Rust

FAQ

Q: Can this PC run Rust at 60 FPS on a 4K display?

A: Yes, but only on Low or Medium settings. At 4K High it averages 55 FPS, and Ultra drops to 42 FPS. Medium is the highest playable preset, delivering 66 FPS.

Q: What is the best 1440p preset for this combo?

A: Ultra runs at an average of 71 FPS, making it the most demanding preset that stays above the 60 FPS threshold. All four presets (Low, Medium, High, Ultra) are playable at this resolution.

Q: How much faster is the GPU compared to its nearest rivals?

A: The RTX 5070’s average benchmark score is 40,377. It sits within 2% of the AMD Radeon Pro 580, the AMD Radeon Pro WX 7100, the AMD Radeon Pro 5300, and the NVIDIA RTX A500 Mobile. The largest gap is a 2% lead over the RTX A500 Mobile.

Q: Where does the CPU rank among all tested processors?

A: The Ryzen 5 4600G sits at the 71st percentile of all CPUs, with an average benchmark score of 17,507. Its nearest rival, the Ryzen 3 PRO 5355GE, scores 17,482, a difference of just 0.1%.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The data suggests the CPU is not a major limiting factor. At 1080p Low, the combo hits 155 FPS, and at 1080p Ultra it still holds 104 FPS. The scaling from Low to Ultra shows a 51 FPS drop, which is typical of GPU load increasing with graphical fidelity.

Q: How does this combo rank in the database for Rust?

A: This pairing ranks 1,050th out of 3,723 tested combinations, placing it in the upper 28% of all recorded configurations for this game.

CPU and GPU Roles

The division of labor between the Ryzen 5 4600G and the RTX 5070 shifts with resolution and preset. At 1080p Low, the system records 155 FPS. Moving to 1080p Ultra, the frame rate drops to 104 FPS, a 33% reduction in performance. This indicates that the GPU is doing most of the work, as the CPU has enough headroom to feed frames even at the lowest settings.

At 1440p, the pattern continues but with a wider spread. Low runs at 137 FPS, while Ultra runs at 71 FPS. The 66 FPS difference between Low and Ultra is larger than the 51 FPS gap at 1080p, which shows the GPU becoming more stressed as pixel count increases.

At 4K, the GPU becomes the dominant factor. Low averages 98 FPS, but Medium falls to 66 FPS and Ultra to 42 FPS. The gap between Low and Ultra is 56 FPS, but the absolute numbers are much lower because the RTX 5070 is filling four times as many pixels as at 1080p. The CPU’s role is reduced to feeding frames quickly enough, which it does; the bottleneck is the GPU’s pixel throughput.

The data shows that resolution scaling is nearly linear in terms of GPU load. At 1080p Medium, the average FPS is 133. At 1440p Medium, it drops to 111 FPS. At 4K Medium, it falls to 66 FPS. This 50% performance penalty from 1440p to 4K is consistent with the 2.25x pixel count increase, meaning the CPU is not introducing a significant bottleneck at any resolution.

The CPU’s single-thread performance matters for Rust’s server-side simulation and rendering draw calls. With a Cinebench R23 single-core score of 1,919, the 4600G is adequate for this title. The multi-core score of 13,593 suggests that even heavily threaded scenes, such as large player bases or complex structures, should not cause the CPU to become the primary constraint.

In short, the GPU is the main driver of performance at 4K and at Ultra presets across all resolutions. The CPU provides enough headroom at 1080p and 1440p to let the GPU scale fully.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays above 60 FPS is Medium, with an average of 66 FPS. Low averages 98 FPS, but Medium offers better visuals while still clearing the 60 FPS threshold. High falls short at 55 FPS, and Ultra is not playable at 42 FPS.

At 2560x1440, all four presets are playable. Ultra is the best choice, averaging 71 FPS. High runs at 94 FPS, Medium at 111 FPS, and Low at 137 FPS. Since Ultra is above 60 FPS, it is the recommended setting for this resolution.

At 1920x1080, Ultra is the clear pick with an average of 104 FPS. High runs at 126 FPS, Medium at 133 FPS, and Low at 155 FPS. Every preset exceeds the playable threshold, so the player can use Ultra without worrying about frame rate dips.

The recorded minimum FPS values for Medium presets show that 4K Medium has a minimum of 56 FPS, which briefly dips below the 60 FPS threshold. However, the average of 66 FPS indicates that these dips are rare and not representative of sustained performance. At 1440p Medium, the minimum is 94 FPS, and at 1080p Medium, the minimum is 113 FPS, both well above the threshold.

Similar Performance Alternatives

The Ryzen 5 4600G’s nearest rivals in the database are the AMD Ryzen 3 PRO 5355GE (average score 17,482, delta 0.1%), the AMD Ryzen 3 8300G (17,614, delta -0.6%), the Intel Core 7 150U (17,395, delta 0.6%), and the Intel Core i3-14100T (17,648, delta -0.8%). These processors are within 1% of the 4600G’s performance, meaning a system with any of these would produce nearly identical frame rates in Rust. The Core i3-14100T is marginally faster, while the Ryzen 3 8300GE is also slightly faster, but the differences are negligible.

The RTX 5070’s nearest rivals are the AMD Radeon Pro 580 (40,318, delta 0.1%), AMD Radeon Pro WX 7100 (40,063, delta 0.8%), AMD Radeon Pro 5300 (40,870, delta -1.2%), and NVIDIA RTX A500 Mobile (39,568, delta 2%). The Radeon Pro 5300 is the closest, being 1.2% faster. The RTX A500 Mobile is 2% slower. All of these cards would deliver within 2% of the RTX 5070’s Rust performance.

For a buyer looking at used or workstation GPUs, these alternatives would provide very similar FPS at the same resolution and preset. However, none of these rivals come with the same feature set as the RTX 5070, such as DLSS 4 or ray tracing support, which are not measured in the benchmark scores but could affect visual quality settings in other games.

The Verdict

Yes, this PC can run Rust. The measured data shows that the system clears the 60 FPS threshold at every resolution with the right settings. At 1080p, all presets run at or above 104 FPS, with Ultra being the highest playable setting. At 1440p, all presets run at or above 71 FPS, with Ultra again being the best. At 4K, only Low and Medium are playable. Medium averages 66 FPS, which is above the threshold, but the minimum FPS of 56 suggests occasional dips below 60. For a locked 4K experience, Low is the safest choice, averaging 98 FPS.

The verdict is clear: the system is fully capable of 1080p and 1440p gaming at maximum settings, and at 4K it offers a playable experience at medium quality. The bottleneck is purely the GPU, which is expected for a 4K resolution. The CPU provides enough headroom for all tested scenarios.

How This Combo Ranks

This specific combination of the Ryzen 5 4600G and the RTX 5070 ranks 1,050th out of 3,723 tested combos in the database for Rust. That places it in the 72nd percentile of all tested configurations, meaning it outperforms roughly 72% of the other CPU and GPU pairings tested. The ranking is driven primarily by the GPU’s strength, as the CPU is only at the 71st percentile of all CPUs. The 4600G is not holding back the RTX 5070 in most cases, as evidenced by the high FPS at 1440p and 1080p. However, at 4K, the GPU is the limiting factor, and the CPU’s lower single-core score could become relevant in CPU-heavy scenes.

The combo rank is respectable for a mid-range CPU paired with a high-end GPU. In the database, this pairing shows that the RTX 5070 can be used with a budget-oriented processor without severe performance losses. The 4600G’s 6 cores and 12 threads are sufficient for Rust’s threading model, and the 8 MB of L3 cache is adequate for the game’s data. The 4Kp result of 42 FPS on Ultra is in line with what would be expected from a GPU that is roughly 1% faster than the Radeon Pro 5300, which would likely deliver similar frame rates.