Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Red Dead Redemption 2
Action Adventure 2018

Red Dead Redemption 2

47%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
79 FPS
Ultra 1080p Measured
36 FPS

1440p (2K / QHD)

Low 1440p Measured
59 FPS
Ultra 1440p Measured
27 FPS

4K (Ultra HD)

Low 4K Measured
39 FPS
Ultra 4K Measured
18 FPS
20.4ms Frame Time
31ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,552
Your CPU 13,494
Graphics Card
Required 29,150
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 24 29 39
1440p QHD 27 37 44 59
1080p Full HD 36 49 59 79

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 49
1920x1080 Low 79
1920x1080 Medium 59
1920x1080 Ultra 36
2560x1440 High 37
2560x1440 Low 59
2560x1440 Medium 44
2560x1440 Ultra 27
3840x2160 High 24
3840x2160 Low 39
3840x2160 Medium 29
3840x2160 Ultra 18

Performance Analysis: Red Dead Redemption 2 on Your System

Red Dead Redemption 2 is a demanding action-adventure title that stresses both CPU and GPU. The combination of an Intel Core i3-12100F and an Intel Arc B570 delivers playable performance only at 1080p with Low settings, according to measured frame rates. This report details the exact FPS at each resolution and preset, examines how the CPU and GPU contribute, compares this setup to nearby hardware, and provides clear guidance on which settings are viable.

FAQ

Q: What is the average FPS at 1080p Low?

A: The system averages 79 FPS at 1920x1080 with Low settings, which is above the 60 FPS playable threshold.

Q: Can this combo run Red Dead Redemption 2 at 1440p?

A: No. The best result at 2560x1440 is 59 FPS at Low, just below the 60 FPS threshold. Medium averages 44, High 37, and Ultra 27.

Q: What is the most demanding preset that stays at or above 60 FPS at any resolution?

A: Only 1080p Low achieves 79 FPS. No other resolution or preset reaches 60 FPS.

Q: How does the GPU compare to its nearest rivals?

A: The Arc B570 has an average benchmark score of 20556. The Intel Arc A750 scores 20582 (0.1% higher), and the NVIDIA GeForce RTX 3070 Mobile scores 20534 (0.1% lower). These are effectively equivalent in performance.

Q: How does the CPU compare to its nearest rivals?

A: The Core i3-12100F has an average benchmark score of 13494. The Intel Core 3 N355 scores 13492 (0% delta), and the Core i5-9500 scores 13452 (0.3% higher). All nearest rivals are within 1.1% delta.

CPU and GPU Roles

The measured FPS data reveals a clear division of labor. At 1080p, the system scales from 79 FPS at Low to 36 FPS at Ultra, a drop of 43 FPS across the four presets. At 1440p, the same spread is 32 FPS (59 to 27), and at 4K it narrows to 21 FPS (39 to 18). This shrinking absolute gap as resolution increases is a classic sign of GPU saturation: once the GPU is fully loaded, raising settings has less impact because the renderer is already near its limit.

The CPU, a 4-core/8-thread Alder Lake part with a boost clock of 4.30 GHz and 12 MB of L3 cache, is not the primary constraint. At 1080p Low, the system reaches 79 FPS, well above the playable threshold, indicating the CPU can feed the GPU adequately at that load. When settings are raised to Medium, FPS falls to 59, a drop of 20 FPS, which points to the GPU becoming the bottleneck. At 1440p and 4K, even Low settings cannot sustain 60 FPS (59 and 39 FPS respectively), reinforcing that the GPU is the limiting factor.

The GPU, with 10 GB of GDDR6 memory and a 160-bit bus, has a Passmark G3D score of 14195 and a 3DMark Steel Nomad score of 2649. Its memory bandwidth is 380.0 GB/s, which is sufficient for this title at moderate settings. However, the data shows that the card’s raw throughput is simply not enough for high resolutions or demanding presets. At 1080p Medium, the average of 59 FPS is just one frame short of the playable mark, and at 1440p Low it is also 59. This suggests that the GPU is the decisive component across all tested configurations.

Similar Performance Alternatives

The Core i3-12100F’s nearest rivals, based on average benchmark score, are the Intel Core 3 N355 (13492, 0% delta), Intel Core i5-9500 (13452, 0.3% higher), Intel Core 5 120UL (13594, 0.7% lower), and Intel Core i7-1250U (13351, 1.1% higher). Any of these CPUs would be expected to deliver nearly identical frame rates in Red Dead Redemption 2, since the game’s CPU demands are similar and the delta is negligible.

For the GPU, the Arc B570’s closest competitors are the NVIDIA GeForce RTX 3070 Mobile (20534, 0.1% higher), Intel Arc A750 (20582, 0.1% lower), NVIDIA Quadro M4000M (20480, 0.4% higher), and AMD Radeon R9 M390X (20662, 0.5% lower). The Arc A750 is essentially a twin of the B570 in this benchmark, and the RTX 3070 Mobile is within 0.1%. A system with any of these GPUs would produce almost identical performance in this game.

Given these close scores, the measured FPS for the i3-12100F + Arc B570 combination can be treated as representative for any of the listed rivals. The combo’s ranking of 2990 out of 3714 tested combinations places it in the lower portion of the field, consistent with a mid-range GPU paired with an entry-level desktop CPU.

How This Combo Ranks

The combination ranks 2990 out of 3714 tested CPU-GPU pairs for Red Dead Redemption 2. This is a low position, indicating that the vast majority of tested configurations deliver higher frame rates. The CPU sits in the 68th percentile of all CPUs, and the GPU in the 65th percentile of all GPUs, but their pairing does not boost the overall result because the GPU’s performance ceiling is the limiting factor.

The ranking reflects the fact that the Arc B570, while capable at 1080p, cannot sustain 60 FPS at 1440p or 4K in this title. Even at 1080p, only the Low preset clears the threshold. The CPU’s strong single-thread performance (Cinebench R23 single-core score of 1674) does not compensate for the GPU’s limitations at higher resolutions. This is a classic case where the GPU is the bottleneck, and upgrading the GPU would have a far greater impact than swapping the CPU.

The Verdict

This PC can run Red Dead Redemption 2, but only at 1920x1080 with the Low preset, where it averages 79 FPS. At 2560x1440 and 3840x2160, no preset reaches the 60 FPS playable threshold. The best result at 1440p is 59 FPS at Low, and at 4K it is 39 FPS at Low. Therefore, the system is playable at 1080p Low, but not at higher resolutions or with more demanding settings.

Best Settings per Resolution

  • 1920x1080: Low (79 FPS) is the only playable preset. Medium averages 59, High 49, and Ultra 36.
  • 2560x1440: No preset reaches 60 FPS. Low averages 59, Medium 44, High 37, and Ultra 27.
  • 3840x2160: No preset reaches 60 FPS. Low averages 39, Medium 29, High 24, and Ultra 18.

Measured FPS Breakdown

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 24 | - | - |

| 3840x2160 | Low | 39 | - | - |

| 3840x2160 | Medium | 29 | 25 | 34 |

| 3840x2160 | Ultra | 18 | - | - |

| 2560x1440 | High | 37 | - | - |

| 2560x1440 | Low | 59 | - | - |

| 2560x1440 | Medium | 44 | 38 | 51 |

| 2560x1440 | Ultra | 27 | - | - |

| 1920x1080 | High | 49 | - | - |

| 1920x1080 | Low | 79 | - | - |

| 1920x1080 | Medium | 59 | 50 | 68 |

| 1920x1080 | Ultra | 36 | - | - |

The data shows that the system is playable only at 1080p Low. For users targeting 60 FPS, the only viable configuration is 1080p with the lowest preset. At 1440p, the Low preset comes within one frame of the threshold, but the average of 59 FPS is not sufficient for a stable experience. At 4K, the system is clearly below playable levels across all settings.