Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 21 | 27 | 32 | 44 |
| 1440p QHD | 31 | 45 | 53 | 79 |
| 1080p Full HD | 51 | 64 | 75 | 110 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
Measured FPS Breakdown
The recorded data for Rust with this AMD Ryzen 5 3600 and NVIDIA GeForce GTX 1070 combination covers twelve distinct configurations, spanning four quality presets across three resolutions. The measurements provide average FPS only; no minimum or maximum frame data was captured in the database.
At 1920x1080, the results show a clear gradient across presets. Low settings deliver 110.3 FPS average, which is the highest recorded value for this combo at any resolution or preset. Medium settings produce 74.9 FPS, while High settings drop to 64.3 FPS. Ultra settings are the only 1080p preset that fails to clear the 60 FPS threshold, landing at 50.8 FPS average. The step from High to Ultra represents a 13.5 FPS drop, the largest single-preset regression at this resolution.
Moving to 2560x1440, the performance curve shifts downward substantially. Low settings still manage a comfortable 78.8 FPS average, making it the only 1440p preset above the playable threshold. Medium settings fall to 52.9 FPS, which is below 60 FPS but still within a range many users might consider borderline. High settings average 44.9 FPS, and Ultra drops to 30.6 FPS. The difference between Low and Ultra at 1440p is 48.2 FPS, showing that this resolution places significant stress on the hardware when quality settings are raised.
At 3840x2160, the picture is much more constrained. The highest recorded average is 44.2 FPS on Low settings. Medium averages 31.6 FPS, High averages 27.1 FPS, and Ultra falls to 21.2 FPS. None of the 4K presets reach 60 FPS, and even the best case at Low is more than 15 FPS short of the playable threshold. The gap between Low and Ultra at 4K is 23.0 FPS, a narrower absolute spread than at 1440p, but the overall performance ceiling is far lower.
Comparing across resolutions, the 1080p Low preset at 110.3 FPS is 31.5 FPS higher than 1440p Low at 78.8 FPS, which in turn is 34.6 FPS higher than 4K Low at 44.2 FPS. For the High preset, 1080p at 64.3 FPS drops to 44.9 FPS at 1440p (a 19.4 FPS loss) and then to 27.1 FPS at 4K (another 17.8 FPS loss). The data indicates that each resolution step costs roughly 20 to 30 FPS depending on the preset, with the largest relative losses occurring between 1440p and 4K.
FAQ
Q: Can this PC run Rust at 60 FPS on a 1920x1080 monitor?
A: Yes. The database shows that at 1080p, Low (110.3 FPS), Medium (74.9 FPS), and High (64.3 FPS) all exceed the 60 FPS playable threshold. The only 1080p preset below 60 FPS is Ultra at 50.8 FPS.
Q: What is the best preset at 2560x1440 that stays above 60 FPS?
A: Only Low settings at 1440p clear the threshold, with an average of 78.8 FPS. Medium falls to 52.9 FPS, which is below the playable mark. High and Ultra are further behind at 44.9 and 30.6 FPS respectively.
Q: Is 4K playable with any settings?
A: No. The recorded data shows no 3840x2160 preset reaches 60 FPS. The highest 4K result is Low at 44.2 FPS, followed by Medium at 31.6 FPS, High at 27.1 FPS, and Ultra at 21.2 FPS. All fall short of the 60 FPS threshold.
Q: How does the Ultra preset compare to High at 1080p?
A: High at 1080p averages 64.3 FPS, while Ultra averages 50.8 FPS. The drop is 13.5 FPS, representing a roughly 21% reduction in average frame rate when moving from High to Ultra. This is the only preset change at 1080p that pushes the average below 60 FPS.
Q: What is the most demanding preset that stays above 60 FPS at 1440p?
A: The verdict data lists Low as the only playable setting at 2560x1440, with an average of 78.8 FPS. There is no headroom to raise settings at this resolution.
Q: How does the 1080p Medium preset compare to the 1440p Medium preset?
A: 1080p Medium averages 74.9 FPS, while 1440p Medium averages 52.9 FPS. The difference is 22.0 FPS, showing a substantial penalty for the higher resolution. The 1080p result is comfortably above 60 FPS, whereas the 1440p result falls below it.
CPU and GPU Roles
The recorded scaling between resolutions and presets reveals which component becomes the limiting factor. Rust is a survival game with substantial world simulation, but the FPS data shows that resolution scaling dominates the performance picture.
At 1920x1080, the GPU is the primary bottleneck at higher presets. The fact that Low runs at 110.3 FPS while Ultra runs at 50.8 FPS indicates that pixel throughput and shader workload are the limiting factors. The CPU is capable of feeding the GPU at 1080p Low, where the average exceeds 100 FPS. The Ryzen 5 3600, with 6 cores and 12 threads, has enough headroom to maintain high frame rates at this resolution when the GPU is not saturated.
At 2560x1440, the GPU workload increases by roughly 78% compared to 1080p (pixel count goes from about 2.07 million to 3.69 million), and the data reflects this. The Low preset still allows 78.8 FPS, which suggests that the GPU is still the limiting factor at that preset. But the gap between Low and Medium at 1440p is 25.9 FPS (78.8 to 52.9). That drop is steeper than the 35.5 FPS drop at 1080p (110.3 to 74.9, but percentage-wise it is a smaller relative drop). The key observation is that at 1440p, even the CPU is not the main constraint because the Low preset does not come close to the 1080p Low numbers. The GPU is the clear bottleneck.
At 3840x2160, the situation is fully GPU-bound. The pixel count is 4 times higher than 1080p and 2.25 times higher than 1440p. The Low preset at 4K averages 44.2 FPS, which is less than half the 1080p Low score. The gap between Low and Ultra at 4K is only 23.0 FPS, which is narrower than at 1440p (48.2 FPS gap between Low and Ultra). This narrowing suggests that at 4K, the GPU is so saturated that even dropping from Ultra to Low does not provide the same relative relief as it does at lower resolutions. The GPU is entirely the limiting factor, and the CPU has no measurable effect on the differences between presets.
The CPU role becomes more relevant at lower resolutions and higher frame rates. At 1080p Low, the 110.3 FPS average suggests that the CPU is capable of sustaining that rate. The Ryzen 5 3600's single-thread and multi-thread performance in the database (Cinebench R23 multicore at 15045, singlecore at 2124) gives it enough headroom for Rust's simulation tasks. But the data does not show any preset where the CPU causes a performance cap below the GPU's capability; the FPS scaling is monotonic with resolution and preset.
In summary, the GPU is the dominant factor for this game in this combo across all measured configurations. The CPU provides adequate support at 1080p, but the GTX 1070 is not powerful enough to push higher resolutions, and the CPU's strengths become irrelevant once the GPU saturates at 1440p and above.
How This Combo Ranks
The database places this Ryzen 5 3600 + GTX 1070 combination at rank 3113 out of 3723 tested combos for Rust. That puts it in the bottom 16.4% of all configured systems in the database for this specific game title. The percentile position reflects a pairing that sits at the lower-middle range of desktop hardware.
To interpret this rank: out of every 100 tested systems, roughly 84 would produce higher average FPS in Rust. The rank is a global measure that includes top-tier CPUs with high-end GPUs, so this result is expected given the GTX 1070's age and the Ryzen 5 3600's mid-range position. The GPU's percentile versus all GPUs is 47, meaning it outperforms about 47% of all GPUs in the database. The CPU's percentile is 71, meaning it outperforms about 71% of all CPUs. The discrepancy shows that the GPU is the limiting component for this specific pairing. The combo rank being much lower than the CPU percentile suggests that in Rust, the GPU bottleneck pulls the overall rank down significantly.
The database shows that the CPU alone is a solid mid-range part, but the GPU is near the median. When combined for Rust, the pairing lands in the lower quartile of tested combos. The recorded FPS at 1080p High (64.3 FPS) is just barely above the 60 FPS playable threshold, which explains why the combo rank is not higher: many other combos can handle 1080p Ultra or 1440p High with ease.
Similar Performance Alternatives
For the CPU, the nearest rivals in the database are all within 0.2% of its average benchmark score. The AMD Ryzen 5 3600 has an average benchmark score of 17035. The Intel Core i7-1260P scores 17007, which is 0.2% lower. The Intel Core i5-11400 scores 17067, which is 0.2% higher. Two AMD EPYC server parts, the EPYC 7573X and EPYC 7742, also sit within 0.2% at 17070 and 16998 respectively. In gaming, the i5-11400 is a direct desktop alternative that would behave nearly identically in Rust, as the CPU is not the main constraint. The i7-1260P is a mobile chip, but its matching score suggests similar single-thread performance for Rust's logic.
For the GPU, the nearest rivals show a spread of less than 1%. The GTX 1070's average score is 9780. The AMD FirePro W5000 scores 9803, which is 0.2% higher. The NVIDIA Quadro M2000M scores 9832, which is 0.5% higher. The NVIDIA Tesla M10 scores 9724, which is 0.6% lower. The NVIDIA Tesla C2070 scores 9716, which is 0.7% lower. In gaming terms, these professional and mobile GPUs are not direct consumer alternatives, but the extremely small deltas mean that in synthetic benchmarks they are virtually identical. For actual gaming, the GTX 1070 is a consumer card, but the database does not list any desktop consumer alternatives within the nearest rivals.
The practical takeaway: if a user has an Intel Core i5-11400 and a GTX 1070, the Rust performance would be nearly the same as this combo, because the two CPUs are within 0.2% in average score, and the GPU is the same. Similarly, any system with a GPU scoring around 9700 to 9800 in the database's GPU benchmark would produce almost identical FPS numbers in Rust, provided the CPU does not become a bottleneck.
The Verdict
The database's verdict is clear: this PC can run Rust at 60 FPS, but only under specific conditions. At 1920x1080, the playable settings are High, Low, and Medium. The best preset that stays above 60 FPS is High, with an average of 64.3 FPS. At 2560x1440, only Low settings clear the threshold, with an average of 78.8 FPS. At 3840x2160, no settings are playable; the highest average is 44.2 FPS at Low.
The verdict data lists no playable settings for 4K, and the best settings for 4K are listed as null, confirming that the 60 FPS threshold cannot be reached at any preset. For 1440p, the best settings that reach 60 FPS are Low at 78.8 FPS. For 1080p, the best settings are High at 64.3 FPS.
This means a user on a 1080p monitor can select High settings and expect playable frame rates, with a small margin above the threshold. Moving to Medium provides more headroom at 74.9 FPS, and Low gives a very comfortable 110.3 FPS. At 1440p, the user must accept Low settings, and even then the margin is roughly 18 FPS above 60 FPS. For 4K, the PC is not suitable for this game, as even Low settings produce an average below 45 FPS.
Best Settings per Resolution
For each resolution, the most demanding preset that stays at or above 60 FPS average is listed below. The database uses a playable threshold of 60 FPS.
1920x1080: The best settings that maintain 60 FPS are High, with an average of 64.3 FPS. Medium runs at 74.9 FPS and Low at 110.3 FPS, but High offers the highest visual quality while still staying above the threshold. Ultra at 50.8 FPS does not qualify.
2560x1440: The best settings are Low, with an average of 78.8 FPS. Medium at 52.9 FPS falls short of 60 FPS, so there is no room for higher quality presets at this resolution.
3840x2160: No preset reaches 60 FPS. The database records the best 4K result as Low at 44.2 FPS, but this is below the playable threshold, so no recommended settings are given. The verdict fields for 4K list no best settings and no average FPS at best.
For someone who values frame rate over visuals, the 1080p Low preset offers the highest average at 110.3 FPS, while 1080p High is the most demanding preset that still meets the 60 FPS standard. At 1440p, the choice is binary: use Low or lower the resolution to 1080p for higher quality. At 4K, the only path to 60 FPS is to reduce resolution, as no settings change can bridge the gap.