominant constraint at higher resolutions, while the CPU becomes more relevant only at 1080p Low. At 1080p Low, the combo achieves 74 FPS, which suggests that the CPU is capable of feeding the GPU enough data to reach a smooth frame rate. The Ryzen 5 5500's multi-threaded performance, with a Cinebench R23 score of 16429 and a PassMark multi-thread score of 19330, is sufficient for Rust's CPU demands at this setting.
However, as resolution increases, the GPU's workload grows faster than the CPU's. At 1440p Low, the average drops to 51 FPS, a 23 FPS reduction from 1080p Low. At 4K Low, the average drops to 30 FPS, another 21 FPS reduction. These drops are almost entirely attributable to the GPU, as the CPU's workload does not scale with resolution in a meaningful way. The RX 580, with a PassMark G3D score of 8813 and a percentile of 53, simply cannot sustain high frame rates at higher pixel counts.
The preset scaling also points to GPU dominance. At 1080p, moving from Low to Medium costs 25 FPS, from Medium to High costs 7 FPS, and from High to Ultra costs 10 FPS. The large drop from Low to Medium suggests that Medium introduces effects that heavily tax the GPU's shading units and memory bandwidth. The RX 580's 256.0 GB/s memory bandwidth and 6.175 TFLOPS of FP32 performance are insufficient for those effects at a smooth frame rate.
At higher resolutions, the preset scaling becomes even more punishing. At 1440p, the gap between Low and Ultra is 29 FPS. At 4K, the gap is 17 FPS. In both cases, the GPU is the bottleneck. The CPU's role is largely static across these scenarios; it is only at 1080p Low that the CPU can push the GPU to its limit. Below that, the GPU is the limiting factor, and the recorded frame rates reflect that clearly.