Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
132 FPS
Ultra 1440p Measured
78 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
46 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 17,035
Graphics Card
Required 28,194
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 61 72 107
1440p QHD 78 103 114 132
1080p Full HD 110 121 129 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 150
1920x1080 Medium 129
1920x1080 Ultra 110
2560x1440 High 103
2560x1440 Low 132
2560x1440 Medium 114
2560x1440 Ultra 78
3840x2160 High 61
3840x2160 Low 107
3840x2160 Medium 72
3840x2160 Ultra 46

Performance Analysis: Rust on Your System

Measured FPS Breakdown

At 3840x2160, the recorded data shows a playable but narrow margin at High settings, with an average of 61 FPS. Dropping to Medium yields 72 FPS on average, with minimums of 61 FPS and maximums of 83 FPS, indicating that frame pacing remains stable even when the scene gets busy. Low settings push the average to 107 FPS, a substantial jump that suggests the GPU is the primary limiter at this resolution. Ultra settings fall below the 60 FPS threshold, averaging only 46 FPS, which makes that preset impractical for smooth gameplay at 4K.

At 2560x1440, the combination breathes much more easily. Low settings average 132 FPS, High settings average 103 FPS, and Medium sits between them at 114 FPS with a minimum of 97 FPS and a maximum of 131 FPS. Ultra settings remain comfortably above 60 FPS with an average of 78 FPS, showing that the CPU and GPU together have enough headroom at this resolution to handle even the heaviest preset. The gap between Low and Ultra is 54 FPS, which indicates that visual quality scaling comes at a noticeable but not prohibitive cost.

At 1920x1080, all presets clear the 60 FPS mark by a wide margin. Low settings average 150 FPS, Medium averages 129 FPS with a minimum of 110 FPS and a maximum of 148 FPS, High averages 121 FPS, and Ultra averages 110 FPS. The spread from Ultra to Low is 40 FPS, which is smaller than at 1440p, suggesting that at 1080p the CPU becomes more of a factor relative to the GPU. The minimum recorded FPS at 1080p Medium, 110 FPS, is higher than the average at 4K High, which underscores how resolution dominates the performance profile here.

FAQ

Q: Can this system run Rust at 4K resolution?

A: Yes, but only up to High settings. The data shows High averaging 61 FPS and Medium averaging 72 FPS, while Ultra drops to 46 FPS. For a consistent 60 FPS experience, High is the ceiling at 3840x2160.

Q: What is the best preset at 1440p for this combination?

A: Ultra is fully playable at 2560x1440, with an average of 78 FPS. This is the highest preset tested, and it stays well above the 60 FPS threshold, so there is no need to compromise on visual quality at this resolution.

Q: How much performance is lost when moving from 1080p to 4K at the same settings?

A: At Ultra settings, the average drops from 110 FPS at 1920x1080 to 46 FPS at 3840x2160, a reduction of 64 FPS. At Medium settings, the drop is from 129 FPS to 72 FPS, a reduction of 57 FPS. The scaling is steep, indicating that resolution is the dominant factor in this game.

Q: Is the RTX 4070 Ti the bottleneck at 1080p?

A: The data suggests the CPU becomes more relevant at 1080p. The difference between Low and Ultra is only 40 FPS at 1920x1080, compared to 54 FPS at 1440p and 61 FPS at 4K. Smaller gaps at lower resolutions imply that the Ryzen 5 3600 limits how much the GPU can stretch its legs.

Q: Does the system ever drop below 60 FPS at playable settings?

A: Only at 4K Ultra, where the average is 46 FPS. At 4K Medium, the minimum recorded is 61 FPS, and at 1440p Medium, the minimum is 97 FPS. At 1080p Medium, the minimum is 110 FPS. No other preset in the measured data falls below 60 FPS.

Q: How does this combo rank among all tested systems for Rust?

A: The combination ranks 963rd out of 3723 tested combos, placing it in the upper 26% of all systems in the database. This is a solid position, though not near the top tier.

How This Combo Ranks

The recorded rank of 963 out of 3723 tested combinations places this system comfortably in the top quartile for Rust. That ranking reflects a hardware pairing that can handle the game at high framerates across most resolutions, but it also shows that there is meaningful headroom above this configuration. The CPU sits at the 71st percentile among all processors, and the GPU at the 84th percentile among all graphics cards, so the graphics card is the stronger component in this pairing.

The rank relative to other combos makes sense given the measured FPS data. At 1080p, the system delivers over 110 FPS at every preset, which aligns with a top-quartile position. At 4K, the system struggles only at Ultra, which is consistent with a mid-to-high tier result rather than an elite one. The gap between the CPU and GPU percentiles, 13 points, hints that the Ryzen 5 3600 may hold back the RTX 4070 Ti in CPU-bound scenarios, particularly at lower resolutions.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 5 3600 is essentially matched by the Intel Core i7-1260P, which scores 0.2% higher in average benchmarks. The Intel Core i5-11400 sits 0.2% lower, and the AMD EPYC 7573X also sits 0.2% lower. The AMD EPYC 7742 is 0.2% higher. These differences are negligible, meaning any of these processors would deliver nearly identical frame rates in Rust when paired with the same GPU. The i5-11400 is a particularly relevant comparison because it targets the same desktop segment and would behave almost indistinguishably in gaming workloads.

For the GPU, the nearest rivals include the NVIDIA GeForce RTX 5090 Mobile, which scores 0.8% lower, and the AMD Radeon Pro 5500 XT, which scores 1.3% lower. The NVIDIA RTX A6000 scores 1.6% higher, and the Intel Arc A730M scores 1.7% lower. These deltas are small, so a system with the RTX 4070 Ti swapped for any of these would produce very similar FPS numbers in Rust. The RTX A6000 would be marginally faster, while the Arc A730M would be slightly slower, but none of these changes would alter the overall playability verdict at any resolution.

CPU and GPU Roles

The data reveals a clear division of labor between the Ryzen 5 3600 and the RTX 4070 Ti across resolutions. At 4K, the GPU dominates the performance picture. The difference between Low and Ultra is 61 FPS (107 to 46), and the Medium preset's minimum of 61 FPS suggests the GPU is working near its limits. The CPU's influence is minimal at this resolution because the rendering load scales heavily with pixel count.

At 1440p, the balance shifts slightly. The gap between Low and Ultra narrows to 54 FPS, and the fact that Ultra still averages 78 FPS indicates that both components have headroom. The minimum at Medium, 97 FPS, is well above the playable threshold, so neither component is clearly saturated. This is the resolution where the pairing feels most balanced.

At 1080p, the CPU starts to show its limits. The spread from Low to Ultra is only 40 FPS, which is the smallest of any resolution. Low settings average 150 FPS, but Ultra only drops to 110 FPS, suggesting that the CPU cannot feed the GPU fast enough to exploit the lower resolution fully. If the CPU were stronger, the Ultra preset would likely show a larger gap from Low, as the GPU would have more frames to render. The measured data implies that upgrading the CPU would yield diminishing returns at 1440p and 4K, but would provide a noticeable boost at 1080p.

The Verdict

Yes, this PC can run Rust. At 3840x2160, the playable settings are High, Low, and Medium, with High being the best preset that stays at or above 60 FPS, averaging 61 FPS. At 2560x1440, all four presets are playable, with Ultra averaging 78 FPS as the best option. At 1920x1080, every preset exceeds 60 FPS comfortably, with Ultra averaging 110 FPS as the best option.

The only configuration that fails the 60 FPS threshold is 4K Ultra, which averages 46 FPS. For gamers who prioritize maximum visual quality at 4K, this system falls short, but for anyone targeting 1440p or 1080p, the experience is smooth across the board. The verdict by resolution is clear: 1080p and 1440p users can max out the settings without concern, while 4K users should stick to High or Medium for a stable framerate.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which averages 61 FPS. Medium is also viable at 72 FPS, but High offers better visuals with only a 11 FPS penalty, making it the recommended choice for 4K.

At 2560x1440, the best preset is Ultra, averaging 78 FPS. This is the highest quality setting tested, and it still leaves a comfortable margin above the 60 FPS threshold, so there is no reason to drop to High or Medium unless aiming for higher refresh rates.

At 1920x1080, Ultra is again the best preset, averaging 110 FPS. This provides the full visual experience while remaining well above 60 FPS, and even the minimums at Medium, 110 FPS, show that the system has substantial headroom at this resolution. For users with high-refresh monitors, dropping to Low would push the average to 150 FPS, but Ultra remains the optimal balance of quality and speed.