Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

48%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
137 FPS
Ultra 1080p Measured
62 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
58 FPS
Ultra 4K Measured
25 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 17,035
Graphics Card
Required 28,194
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 25 31 40 58
1440p QHD 43 52 67 95
1080p Full HD 62 78 92 137

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 137
1920x1080 Medium 92
1920x1080 Ultra 62
2560x1440 High 52
2560x1440 Low 95
2560x1440 Medium 67
2560x1440 Ultra 43
3840x2160 High 31
3840x2160 Low 58
3840x2160 Medium 40
3840x2160 Ultra 25

Performance Analysis: Rust on Your System

The AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3060 Ti combination delivers a highly variable experience in Rust, with performance swinging dramatically based on resolution and quality preset. The recorded data shows a system that can comfortably handle 1080p and 1440p gaming, but it struggles to maintain playable frame rates at 4K. This analysis breaks down the measured FPS across all tested configurations, compares the hardware to its nearest rivals, and identifies the optimal settings for each resolution.

Measured FPS Breakdown

The benchmark results for this CPU-GPU pairing in Rust reveal a clear performance hierarchy tied to resolution and settings. At 1920x1080, the system demonstrates its strongest performance. With Low settings, the average FPS reaches 137.3, which is more than double the 60 FPS playable threshold. Moving to Medium settings drops the average to 91.7 FPS, while High settings yield 78.1 FPS. The most demanding preset at this resolution, Ultra, still manages an average of 61.7 FPS, barely clearing the playable threshold. This indicates that 1080p is fully playable across all settings, with Ultra being the only preset that approaches the limit.

Stepping up to 2560x1440, the performance picture changes noticeably. Low settings produce an average of 94.9 FPS, which remains well above the 60 FPS threshold. Medium settings deliver 67 FPS, still comfortably playable, but High settings drop to 51.9 FPS, falling below the playable mark. Ultra settings at 1440p yield just 43.3 FPS, indicating a significant performance hit as the resolution increases. The data shows that only Low and Medium presets are viable at this resolution, with Medium being the highest quality option that maintains 60 FPS.

At 3840x2160, the system struggles across the board. Low settings average 57.7 FPS, just under the 60 FPS threshold. Medium settings drop to 39.6 FPS, High settings fall to 30.6 FPS, and Ultra bottoms out at 25 FPS. None of the tested presets at 4K achieve playable frame rates, making this resolution unsuitable for this hardware combination in Rust. The scaling from 1080p to 1440p shows an average drop of roughly 30-40% across settings, while the jump from 1440p to 4K results in even steeper declines, particularly at higher presets.

Similar Performance Alternatives

The CPU and GPU in this system each have nearby rivals according to the database's benchmark scores. The AMD Ryzen 5 3600 sits in a tight cluster of processors. Its average benchmark score is 17035, which places it just 0.2% above the Intel Core i7-1260P (17007) and 0.2% below the Intel Core i5-11400 (17067). The AMD EPYC 7573X (17070) and AMD EPYC 7742 (16998) also fall within a 0.2% margin of the Ryzen 5 3600. This means that in CPU-bound scenarios, swapping to any of these processors would yield nearly identical performance, with differences well within measurement noise.

For the GPU, the NVIDIA GeForce RTX 3060 Ti has an average benchmark score of 16129. The AMD Radeon RX 9060 sits 0.7% higher at 16014, while the AMD Radeon Pro 5600M (16351) and AMD Radeon RX 5700 XT (16361) are both 1.4% higher. The AMD Radeon R9 370X (15862) is 1.7% lower. These deltas are small, suggesting that in GPU-bound scenarios, particularly at higher resolutions, users would see very similar frame rates with any of these alternatives. The RX 5700 XT, being the closest match in terms of performance, would likely produce nearly identical FPS numbers in Rust.

When considering the full system, the CPU and GPU rivals matter differently depending on the resolution. At 1080p with Low settings, the CPU becomes more relevant, and the Ryzen 5 3600's close parity with the Core i5-11400 means either would handle the workload similarly. At 4K with Ultra settings, the GPU dominates the bottleneck, and the RX 5700 XT's 1.4% score advantage would translate to a negligible FPS difference, likely less than one frame per second.

CPU and GPU Roles

The measured data shows how the balance between CPU and GPU shifts across resolutions and presets in Rust. At 1920x1080, the system achieves 137.3 FPS on Low settings, which is 49% higher than the 94.9 FPS at 2560x1440 on the same preset. This large drop indicates that even at Low settings, the GPU is becoming a limiting factor as resolution increases. The CPU, with its 6 cores and 12 threads, has enough headroom at 1080p Low to push frame rates high, but the GPU cannot sustain that performance at higher pixel counts.

The scaling from Medium to High settings at each resolution provides further insight. At 1080p, Medium yields 91.7 FPS and High yields 78.1 FPS, a 15% reduction. At 1440p, Medium drops to 67 FPS and High to 51.9 FPS, a 23% reduction. At 4K, Medium produces 39.6 FPS and High produces 30.6 FPS, a 23% drop. The consistent percentage reduction across resolutions suggests that the GPU is the primary constraint when moving between Medium and High presets, as the CPU can handle the additional draw calls without becoming a bottleneck.

The Ultra preset tells a different story. At 1080p, Ultra achieves 61.7 FPS, which is 21% below High. At 1440p, Ultra drops to 43.3 FPS, 17% below High. At 4K, Ultra falls to 25 FPS, 18% below High. The relatively consistent drop from High to Ultra across all resolutions indicates that the GPU is handling the extra visual effects, shadows, and draw distances, while the CPU maintains its role without introducing additional frame time spikes. The data suggests that the Ryzen 5 3600 is sufficient for this game at all tested settings, and the RTX 3060 Ti is the component that determines whether the system can hit 60 FPS.

The Verdict

The question of whether this PC can run Rust has a nuanced answer based on the recorded measurements. At 3840x2160, the answer is no. None of the four tested presets, Low, Medium, High, or Ultra, achieve an average FPS of 60 or higher. The closest is Low at 57.7 FPS, which falls short of the playable threshold. This resolution is not viable for this hardware in Rust.

At 2560x1440, the system can run the game, but only with specific settings. The verdict data lists Low and Medium as playable, with Medium being the best option at 67 FPS. High settings drop to 51.9 FPS and Ultra to 43.3 FPS, both below the 60 FPS threshold. For a smooth experience at 1440p, users must stick to Medium or lower.

At 1920x1080, the system fully delivers. All four presets, Low, Medium, High, and Ultra, are playable. The best settings option is Ultra, which averages 61.7 FPS, just above the 60 FPS threshold. This makes 1080p the only resolution where the user can max out the game's quality settings and still maintain playable performance. The data clearly shows that this PC is a 1080p machine for Rust, with 1440p possible only at reduced settings.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that maintains an average FPS of 60 or higher. At 1920x1080, that preset is Ultra, with an average of 61.7 FPS. This is the highest quality setting available in the game, and the system just barely clears the playable threshold. Users who want a larger safety margin could drop to High at 78.1 FPS, but Ultra remains technically playable.

At 2560x1440, the best settings option is Medium, delivering 67 FPS. This provides a comfortable buffer above the 60 FPS threshold while still offering improved visual quality over Low, which runs at 94.9 FPS. High settings at 51.9 FPS and Ultra at 43.3 FPS are not recommended, as they fall below the playable mark.

At 3840x2160, the verdict data shows no playable settings. The best case scenario is Low at 57.7 FPS, which is 2.3 FPS short of the threshold. This means that even the lowest quality preset cannot sustain 60 FPS at 4K, making this resolution impractical for this hardware in Rust. Users should avoid 4K entirely or consider lowering the resolution to 1440p.

FAQ

Q: Can this PC run Rust at 1080p with max settings?

A: Yes. The recorded data shows Ultra settings at 1920x1080 produce an average of 61.7 FPS, which clears the 60 FPS playable threshold.

Q: What is the best settings preset for 1440p?

A: Medium settings at 2560x1440 average 67 FPS, making it the highest quality option that stays at or above 60 FPS. High settings drop to 51.9 FPS, which is below the playable threshold.

Q: Is 4K playable with this CPU and GPU combination?

A: No. None of the tested presets at 3840x2160 reach 60 FPS. Low settings average 57.7 FPS, which is the closest, but still falls short of the playable mark.

Q: How does the Ryzen 5 3600 compare to nearby CPUs?

A: The Ryzen 5 3600 has an average benchmark score of 17035. It is 0.2% ahead of the Intel Core i7-1260P and 0.2% behind the Intel Core i5-11400, putting all three in a tight performance cluster.

Q: What GPU rivals would perform similarly to the RTX 3060 Ti?

A: The AMD Radeon RX 5700 XT has an average score of 16361, which is 1.4% higher than the RTX 3060 Ti. The AMD Radeon Pro 5600M is also 1.4% higher, while the AMD Radeon RX 9060 is 0.7% higher.

Q: How much faster is Low settings compared to Ultra at 1080p?

A: At 1920x1080, Low settings average 137.3 FPS, while Ultra averages 61.7 FPS. Low is approximately 123% faster than Ultra at this resolution.

How This Combo Ranks

The database ranks this specific combination of AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3060 Ti at position 2540 out of 3723 tested combos for Rust. This places the system in the lower portion of the overall ranking, around the 32nd percentile of all tested configurations. The ranking reflects that while the system can handle 1080p and modest 1440p gaming, it falls behind many other combinations that achieve higher frame rates at more demanding settings.

The position in the rankings is consistent with the measured performance data. The system's inability to reach 60 FPS at 4K and its limited 1440p options (only Medium and below) contribute to its placement. Many competing combinations with more powerful GPUs or newer CPUs would rank higher, while systems with weaker hardware would fall below. The 68% of tested combos that rank above this one likely include configurations with higher-end GPUs, such as the RTX 3070 or RTX 3080, or CPUs with stronger single-thread performance, which Rust tends to favor.

For users with this specific hardware, the ranking underscores the importance of playing at 1080p to get the best experience. The system is not a top-tier performer in Rust, but it occupies a solid mid-range position. The data indicates that upgrading either the CPU or GPU would improve the ranking, but the GPU would likely be the better upgrade path, as the RTX 3060 Ti is the primary bottleneck at higher resolutions.