Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Roblox
Sandbox 2006

Roblox

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
581 FPS
Ultra 1080p Measured
475 FPS

1440p (2K / QHD)

Low 1440p Measured
486 FPS
Ultra 1440p Measured
317 FPS

4K (Ultra HD)

Low 4K Measured
275 FPS
Ultra 4K Measured
179 FPS
1.9ms Frame Time
3ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,464
Your CPU 14,185
Graphics Card
Required 26,947
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 179 221 250 275
1440p QHD 317 391 442 486
1080p Full HD 475 539 563 581

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 539
1920x1080 Low 581
1920x1080 Medium 563
1920x1080 Ultra 475
2560x1440 High 391
2560x1440 Low 486
2560x1440 Medium 442
2560x1440 Ultra 317
3840x2160 High 221
3840x2160 Low 275
3840x2160 Medium 250
3840x2160 Ultra 179

Performance Analysis: Roblox on Your System

Roblox is a sandbox title that scales heavily with both CPU and GPU horsepower, and the combination of an Intel Core i5-10400F with an NVIDIA GeForce RTX 5090 delivers exceptional frame rates across all tested resolutions. The data shows a system that never approaches the 60 FPS playability threshold, even at the most demanding preset available. At 4K, the average frame rate at Ultra settings is 179 FPS, which is nearly three times the playability threshold. The headroom is so substantial that the most visually demanding settings can be enabled without any concern for performance drops.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 179 FPS. This is the highest quality setting available in the test suite and the system clears the 60 FPS threshold with a wide margin. The recorded data shows that High settings deliver 221 FPS, Medium delivers 250 FPS, and Low delivers 275 FPS, but since Ultra is already far above the playable threshold, it is the recommended choice for maximum visual fidelity.

At 2560x1440, Ultra settings again qualify as the best option, with an average frame rate of 317 FPS. The scaling from 4K to 1440p shows a significant performance uplift, with the Ultra preset gaining roughly 77% more average FPS. High settings at this resolution reach 391 FPS, Medium reaches 442 FPS, and Low reaches 486 FPS, all of which are far beyond what is needed for smooth gameplay. The data indicates that there is no reason to lower settings below Ultra at this resolution.

At 1920x1080, the same pattern holds, with Ultra settings delivering an average of 475 FPS. This is the highest average frame rate for the Ultra preset across all three resolutions, and it is more than seven times the 60 FPS threshold. High settings reach 539 FPS, Medium reaches 563 FPS, and Low reaches 581 FPS. The measurements show that even at the lowest resolution, the system is heavily bottlenecked by something other than raw GPU throughput, as the differences between presets are relatively small compared to the resolution scaling.

CPU and GPU Roles

The data reveals that the NVIDIA GeForce RTX 5090 is the dominant component in this pairing, but the Intel Core i5-10400F is not a limiting factor at any resolution. The frame rate scaling from 1920x1080 to 2560x1440 shows an average reduction of about 18% across all presets, while scaling from 2560x1440 to 3840x2160 shows a further reduction of about 38% across all presets. This pattern indicates that the GPU is handling the increased pixel workload efficiently, but the CPU is still able to feed it with enough data.

At 1920x1080, the differences between presets are compressed. Low settings average 581 FPS, while Ultra settings average 475 FPS, a spread of about 18%. This suggests that the CPU is beginning to limit performance, as the GPU is not being fully utilized at lower settings. The i5-10400F has a passmark single-thread score of 2541 and a passmark multithread score of 12115, which places it in the 68th percentile of all CPUs. Its 3dmark single-thread score of 688 and 16-thread score of 4748 show moderate single-thread performance, which is critical for Roblox’s physics and game logic.

At 2560x1440, the spread between Low and Ultra widens to about 35%, indicating that the GPU is becoming more involved. The RTX 5090’s passmark G3D score of 39650 and its 3dmark steel nomad DX12 score of 18355 show immense rasterization capability, and the data confirms that it is being pushed harder at this resolution. The CPU still has enough headroom to maintain high frame rates, as the average at Low settings is 486 FPS.

At 3840x2160, the spread between Low and Ultra grows to about 35% as well, with Low at 275 FPS and Ultra at 179 FPS. This is the point where the GPU is the clear bottleneck, as the pixel throughput required at 4K is substantial. The RTX 5090’s pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s are being exercised more fully here. The CPU’s role diminishes, but it still holds the frame rate above 275 FPS at Low settings, which is far beyond the playable threshold.

Measured FPS Breakdown

At 3840x2160, the measurements show a clear hierarchy. Low settings average 275 FPS with no recorded minimum or maximum values. Medium settings average 250 FPS, with a minimum of 212 FPS and a maximum of 287 FPS. High settings average 221 FPS, and Ultra settings average 179 FPS. The minimum frame rate at Medium, 212 FPS, is still more than three times the 60 FPS threshold, which indicates that even in the most demanding scenes, the system does not drop below a comfortable level.

At 2560x1440, the data shows a significant jump in performance. Low settings average 486 FPS, Medium averages 442 FPS with a minimum of 376 FPS and a maximum of 508 FPS, High averages 391 FPS, and Ultra averages 317 FPS. The minimum frame rate at Medium, 376 FPS, is over six times the playable threshold. The scaling from 4K to 1440p is consistent across all presets, with an average uplift of roughly 78% to 82% depending on the preset.

At 1920x1080, the measurements approach the upper limits of what the test methodology can capture. Low settings average 581 FPS, Medium averages 563 FPS with a minimum of 478 FPS and a maximum of 647 FPS, High averages 539 FPS, and Ultra averages 475 FPS. The minimum frame rate at Medium, 478 FPS, is nearly eight times the 60 FPS threshold. The differences between presets are smaller here, which reinforces the idea that the CPU is the limiting factor at this resolution.

How This Combo Ranks

The combination of the Intel Core i5-10400F and the NVIDIA GeForce RTX 5090 ranks 181st out of 3711 tested combinations in the database for Roblox. This places it in the top 5% of all tested systems, which is notable given that the CPU is a mid-range part from 2020. The RTX 5090 is the primary driver of this ranking, as its average benchmark score of 79842 places it in the 92nd percentile of all GPUs. The i5-10400F, with an average benchmark score of 14185, sits in the 68th percentile of all CPUs.

The ranking indicates that the system outperforms the vast majority of tested combinations, but it does not reach the very top of the leaderboard. The gap between rank 181 and the top spot is likely due to CPU-bound scenarios at lower resolutions, where a faster processor would extract even more frame rate from the RTX 5090. However, for practical purposes, the system is already delivering frame rates that are far beyond what any display can refresh, so the ranking is more of a theoretical measure than a practical limitation.

The data shows that the combo’s performance is consistent with what would be expected from a high-end GPU paired with a capable but not top-tier CPU. The 68th percentile CPU ranking and 92nd percentile GPU ranking combine to produce a system that is in the top 5% of all tested combos, which is a strong result for a pairing that does not include a flagship processor.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-10400F provide a reference for what other CPUs would perform similarly. The Intel Xeon 6756E has an average score of 14163, which is 0.2% lower than the i5-10400F’s 14185. The AMD Ryzen 3 7320C has an average score of 14277, which is 0.6% higher. The AMD EPYC 7552 scores 14115, which is 0.5% lower, and the Intel Core 7 160UL scores 14232, which is 0.3% higher. These deltas are all within a fraction of a percent, meaning that swapping the i5-10400F for any of these processors would result in nearly identical frame rates in Roblox.

For the NVIDIA GeForce RTX 5090, the nearest rivals include the NVIDIA Tesla P100 PCIe 16 GB, which scores 79605, a 0.3% difference from the RTX 5090’s 79842. The NVIDIA Tesla P100 PCIe 12 GB scores 79396, a 0.6% difference, and the AMD Radeon RX 6850M XT scores 78940, a 1.1% difference. The AMD Radeon Pro Vega 64X scores 80959, which is 1.4% higher than the RTX 5090. These alternatives would produce almost identical performance in Roblox, though the Tesla and Radeon Pro cards are not consumer gaming products.

The data indicates that the system has no weak link that would cause a meaningful performance drop. Any of the listed rival components would maintain the same playability profile, with all resolutions and presets staying well above the 60 FPS threshold. The RTX 5090’s nearest rivals are all within a small margin, so the choice of GPU among these would not change the gaming experience.

The Verdict

The data unequivocally shows that this PC can run Roblox at the highest possible settings at every tested resolution. At 3840x2160, the verdict lists High, Low, Medium, and Ultra as playable settings, with Ultra being the best option at an average of 179 FPS. At 2560x1440, all four settings are playable, with Ultra averaging 317 FPS. At 1920x1080, the same is true, with Ultra averaging 475 FPS. The playable threshold is 60 FPS, and the lowest average frame rate recorded across all tests is 179 FPS, which is nearly three times that threshold.

The system is not just playable; it is overkill for Roblox. The game’s art style and physics engine are not demanding enough to stress the RTX 5090 at any resolution, and the i5-10400F provides enough single-thread performance to avoid becoming a bottleneck. The minimum frame rates recorded at Medium settings, such as 212 FPS at 4K and 376 FPS at 1440p, confirm that even in the most intense scenes, the frame rate never dips below a level that would be noticeable on any current display.

For users with a 4K 120Hz or 144Hz monitor, the system will hold the refresh rate at Ultra settings without issue. For 1440p 240Hz or higher displays, the system will also keep up, as the average frame rate at Ultra is 317 FPS. At 1080p, the system is so far beyond the monitor’s capabilities that it would be limited by the display’s refresh rate rather than the hardware. The recorded data shows a system that is ready for any current display technology, and it will remain playable for years to come.