Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Red Dead Redemption 2
Action Adventure 2018

Red Dead Redemption 2

20%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
51 FPS
Ultra 1080p Measured
23 FPS

1440p (2K / QHD)

Low 1440p Measured
38 FPS
Ultra 1440p Measured
17 FPS

4K (Ultra HD)

Low 4K Measured
25 FPS
Ultra 4K Measured
11 FPS
31.3ms Frame Time
47ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,552
Your CPU 13,494
Graphics Card
Required 29,150
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 11 16 19 25
1440p QHD 17 24 29 38
1080p Full HD 23 32 39 51

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 32
1920x1080 Low 51
1920x1080 Medium 39
1920x1080 Ultra 23
2560x1440 High 24
2560x1440 Low 38
2560x1440 Medium 29
2560x1440 Ultra 17
3840x2160 High 16
3840x2160 Low 25
3840x2160 Medium 19
3840x2160 Ultra 11

Performance Analysis: Red Dead Redemption 2 on Your System

The Intel Core i3-12100F paired with the Intel Arc B390 is a combination that ranks 3306 out of 3714 tested combos for Red Dead Redemption 2. This places it in the bottom 11% of all tested systems, indicating that this hardware configuration is not well suited for achieving a smooth experience in this particular title. Benchmark results across all resolutions and presets consistently fall below the 60 FPS threshold that defines playability in our database, with the best recorded average being 51 FPS at 1080p Low settings. The data shows a system that can render the game, but only at reduced visual quality and with frame rates that remain below the standard target.

How This Combo Ranks

The recorded data places this combo at rank 3306 out of 3714 total combinations tested for Red Dead Redemption 2. This percentile position, roughly the 11th percentile, reflects a hardware pairing that sits far below the median performance curve. The Intel Core i3-12100F itself holds a 68th percentile ranking among all CPUs, showing that the processor is a reasonably capable mid-range part. However, the Intel Arc B390 GPU sits at only the 9th percentile among all GPUs, which drags the overall combination down considerably. The bottleneck is overwhelmingly on the graphics side, as the CPU's relative strength cannot compensate for the GPU's limited throughput in this demanding title.

When examining the measured FPS data, the pattern is consistent: no resolution or preset combination reaches 60 FPS. At 1080p Low, the system manages 51 FPS average, which is the highest recorded value across all tests. Moving to Medium settings at 1080p drops the average to 39 FPS, and High settings yield only 32 FPS. At 1440p, the numbers fall further, with Low settings producing 38 FPS and High settings dropping to 24 FPS. The 4K results are the weakest, with even Low settings averaging just 25 FPS. These figures demonstrate that the combo sits in a performance tier that struggles with modern AAA titles, particularly one as graphically intensive as Red Dead Redemption 2.

FAQ

Q: Can this PC run Red Dead Redemption 2 at 60 FPS?

A: No. The database shows no resolution or preset combination that reaches the 60 FPS playable threshold. The best recorded average is 51 FPS at 1920x1080 with Low settings.

Q: What is the best performance this combo can achieve?

A: The highest average FPS recorded is 51 at 1920x1080 with Low settings. At Medium settings, the average drops to 39 FPS, with a minimum of 33 and maximum of 44 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i3-12100F has an average benchmark score of 13494. It is essentially tied with the Intel Core 3 N355 (13492, 0% delta), slightly ahead of the Intel Core i5-9500 (13452, 0.3% delta), and slightly behind the Intel Core 5 120UL (13594, -0.7% delta).

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B390 has an average benchmark score of 1482. It is slightly ahead of the NVIDIA GeForce GT 520MX (1463, 1.3% delta), the NVIDIA GeForce 800M (1460, 1.5% delta), the NVIDIA GeForce GT 625 OEM (1446, 2.5% delta), and the NVIDIA GeForce GT 710 (1443, 2.7% delta).

Q: Is the CPU or GPU the limiting factor?

A: The GPU is the clear limiting factor. The CPU ranks at the 68th percentile among all processors, while the GPU ranks at only the 9th percentile among all graphics cards. The GPU's low standing dominates the combo's overall performance.

Q: What happens when increasing resolution?

A: Performance degrades steadily as resolution increases. From 1080p Low (51 FPS) to 1440p Low (38 FPS), there is a 25% drop. From 1440p Low to 4K Low (25 FPS), there is an additional 34% drop. Higher presets show even steeper declines.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the CPU and GPU in this pairing. The Intel Core i3-12100F, with its 4 cores and 8 threads, ranks in the 68th percentile among all CPUs. It is a competent processor for gaming, as evidenced by its Cinebench R23 multi-core score of 11860 and single-core score of 1674. The CPU is not the primary constraint in this system.

The Intel Arc B390, however, is a different story. Ranking at the 9th percentile among all GPUs, this integrated graphics solution is severely limited in raw compute power. Its 3DMark Steel Nomad DX12 score of 1482 places it in the company of legacy NVIDIA parts like the GT 710 and GT 520MX. The GPU's FP32 throughput of 7.680 TFLOPS and 24 ROPs are simply insufficient for a game like Red Dead Redemption 2 at modern resolutions.

The scaling between resolutions confirms this GPU-bound scenario. At 1080p, the combo achieves 51 FPS on Low settings. When resolution increases to 1440p, the same preset drops to 38 FPS, a 25% reduction. Moving to 4K, the Low preset falls to 25 FPS, another 34% reduction. These drops are consistent with a GPU that is overwhelmed by pixel throughput demands. The CPU's role becomes less relevant as resolution increases, because the GPU's fill rate and shading capacity become the sole limiting factor.

Preset scaling tells the same story. At 1080p, going from Low to Medium costs 12 FPS (51 to 39), Medium to High costs 7 FPS (39 to 32), and High to Ultra costs 9 FPS (32 to 23). The performance penalty for each preset tier is substantial, which is typical of a GPU that has very little headroom. In contrast, a stronger GPU would show smaller relative drops between presets because the CPU would begin to factor into the equation at lower resolutions.

Similar Performance Alternatives

For the Intel Core i3-12100F, the nearest rivals in the database are all within a 2% performance band. The Intel Core 3 N355 matches it almost exactly with a score of 13492 versus 13494, a 0% delta. The Intel Core i5-9500 scores 13452, just 0.3% lower. The Intel Core 5 120UL scores 13594, which is 0.7% higher. The Intel Core i7-1250U scores 13351, 1.1% lower. Any of these processors would behave nearly identically in Red Dead Redemption 2 when paired with the same GPU, since the CPU is not the limiting factor in this configuration.

For the Intel Arc B390, the nearest rivals are all significantly older NVIDIA parts. The NVIDIA GeForce GT 520MX scores 1463, 1.3% lower. The NVIDIA GeForce 800M scores 1460, 1.5% lower. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5% lower. The NVIDIA GeForce GT 710 scores 1443, 2.7% lower. These GPUs would produce nearly identical frame rates in Red Dead Redemption 2, meaning that swapping the Arc B390 for any of these alternatives would not meaningfully change the gaming experience. Conversely, upgrading to a GPU with even a modestly higher benchmark score would be required to see any real improvement in this title.

Measured FPS Breakdown

At 3840x2160, the combo delivers its weakest results. Low settings produce an average of 25 FPS. Medium settings drop to 19 FPS average, with a minimum of 16 and maximum of 22 FPS. High settings average 16 FPS. Ultra settings average 11 FPS. None of these values approach the 60 FPS target, and even the most forgiving preset fails to maintain a consistent frame rate.

At 2560x1440, performance improves but remains far from playable. Low settings average 38 FPS. Medium settings average 29 FPS, with a minimum of 24 and maximum of 33 FPS. High settings average 24 FPS. Ultra settings average 17 FPS. The 38 FPS at Low is the only 1440p result that approaches a console-like frame rate, but it still falls short of the 60 FPS threshold.

At 1920x1080, the best results are recorded. Low settings average 51 FPS, the highest of any configuration tested. Medium settings average 39 FPS, with a minimum of 33 and maximum of 44 FPS. High settings average 32 FPS. Ultra settings average 23 FPS. While the Low preset comes within 9 FPS of the playable threshold, it still does not cross it.

The Verdict

The verdict data is unambiguous: this PC cannot run Red Dead Redemption 2 at a playable frame rate. The verdictByResolution field shows no playable settings at any resolution. At 3840x2160, 2560x1440, and 1920x1080, the playableSettings list is empty, and there is no best settings recommendation because no configuration reaches the 60 FPS threshold.

The Intel Core i3-12100F is a capable processor, but the Intel Arc B390 is the decisive weakness. With a GPU that ranks in the 9th percentile of all graphics cards, the system simply lacks the rendering power to handle this game's demands. Even at the lowest resolution and preset combination, the average frame rate remains below the playable threshold. Users considering this hardware for Red Dead Redemption 2 should expect a sub-60 FPS experience at all times, with the best case scenario being 51 FPS at 1080p Low.

Best Settings per Resolution

At 3840x2160, there is no preset that maintains 60 FPS. The best recorded result is Low settings at 25 FPS average, which is far below the playable threshold.

At 2560x1440, there is also no playable preset. Low settings achieve 38 FPS average, which is the highest at this resolution but still 22 FPS short of the target.

At 1920x1080, the best option is Low settings, which delivers 51 FPS average. This is the only configuration that comes close to the 60 FPS threshold, but it still falls short. Medium settings produce 39 FPS average, High settings 32 FPS, and Ultra settings 23 FPS. For users who prioritize frame rate over visual quality, 1080p Low is the recommended preset, accepting that the experience will not reach the standard playable threshold.