Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 54 | 69 | 96 |
| 1440p QHD | 72 | 95 | 100 | 116 |
| 1080p Full HD | 96 | 109 | 111 | 132 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The pairing of a six-core Ryzen 5 2600 with a Radeon RX 7900 XT is an unusual one: a launch MSRP of $199 on the CPU side and 899 USD on the GPU side, a gap of roughly a generation and a market segment between them. The question the database measurements raise is straightforward: does Rust, a survival title released in early 2018, care about that imbalance, or does it lean almost entirely on the graphics card? The recorded data suggests the latter, at least at higher resolutions, though the CPU's percentile placement of 75 against all CPUs in the database hints that the processor is no slouch in the broader ranking either.
Best Settings per Resolution
The database applies a 60 FPS playable threshold, and at every resolution there is at least one preset that clears it.
At 1920x1080, the answer is generous: even Ultra settings average 96 FPS, so Ultra is the best preset at this resolution, comfortably above the threshold with more than half a margin to spare. Dropping to Medium buys a further lift to 111.1 FPS, and Low reaches 132.2 FPS, but there is no need to go below Ultra here.
At 2560x1440, Ultra again qualifies as the best setting, averaging 71.8 FPS. That is a meaningful result: the highest preset at the most popular enthusiast resolution stays above 60 FPS on average, though the margin is slimmer, roughly a dozen frames of headroom.
At 3840x2160, the picture tightens. Ultra averages 45 FPS, below the threshold. High averages 54.4 FPS, also below. Medium is the most demanding preset that stays at or above 60 FPS, averaging 68.7 FPS. Low pushes further to 96.4 FPS, but Medium is the sweet spot that preserves image quality while remaining playable.
CPU and GPU Roles
Which component limits Rust on this combo? The scaling data offers a clear narrative.
From 1920x1080 to 2560x1440 at Ultra, average FPS falls from 96 to 71.8. That is a substantial drop driven purely by resolution, which is the signature of a GPU-bound scenario: if the CPU were the limiter, raising resolution would barely change the frame rate. From 2560x1440 to 3840x2160 at Ultra, the average falls again to 45. The pattern repeats at High (108.8, 95.3, 54.4) and at Low (132.2, 116, 96.4).
There is, however, an interesting compression at the low end. Between Low and Medium at 1920x1080, the difference is only 132.2 versus 111.1 FPS, and Medium to High is 111.1 versus 108.8, a gap of barely two frames. That plateau suggests the Ryzen 5 2600, with its 157.3 Cinebench R15 single-core score and 2239 PassMark single-thread result, begins to impose a ceiling around the low-to-mid 110s at 1080p. In other words, the CPU sets the maximum frame rate achievable, and the GPU determines how much of that ceiling survives at higher settings and resolutions.
At 1440p and 4K, the GPU dominates entirely. The spread between Low and Ultra widens dramatically at 3840x2160, from 96.4 down to 45 FPS, while the absolute 1080p numbers cluster together. So the practical answer: the RX 7900 XT is the component that matters at 1440p and 4K, and the Ryzen 5 2600 becomes the marginal constraint only when chasing triple-digit frame rates at 1080p.
Similar Performance Alternatives
Looking at the CPU's nearest rivals in the database, the Ryzen 5 2600 (average benchmark score 21484) sits within striking distance of several interesting chips. The Intel Core Ultra 5 228V averages 21440, a delta of just 0.2 percent, effectively identical in aggregate performance. The Intel Core i9-11900H averages 21367, 0.5 percent behind. The Intel Xeon D-1746TER is marginally ahead at 21635, a delta of -0.7 percent, and the AMD EPYC 9454 averages 21223, 1.2 percent below. Any of these processors would deliver a broadly similar CPU-side experience in Rust, assuming the same graphics card.
On the GPU side, the rival list is more curious. The RX 7900 XT carries an average benchmark score of 13745 and a percentile of 55 against all GPUs. Its nearest rivals include the AMD Radeon 660M at 13812 (delta -0.5 percent), the NVIDIA RTX A2000 Mobile at 13821 (delta -0.5 percent), and the AMD Radeon RX 570X at 13871 (delta -0.9 percent), along with the newer Radeon RX 9070 XT at 13543 (delta 1.5 percent). Judged purely by the aggregate score, these cards cluster tightly together, and a system built around any of them would be expected to post Rust frame rates in the same neighborhood as the measurements recorded here. Whether that holds in every title is a different question, but within this database's scoring, the grouping is remarkably tight, all within 1.5 percent.
The Verdict
Yes, this PC can run Rust, and in most configurations it can run it well.
At 1920x1080, every preset tested clears 60 FPS: Low at 132.2, Medium at 111.1, High at 108.8, and Ultra at 96. At 2560x1440, the situation is the same: all four presets are playable, with Ultra at 71.8 FPS as the best setting, followed by High at 95.3, Medium at 99.8, and Low at 116. At 3840x2160, only Low (96.4 FPS) and Medium (68.7 FPS) clear the threshold; High at 54.4 and Ultra at 45 do not.
The practical takeaway: for 1080p and 1440p gaming, there is no compromise required, Ultra is on the table at both. For 4K, a Medium preset is the ceiling for a 60 FPS experience, and players who insist on High or Ultra at 4K will need different hardware or must accept sub-60 averages.
Measured FPS Breakdown
All figures below are measured averages from the database; minimum and maximum frame rates were not recorded for these runs.
At 1920x1080:
- Low: 132.2 FPS average
- Medium: 111.1 FPS average
- High: 108.8 FPS average
- Ultra: 96 FPS average
At 2560x1440:
- Low: 116 FPS average
- Medium: 99.8 FPS average
- High: 95.3 FPS average
- Ultra: 71.8 FPS average
At 3840x2160:
- Low: 96.4 FPS average
- Medium: 68.7 FPS average
- High: 54.4 FPS average
- Ultra: 45 FPS average
A few observations worth flagging. The Medium-to-High delta at 1080p is only 2.3 FPS (111.1 to 108.8), which reinforces the CPU-ceiling interpretation. The jump from High to Ultra costs more at every resolution, roughly 12.8 FPS at 1080p, 23.5 FPS at 1440p, and 9.4 FPS at 4K. Interestingly, the Low preset degrades gracefully with resolution: 132.2 to 116 to 96.4, a smaller relative drop than any other preset, which suggests the RX 7900 XT has raw pixel throughput to spare when visual effects are stripped back, with its 800 GB/s of memory bandwidth and 20 GB of GDDR6 keeping texture and buffer demands well covered even at 4K.
FAQ
Q: Can the Ryzen 5 2600 and RX 7900 XT run Rust at 4K?
A: Yes, but not at maximum settings. At 3840x2160, Low averages 96.4 FPS and Medium averages 68.7 FPS, both above the 60 FPS threshold. High (54.4 FPS) and Ultra (45 FPS) fall short.
Q: What is the best settings preset for 1440p?
A: Ultra. It averages 71.8 FPS at 2560x1440, clearing the 60 FPS threshold while delivering the highest image quality. All four presets are playable at this resolution.
Q: Does the CPU bottleneck this setup in Rust?
A: Only at 1080p and only at the top of the frame-rate range. The narrow gap between Medium (111.1) and High (108.8) at 1920x1080 points to a processor ceiling near the low 110s. At 1440p and 4K, frame rates scale with resolution and settings, indicating the GPU is the dominant factor.
Q: How much performance is lost going from 1080p Ultra to 4K Ultra?
A: Average FPS drops from 96 to 45, slightly more than half, which is consistent with the GPU bearing the rendering load at the highest preset.
Q: What CPUs perform similarly to the Ryzen 5 2600?
A: Within the database, the Intel Core Ultra 5 228V (0.2 percent delta), Intel Core i9-11900H (0.5 percent), Intel Xeon D-1746TER (-0.7 percent), and AMD EPYC 9454 (1.2 percent) all post aggregate scores within a narrow band of the 2600's 21484.
Q: Is 60 FPS achievable at every resolution tested?
A: Yes. At each of the three resolutions, at least one preset averages at or above 60 FPS: Ultra at 1080p (96), Ultra at 1440p (71.8), and Medium at 4K (68.7).
How This Combo Ranks
Out of 3723 hardware combinations tested in Rust within the database, the Ryzen 5 2600 plus RX 7900 XT pairing ranks 1304. That places it in the top half of all tested combos, but not near the elite tier, which matches the on-the-ground results: strong 1080p and 1440p performance with a capped 4K experience.
Is that ranking consistent with the components' individual standings? Largely, yes. The CPU sits at the 75th percentile against all CPUs, and the GPU at the 55th percentile against all GPUs, though the GPU's aggregate score of 13745 clusters it within 1.5 percent of a varied set of rivals, from integrated-class parts to the newer RX 9070 XT. The combo ranking suggests Rust rewards this configuration reasonably well despite the age gap between a 2018 six-core processor and a 2022 flagship-class graphics card. For a survival game that dates to the same year as the CPU itself, the data shows a system that still clears the playability bar at every resolution, provided settings are chosen sensibly at 4K.