Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 12 | 15 | 18 | 27 |
| 1440p QHD | 20 | 26 | 30 | 45 |
| 1080p Full HD | 28 | 37 | 44 | 66 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 5 3600 paired with the NVIDIA GeForce GTX 1650 produces a clear performance profile in Rust, one defined by resolution limits and a single playable configuration at 1080p. The recorded data shows a system that can handle the game at its lowest settings in Full HD, but falls short of the 60 FPS threshold at higher resolutions. The measured FPS figures, combined with the component benchmark scores, paint a picture of a balanced but entry-level setup where the GPU becomes the primary constraint as resolution increases.
Measured FPS Breakdown
At 3840x2160, the recorded average frame rates are consistently low across all presets. The High preset yields an average of 15 FPS, while Low improves to 27 FPS. Medium produces an average of 18 FPS with a minimum of 15 FPS and a maximum of 21 FPS, and Ultra drops to 12 FPS. None of these averages approach the 60 FPS playable threshold, and the frame times suggest a heavily GPU-bound scenario where even the lowest settings cannot lift performance into a comfortable range.
Moving to 2560x1440, the averages increase but remain below playability. High averages 26 FPS, Low reaches 45 FPS, Medium averages 30 FPS with a range of 26 to 35 FPS, and Ultra sits at 20 FPS. The jump from 2160p to 1440p improves performance by roughly 70% to 80% depending on the preset, yet the best case, Low at 45 FPS, still misses the 60 FPS target by a significant margin. The minimum and maximum values for Medium show consistency, with no severe frame drops, but the overall level is insufficient for smooth gameplay.
At 1920x1080, the data reveals the only playable configuration. Low averages 66 FPS, clearing the 60 FPS threshold with a modest margin. High averages 37 FPS, Medium averages 44 FPS with a range of 38 to 51 FPS, and Ultra averages 28 FPS. The progression from Low to Ultra shows a steep decline: Low to Medium is a 22 FPS drop, Medium to High is a 7 FPS drop, and High to Ultra is a 9 FPS drop. The 66 FPS at Low is the single instance where the system meets the playable threshold, and it does so without recorded minimum or maximum values, indicating stable performance within that preset.
CPU and GPU Roles
The benchmark data indicates that the GPU is the dominant factor in Rust at all tested resolutions. The scaling between 2160p and 1440p shows an average improvement of approximately 75% across presets, while the scaling from 1440p to 1080p yields a further 55% to 65% improvement. This pattern is typical of a GPU-bound workload: as pixel count decreases, the render load drops, and the GPU can produce more frames. The CPU, an AMD Ryzen 5 3600 with 6 cores and 12 threads, does not appear to bottleneck these results, as its benchmark scores, such as a Cinebench R23 multi-core score of 15045 and a single-core score of 2124, indicate sufficient headroom for a game like Rust.
The GPU, a GeForce GTX 1650 with 4 GB of GDDR5 memory and a 128-bit bus, shows a PassMark G3D score of 7880, which places it at the 40th percentile among all GPUs. This modest compute capability aligns with the observed FPS drops at higher resolutions. At 1080p Low, the GPU can sustain 66 FPS, but at 1440p Low it falls to 45 FPS, a 32% reduction, and at 2160p Low it drops to 27 FPS, a further 40% reduction. The CPU's role becomes more apparent at 1080p, where the difference between Low and Ultra is 38 FPS, but even at Ultra, the CPU is not the limiting factor, as the GPU is still the weaker component.
The preset scaling also highlights the GPU's influence. At 1080p, Low to Medium costs 22 FPS, Medium to High costs 7 FPS, and High to Ultra costs 9 FPS. This non-linear scaling suggests that certain settings, likely textures and shadow quality, impose a heavy load on the 4 GB memory buffer and the 896 shading units. At 1440p and 2160p, the preset differences shrink in absolute terms, with Low to Ultra spanning 25 FPS at 1440p and 15 FPS at 2160p, indicating that the GPU is saturated regardless of settings.
How This Combo Ranks
The combination of the Ryzen 5 3600 and the GTX 1650 ranks 3596 out of 3723 tested combos for Rust, placing it in the bottom 4% of the database. This rank reflects the GPU's limitations more than the CPU's capabilities. The CPU alone sits at the 71st percentile among all CPUs, with an average benchmark score of 17035, while the GPU sits at the 40th percentile with an average score of 7472. The low combo rank in this game is driven by the GPU's inability to sustain high frame rates at demanding settings, which is consistent with the measured FPS data.
In the context of Rust specifically, the rank indicates that most other tested combinations deliver better performance. The 3723 combos in the database include systems with more powerful GPUs, and the GTX 1650's position at the 40th percentile means a majority of GPUs outperform it. The CPU's high percentile does not compensate for this, as Rust's rendering load falls primarily on the GPU. The result is a combo that is playable only at the lowest settings and lowest resolution, a niche that few other systems occupy.
The Verdict
This PC can run Rust, but only under specific conditions. The verdict by resolution is unambiguous: at 3840x2160, no settings achieve 60 FPS, with the best average being 27 FPS at Low. At 2560x1440, the same applies, with the best average being 45 FPS at Low. At 1920x1080, only the Low preset clears the threshold, averaging 66 FPS. The playable settings list for 1080p contains exactly one entry: Low. Medium, High, and Ultra all fall short, averaging 44, 37, and 28 FPS respectively.
For a user targeting 60 FPS, the system is limited to 1080p with Low settings. This configuration provides a playable experience, but with no headroom for higher presets. At 1440p and 2160p, the system is not viable for smooth gameplay, as even the lowest settings cannot reach 60 FPS. The data shows a clear boundary: the GTX 1650 has enough capability for 1080p Low, but nothing beyond that in this title.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU and GPU, the data provides context for what other hardware would behave similarly. The Ryzen 5 3600 has an average benchmark score of 17035, with the Intel Core i7-1260P scoring 17007, a 0.2% difference, and the Intel Core i5-11400 scoring 17067, a -0.2% difference. The AMD EPYC 7573X and EPYC 7742 also fall within 0.2% of the Ryzen's score. For gaming in Rust, these CPUs would produce nearly identical frame rates, as the GPU remains the bottleneck.
The GTX 1650 has an average benchmark score of 7472, with the AMD Radeon HD 8850M scoring 7447, a 0.3% difference, and the Intel UHD Graphics 750 scoring 7441, a 0.4% difference. The AMD Radeon R7 350 scores 7425, a 0.6% difference, and the Intel Arc A310 scores 7550, a -1% difference. In Rust, these GPUs would deliver similar performance to the GTX 1650, meaning they would also struggle to exceed 60 FPS at 1080p beyond Low settings. The Arc A310, with a slightly higher score, might edge out the GTX 1650 by a frame or two, but the overall playability would remain the same.
FAQ
Q: What is the best average FPS this combo achieves in Rust?
A: The highest recorded average is 66 FPS, achieved at 1920x1080 with Low settings.
Q: Can this system run Rust at 2560x1440?
A: No, the best average at 1440p is 45 FPS at Low settings, which is below the 60 FPS playable threshold.
Q: How does the GTX 1650 compare to its nearest rival, the Intel Arc A310?
A: The GTX 1650 has an average benchmark score of 7472, while the Arc A310 scores 7550, a -1% difference, meaning the Arc A310 is slightly faster.
Q: What is the CPU's percentile ranking among all CPUs?
A: The Ryzen 5 3600 sits at the 71st percentile, with an average benchmark score of 17035.
Q: Which preset at 1920x1080 is the only playable option?
A: The Low preset is the only one that clears 60 FPS, averaging 66 FPS. Medium averages 44 FPS, High 37 FPS, and Ultra 28 FPS.
Q: What is the combo's rank in the database for Rust?
A: It ranks 3596 out of 3723 tested combos, placing it in the bottom 4% of systems tested for this game.
Best Settings per Resolution
At 3840x2160, no preset achieves 60 FPS, so there is no recommended setting. The best average is 27 FPS at Low, but this is far from playable. At 2560x1440, the same applies: no preset reaches 60 FPS, with Low averaging 45 FPS as the best case. At 1920x1080, the most demanding preset that stays at or above 60 FPS is Low, which averages 66 FPS. This is the only configuration in the entire dataset that meets the playable threshold. Medium, High, and Ultra all fall below 60 FPS, with averages of 44, 37, and 28 FPS respectively, so users must accept Low settings to maintain smooth gameplay at 1080p.