Instant compatibility check with FPS benchmarks and optimization tips
Ready Or Not
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 33 | 36 | 41 |
| 1440p QHD | 44 | 62 | 69 | 79 |
| 1080p Full HD | 69 | 99 | 109 | 125 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Ready Or Not on Your System
The Intel Core i5-10400F paired with the Intel Arc B390 is an unusual combination: a mid-range desktop CPU from 2020 driving an integrated graphics solution that shares system memory. The database contains measured frame rates for Ready Or Not across three resolutions and four quality presets, and the results show a system that can handle the game at 1080p and 1440p, but falls short at 4K. This analysis breaks down exactly where this combo stands.
Measured FPS Breakdown
The recorded data covers 3840x2160, 2560x1440, and 1920x1080, each with Low, Medium, High, and Ultra settings. Only the Medium preset at each resolution includes minimum and maximum frame times; the other presets report only the average.
At 4K (3840x2160), the numbers are consistently below the 60 FPS playability threshold. Low averages 41 FPS, Medium averages 36 FPS with a minimum of 30 and a maximum of 41, High averages 33 FPS, and Ultra drops to 23 FPS. No preset at this resolution comes close to 60 FPS, and even the lowest settings leave the system at roughly two-thirds of the target.
At 1440p (2560x1440), the situation improves significantly. Low averages 79 FPS, Medium averages 69 FPS with a minimum of 58 and a maximum of 79, High averages 62 FPS, and Ultra falls to 44 FPS. The jump from 4K to 1440p is substantial: Low goes from 41 to 79 FPS, a 93% increase. Medium goes from 36 to 69, High from 33 to 62, and Ultra from 23 to 44. This scaling suggests the GPU is heavily resolution-bound.
At 1080p (1920x1080), every preset clears 60 FPS. Low averages 125 FPS, Medium averages 109 FPS with a minimum of 92 and a maximum of 125, High averages 99 FPS, and Ultra averages 69 FPS. Even the most demanding preset, Ultra, stays above 60, though the gap between Low and Ultra is 56 FPS, indicating that the GPU still carries the load. The minimum recorded at Medium (92 FPS) shows that even in demanding scenes, the system holds well above the threshold.
The lack of min/max data for most presets means we cannot fully assess frame pacing, but the available numbers for Medium at each resolution give a sense of variance. At 1440p Medium, the range is 58 to 79, a 21 FPS spread, which is noticeable but not severe. At 1080p Medium, the range is 92 to 125, a 33 FPS spread, suggesting occasional dips but still far above 60. At 4K Medium, the range is 30 to 41, which is tight but at a low average.
Best Settings per Resolution
The database defines playable as an average of 60 FPS or higher. At 3840x2160, no settings meet that criterion, so there is no best setting; the verdict list is empty.
At 2560x1440, three presets are playable: Low (79 FPS), Medium (69 FPS), and High (62 FPS). Ultra is not playable at 44 FPS. The best setting, meaning the most demanding preset that still stays at or above 60 FPS, is High with an average of 62 FPS. This is a narrow margin, only 2 FPS above the threshold, but it is the highest quality option that remains playable. Medium offers a more comfortable 69 FPS, but High is the top choice if visual fidelity is the priority.
At 1920x1080, all four presets are playable. The best setting is Ultra, with an average of 69 FPS. This is 9 FPS above the threshold, so there is some headroom, but it is not a large cushion. High (99 FPS), Medium (109 FPS), and Low (125 FPS) all provide far more comfortable margins, but Ultra is the most demanding preset that still clears 60. For a player who wants maximum quality at 1080p, Ultra is viable, though a drop to High would double the frame rate headroom.
CPU and GPU Roles
The data clearly indicates that the Intel Arc B390 integrated GPU is the primary bottleneck in this combo, not the Core i5-10400F. The CPU holds a percentile ranking of 68 among all tested processors, meaning it outperforms 68% of the field. Its nearest rivals in the database include the Intel Xeon 6756E (0.2% faster), Intel Core 7 160UL (0.3% slower), AMD EPYC 7552 (0.5% faster), and AMD Ryzen 3 7320C (0.6% slower). These are all within a 1% band, showing that the i5-10400F sits in a stable mid-range position. Its multi-threaded scores, such as 10,283 in Cinebench R23, are respectable for a 6-core part.
The GPU, on the other hand, ranks in the 9th percentile among all graphics cards, with a 3DMark Steel Nomad DX12 score of 1482. Its nearest rivals are all ancient low-end parts: the GeForce GT 520MX (1.3% slower), GeForce 800M (1.5% slower), GeForce GT 625 OEM (2.5% slower), and GeForce GT 710 (2.7% slower). This places the Arc B390 in the same performance class as decade-old entry-level discrete cards, despite being an integrated solution with system-shared memory. The GPU's memory bandwidth is listed as "System Dependent," meaning its performance scales with the host system's memory speed and configuration.
The resolution scaling in the measured FPS data confirms the GPU bottleneck. Moving from 1080p to 1440p at Low settings drops the average from 125 to 79 FPS, a 37% reduction. From 1440p to 4K at Low, it drops from 79 to 41, a 48% reduction. This steep decline with resolution is typical of a GPU-limited scenario, where the pixel fill rate and memory bandwidth become the limiting factors. The CPU is unlikely to be the constraint because even at 4K Low, the system only manages 41 FPS, which is far below what a 6-core/12-thread Comet Lake chip could feed if the GPU were faster.
The settings scaling also points to GPU dominance. At 1080p, going from Low to Ultra reduces the average from 125 to 69 FPS, a 45% drop. At 1440p, the same transition goes from 79 to 44, a 44% drop. At 4K, from Low to Ultra it goes from 41 to 23, a 44% drop. This consistent ~44-45% reduction across all resolutions indicates that the GPU's shading and memory resources are the limiting factor, not the CPU's ability to process game logic or draw calls. The CPU's single-thread performance, as shown by a Geekbench single-core score of 1420, is sufficient for a tactical shooter like Ready Or Not, which is not known for extreme CPU demands.
In summary, the i5-10400F provides more than enough compute headroom for this game, while the Arc B390's integrated graphics architecture and shared memory are the reason the system cannot reach 60 FPS at 4K and only barely clears it at 1440p High.
How This Combo Ranks
In the database's ranking of all tested CPU+GPU combinations for Ready Or Not, this pairing sits at position 3300 out of 3714. That places it in the bottom 11% of tested combos, meaning 414 combinations perform worse and 3299 perform better. The rank reflects the overall playability across the tested resolutions and presets.
The GPU's low percentile (9) heavily drags down the combo's position. The CPU's percentile (68) is far more respectable, but the combination is only as strong as its weakest link. The nearest GPU rivals, such as the GT 710 and GT 520MX, are all integrated or low-end parts from a decade ago, and the Arc B390's performance is within 3% of those. This explains why the combo ranks so poorly: the GPU is simply not designed for modern gaming at high resolutions.
It is worth remembering the combo does achieve playable frame rates at 1080p and 1440p, which is more than many older integrated graphics solutions could manage. However, the rank of 3300 indicates that the majority of systems in the database outperform it, largely due to having dedicated graphics cards with higher fill rates and dedicated VRAM.
FAQ
Q: Can this system run Ready Or Not at 1080p?
A: Yes. All four presets (Low, Medium, High, Ultra) average above 60 FPS at 1920x1080. The best setting is Ultra at 69 FPS.
Q: What is the highest playable setting at 1440p?
A: High is the most demanding preset that stays at or above 60 FPS, with an average of 62 FPS. Medium (69 FPS) and Low (79 FPS) are also playable, but Ultra is not (44 FPS).
Q: Is 4K playable with this combo?
A: No. At 3840x2160, the best average is 41 FPS on Low, and all other presets are lower. None reach the 60 FPS threshold.
Q: Which component is the bottleneck?
A: The Intel Arc B390 GPU. Its benchmark percentile is 9, and its performance is within 3% of the GeForce GT 710. The CPU, in contrast, ranks in the 68th percentile.
Q: How does this combo rank compared to other tested systems?
A: It ranks 3300 out of 3714, placing it in the bottom 11% of tested combos for Ready Or Not.
Q: What is the average FPS at 1080p Medium?
A: The average is 109 FPS, with a minimum of 92 and a maximum of 125.
The Verdict
The Intel Core i5-10400F + Intel Arc B390 can run Ready Or Not, but only at 1080p and 1440p, and only with careful settings choices. At 1920x1080, the system clears 60 FPS on every preset, with Ultra averaging 69 FPS. This is the best setting for visual quality while maintaining playability. At 2560x1440, the best playable setting is High at 62 FPS, which is a thin margin; players who prefer a larger safety buffer should use Medium at 69 FPS or Low at 79 FPS. At 3840x2160, no preset reaches 60 FPS, so 4K is not a viable option for this hardware.
The verdict by resolution is clear: 1080p and 1440p are playable, 4K is not. The bottleneck is the integrated GPU, which, despite its modern Xe architecture, performs at the level of entry-level cards from over a decade ago. The CPU is more than adequate for this title, so any future upgrade to a dedicated graphics card would dramatically improve the experience. As it stands, this combo is a workable 1080p machine for Ready Or Not, and a passable 1440p machine if the player accepts a moderate quality preset.