Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 43 | 53 | 82 |
| 1440p QHD | 57 | 79 | 89 | 131 |
| 1080p Full HD | 86 | 112 | 131 | 150 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
How This Combo Ranks
The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 3070 Ti ranks 1523 out of 3723 tested combinations for Rust, placing it in the upper portion of the database. This is a solid mid-to-high tier position, but not a top-tier one. The ranking reflects that this combo can handle the game comfortably at most settings, though it does not dominate the absolute highest demands of 4K Ultra.
What this rank means in practice is that there are many faster combinations, but also a large number of slower ones. The combo sits in the 59th percentile of tested configurations, meaning roughly 41% of all tested combos outperform it in Rust. That is a respectable standing for a CPU from 2019 and a GPU from 2021, both of which remain capable for this title. The data indicates the pairing is balanced enough to avoid severe bottlenecks in either direction, which is a key reason it lands where it does.
The rank is driven by the GPU's strong raw performance and the CPU's adequate multi-threaded throughput. Rust is known to scale with both, and this combination delivers a playable experience across most resolutions, as the measured FPS values show. The 1523rd spot out of 3723 is not a statement of weakness; it is a statement of competence without excess. For a game like Rust, where server performance and draw distances matter, this combo is firmly in the "capable" bracket rather than the "extreme" bracket.
CPU and GPU Roles
Looking at the measured FPS across resolutions and presets, the GPU takes the leading role at higher resolutions, while the CPU becomes more relevant at lower resolutions. The data shows a clear pattern: as resolution drops, the FPS gains shrink, indicating that the CPU begins to limit the frame rate.
At 3840x2160, the difference between Low and Ultra is stark. Low delivers 82 FPS, Medium drops to 53.1 FPS, High falls to 43.1 FPS, and Ultra bottoms out at 36.6 FPS. This steep decline with preset quality at 4K is classic GPU-bound behavior. The RTX 3070 Ti is doing the heavy lifting, and its performance ceiling at this resolution is the limiting factor. The CPU has enough headroom here, as shown by the fact that even at Low, the FPS does not jump to extreme levels; it stays at 82, which suggests the GPU is still the primary constraint.
At 2560x1440, the picture shifts. Low hits 131.1 FPS, Medium reaches 88.8 FPS, High manages 79.1 FPS, and Ultra drops to 56.6 FPS. The jump from 4K Low to 1440p Low is nearly 60%, from 82 to 131.1 FPS. This indicates that the GPU is now less stressed, and the CPU is starting to exert more influence. The fact that Low at 1440p is much faster than Low at 4K confirms that pixel count is still a major factor, but the CPU is now able to push higher frame rates when the GPU is not overwhelmed.
At 1920x1080, the CPU's role becomes even more evident. Low delivers 150.1 FPS, Medium reaches 130.6 FPS, High hits 111.8 FPS, and Ultra still manages 85.5 FPS. The gap between Low at 1080p (150.1 FPS) and Low at 1440p (131.1 FPS) is only about 14%, whereas the gap between Low at 1440p and Low at 4K is about 60%. This compression of FPS gains as resolution drops is a textbook sign of CPU limitation. The Ryzen 5 3600, with its 6 cores and 12 threads, is enough to sustain high frame rates, but it caps the maximum output around the 150 FPS mark at 1080p Low.
Preset scaling tells the same story. At 1080p, Ultra (85.5 FPS) is only 43% slower than Low (150.1 FPS). At 4K, Ultra (36.6 FPS) is 55% slower than Low (82 FPS). The larger relative penalty at 4K shows that the GPU is the dominant factor there, while the smaller penalty at 1080p shows the CPU stepping in as the co-limiter. In short, for 4K, the RTX 3070 Ti dictates performance; for 1080p, the Ryzen 5 3600 does. At 1440p, both contribute meaningfully.
FAQ
Q: Can this combo run Rust at 4K with playable frame rates?
A: Yes, but only at Low settings. The measured average FPS at 3840x2160 Low is 82 FPS, which is above the 60 FPS playable threshold. Medium drops to 53.1 FPS, High to 43.1 FPS, and Ultra to 36.6 FPS, all of which fall below 60 FPS.
Q: What is the best preset at 1440p for staying above 60 FPS?
A: High is the most demanding preset that stays above 60 FPS at 2560x1440, with an average of 79.1 FPS. Ultra drops to 56.6 FPS, which is below the playable threshold.
Q: Is Ultra settings playable at 1080p?
A: Yes. At 1920x1080 Ultra, the average FPS is 85.5, which comfortably clears the 60 FPS threshold. This is the highest preset tested and it remains fully playable.
Q: How much faster is 1080p Low compared to 4K Low?
A: 1080p Low averages 150.1 FPS, while 4K Low averages 82 FPS. That is an 83% increase in frame rate when dropping from 4K to 1080p at the same preset, indicating the GPU's workload at 4K is significantly heavier.
Q: Does the CPU hold back the GPU at 1080p?
A: The data suggests it does. At 1080p, Low (150.1 FPS) and Medium (130.6 FPS) show a smaller relative gain over 1440p compared to the gain from 4K to 1440p. This compression points to the Ryzen 5 3600 limiting the maximum frame rate at lower resolutions.
Q: What is the worst-case scenario for this combo in Rust?
A: The worst case is 4K Ultra, which averages 36.6 FPS. This is well below the 60 FPS playable threshold and would result in a noticeably choppy experience. Even 4K Medium at 53.1 FPS is below the threshold, so 4K gaming is restricted to Low settings.
Similar Performance Alternatives
For the CPU, the nearest rivals in the database are all within a narrow band of average scores. The Intel Core i7-1260P scores 17007, just 0.2% below the Ryzen 5 3600's average benchmark score of 17035. The Intel Core i5-11400 scores 17067, which is 0.2% higher. The AMD EPYC 7573X scores 17070, also 0.2% higher, and the AMD EPYC 7742 scores 16998, 0.2% lower. These four chips are effectively interchangeable in terms of overall benchmark performance, meaning any of them would deliver nearly identical frame rates in Rust when paired with the RTX 3070 Ti. The practical takeaway is that the Ryzen 5 3600 is not uniquely positioned; several other CPUs from both Intel and AMD land in the same performance envelope.
For the GPU, the nearest rivals are similarly close. The NVIDIA GeForce RTX 5070 Mobile scores 29928, just 0.1% below the RTX 3070 Ti's average of 29945. The AMD Radeon RX 6800 scores 30095, which is 0.5% higher. The NVIDIA GeForce RTX 2080 Ti scores 29783, 0.5% lower, and the AMD Radeon RX 6700 scores 30433, 1.6% higher. These deltas are all within a couple of percent, so a system using any of these GPUs would produce almost the same FPS in Rust at the same CPU and settings. The RTX 3070 Ti sits in a tight cluster of graphics cards that all deliver comparable performance, so users upgrading or downgrading within this group should expect no meaningful change in gameplay smoothness.
When considering a full combo swap, the combination of a rival CPU and rival GPU would yield a system that behaves nearly identically to the Ryzen 5 3600 plus RTX 3070 Ti. For example, an Intel Core i5-11400 with an AMD Radeon RX 6800 would land within 1% of the measured FPS across all resolutions and presets. This is useful information for anyone building a similar system from available parts.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 82 FPS. Medium drops to 53.1 FPS, which is below the threshold, so 4K users are limited to Low for a smooth experience.
At 2560x1440, the best preset is High, averaging 79.1 FPS. Medium (88.8 FPS) and Low (131.1 FPS) are also above 60 FPS, but High offers the highest visual quality while still clearing the threshold. Ultra falls short at 56.6 FPS.
At 1920x1080, the best preset is Ultra, with an average of 85.5 FPS. This is the highest quality setting tested and it remains fully playable. High (111.8 FPS), Medium (130.6 FPS), and Low (150.1 FPS) also exceed 60 FPS, so 1080p users have the full range of options without sacrificing smoothness.
The pattern is clear: at 1080p, the combo has headroom to spare; at 1440p, High is the ceiling; at 4K, only Low works.
The Verdict
This PC can run Rust, and it does so convincingly at most settings. The recorded data shows that the Ryzen 5 3600 and RTX 3070 Ti clear the 60 FPS playable threshold at all resolutions, but with important caveats.
At 1920x1080, every preset from Low to Ultra is playable, with Ultra averaging 85.5 FPS. This is the sweet spot for this combo. Players can max out the settings and still enjoy a smooth experience, with plenty of headroom above the 60 FPS line.
At 2560x1440, the combo remains strong. High settings deliver 79.1 FPS, which is comfortably above the threshold. Medium and Low are also playable, but Ultra dips to 56.6 FPS, so those wanting the highest quality at 1440p will need to dial back to High.
At 3840x2160, the situation tightens. Only Low settings achieve playable frame rates, at 82 FPS. Medium (53.1 FPS), High (43.1 FPS), and Ultra (36.6 FPS) all fall short of 60 FPS. For 4K gaming, this combo is limited to the lowest preset.
In summary, the verdict is positive: this is a capable Rust machine for 1080p and 1440p gaming, with 1440p High being the best balance of quality and performance. At 4K, it is playable only on Low, which may disappoint those expecting high-fidelity visuals at that resolution. The data indicates that the RTX 3070 Ti is the limiting factor at 4K, while the Ryzen 5 3600 provides sufficient CPU power for lower resolutions. Overall, this combo is a reliable choice for Rust, provided the user adjusts expectations based on resolution.