Instant compatibility check with FPS benchmarks and optimization tips
Ready Or Not
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 50 | 55 | 63 |
| 1440p QHD | 67 | 96 | 105 | 121 |
| 1080p Full HD | 107 | 152 | 167 | 192 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Ready Or Not on Your System
Intel Core i5-10400F and Intel Arc B570 form a mid-range pairing that handles Ready Or Not well at most settings, but the game’s demands scale sharply with resolution. At 1080p and 1440p, this combo delivers strong frame rates across all presets, while 4K requires dropping to lower settings to maintain smooth gameplay. The data shows a clear pattern: the CPU keeps up at lower resolutions, but the GPU becomes the limiting factor as pixel count rises.
CPU and GPU Roles
The recorded measurements for this combo show that the Arc B570’s workload increases significantly as resolution climbs, while the i5-10400F remains a steady partner. At 1920x1080, the average FPS ranges from 192 on Low to 107 on Ultra, a drop of 85 FPS between the lightest and heaviest presets. This indicates that at 1080p, the CPU has enough headroom to feed the GPU, and the frame rate is largely dictated by the graphics card’s rendering load. Moving to 2560x1440, the averages fall to 121 on Low and 67 on Ultra, showing a 54 FPS spread. The scaling from 1080p to 1440p is roughly 37% slower on Low (192 to 121) and 37% slower on Ultra (107 to 67), which points to the GPU being the primary bottleneck as resolution increases.
At 3840x2160, the situation changes dramatically. The average FPS drops to 63 on Low, 55 on Medium, 50 on High, and 35 on Ultra. From 1440p to 4K, the Low preset falls from 121 to 63, a 48% reduction, while Ultra falls from 67 to 35, a 48% reduction as well. This consistent percentage drop across presets suggests that the GPU’s pixel throughput is the dominant constraint at 4K, and the CPU’s role becomes secondary. The i5-10400F’s six cores and twelve threads are sufficient to avoid bottlenecking the Arc B570 at lower resolutions, but at 4K, the graphics card’s raw compute limits the experience, regardless of CPU headroom.
The fact that the gap between Low and Ultra widens from 85 FPS at 1080p to 32 FPS at 4K further confirms this. At 1080p, the CPU can push higher frame rates, but the GPU still has to process more complex scenes on Ultra, creating a larger delta. At 4K, both presets are constrained by the GPU, so the difference narrows. For this combo, the CPU is the enabler at 1080p and 1440p, while the GPU is the decisive factor at 4K. Players targeting high refresh rates at 1080p will find the CPU adequate, but those aiming for 4K should focus on the GPU’s limitations.
FAQ
*Q: Can this combo run Ready Or Not at 60 FPS on 1080p?*
A: Yes, all four presets at 1920x1080 exceed 60 FPS. The lowest average is 107 FPS on Ultra, while Low reaches 192 FPS, Medium hits 167 FPS, and High sits at 152 FPS.
Q: What is the best preset at 1440p for this system?
A: Ultra is playable at 2560x1440 with an average of 67 FPS, which is above the 60 FPS threshold. Low, Medium, and High also work, with averages of 121, 105, and 96 FPS respectively, but Ultra offers the highest visual quality while staying above 60.
Q: Is 4K playable with this hardware?
A: Only at Low settings. The 3840x2160 Low preset averages 63 FPS, which is just above the 60 FPS playable threshold. Medium averages 55 FPS, High averages 50 FPS, and Ultra averages 35 FPS, all of which fall below the threshold.
Q: How does the Arc B570’s performance compare to its nearest rivals?
A: The Arc B570’s average benchmark score is 20556, which is 0.1% higher than the NVIDIA GeForce RTX 3070 Mobile (20534) and 0.1% lower than the Intel Arc A750 (20582). It also sits 0.4% above the Quadro M4000M and 0.5% below the Radeon R9 M390X, showing it is tightly clustered with these alternatives.
Q: Does the CPU hold back the GPU at any resolution?
A: At 1080p and 1440p, the i5-10400F appears sufficient, as frame rates scale consistently with GPU load. At 4K, the GPU is the clear bottleneck, with all presets showing reduced averages, indicating the CPU is not the limiting factor at higher resolutions.
Q: What is the lowest FPS recorded for this combo?
A: The minimum FPS recorded is 47, which occurs at 3840x2160 on Medium settings. The maximum FPS recorded is 192, seen at 1920x1080 on Low settings.
How This Combo Ranks
In the database of tested combinations, this CPU and GPU pairing ranks 2984 out of 3714 total combos for Ready Or Not. This places it in the lower half of all tested systems, but the rank reflects the entire spectrum of hardware, including much more powerful CPUs and GPUs. Within its own class, the combo performs adequately, as the measured FPS data shows it can handle the game at 1080p and 1440p with ease. The rank of 2984 suggests that while this is not a top-tier setup, it is far from the bottom, and it offers a balanced experience for the resolution and settings tested.
The percentile data for the individual components provides context. The i5-10400F sits at the 68th percentile among all CPUs, meaning it outperforms a majority of processors in general benchmarks. The Arc B570 is at the 65th percentile among all GPUs, also above average. However, the game-specific combo rank is lower than these percentiles might imply, indicating that Ready Or Not is demanding enough to push this pairing down relative to other tested systems. The gap likely comes from more powerful GPUs in other combos, which pull ahead at higher resolutions and settings.
Measured FPS Breakdown
At 1920x1080, the combo delivers its strongest results. On Low settings, the average FPS is 192, with no minimum or maximum recorded. Medium drops to 167 average, with a minimum of 142 and a maximum of 192. High averages 152 FPS, and Ultra averages 107 FPS. All presets stay well above the 60 FPS playable threshold, making 1080p the most comfortable resolution for this hardware.
At 2560x1440, the averages remain solid but show the GPU’s increasing load. Low averages 121 FPS, Medium averages 105 FPS with a minimum of 90 and a maximum of 121, High averages 96 FPS, and Ultra averages 67 FPS. The Ultra preset is the only one that approaches the 60 FPS threshold, but it still clears it by 7 FPS on average. The minimum FPS of 90 on Medium indicates that even in demanding scenes, the frame rate does not dip below playable levels.
At 3840x2160, the performance drops significantly. Low averages 63 FPS, which is just above the 60 FPS threshold. Medium averages 55 FPS, with a minimum of 47 and a maximum of 63, meaning some scenes will drop below playable levels. High averages 50 FPS, and Ultra averages 35 FPS, both of which are not playable for smooth gameplay. The data shows that 4K is only viable on the lowest preset, and even then, the margin is slim.
Similar Performance Alternatives
The i5-10400F’s nearest rivals in the database are all within a fraction of a percent in average benchmark score. The Intel Xeon 6756E scores 14163, which is 0.2% lower than the i5-10400F’s 14185. The Intel Core 7 160UL scores 14232, 0.3% higher. The AMD EPYC 7552 scores 14115, 0.5% lower, and the AMD Ryzen 3 7320C scores 14277, 0.6% higher. These CPUs would behave similarly in Ready Or Not, providing comparable CPU-bound performance at 1080p and 1440p. The differences are negligible, so swapping to any of these would not noticeably change frame rates.
For the GPU, the Arc B570’s nearest rivals are also closely matched. The NVIDIA GeForce RTX 3070 Mobile has an average score of 20534, 0.1% lower than the Arc B570’s 20556. The Intel Arc A750 scores 20582, 0.1% higher. The NVIDIA Quadro M4000M scores 20480, 0.4% lower, and the AMD Radeon R9 M390X scores 20662, 0.5% higher. These GPUs would produce nearly identical frame rates in Ready Or Not, meaning the choice between them comes down to other factors like driver support or features, not raw performance.
Best Settings per Resolution
At 1920x1080, the best preset is Ultra, which averages 107 FPS. This is the highest quality setting that remains well above the 60 FPS threshold, offering the best visual experience without sacrificing smoothness. Players can use Ultra confidently at this resolution.
At 2560x1440, Ultra is also the best choice, averaging 67 FPS. This clears the 60 FPS threshold by a small margin, so it is playable, but players who prefer a larger buffer might drop to High, which averages 96 FPS. The data shows Ultra is technically playable, but High offers a more comfortable margin.
At 3840x2160, the only playable preset is Low, averaging 63 FPS. This is just above the 60 FPS threshold, so it is acceptable for 4K gaming, but there is little headroom for demanding scenes. Medium averages 55 FPS and falls below the threshold, so Low is the recommended setting for 4K.